| Content |
• Simply & Professional appearance for BNC cabling
• Easier for camera installation, save time and more securer cable connection
• Better quality termination
• No electrical tap, No splicing, no crimping, but only a small screw driver
• Material: Copper Pin and Zinc Alloy Body
| Impedance |
50Ω,75Ω |
Frequency range |
0~2GHz |
| Resistanc |
Inner conductor ≤2.0mΩ |
External resistance |
≤0.2mΩ |
| Insulation Resistance |
≥5000MΩ |
Medium pressure |
1500V |
| Durability |
500 times |
Center Pin |
zinc alloy |
| Materials |
zinc alloy |
Frequency response |
DC to 8 MHz |
| Attenuation |
0.5dB typ |
Humidity |
0 to 95% |
| Storage |
-30°C to +70°C |
Material |
ABS Zinc |
| Wire Type |
coaxial cable |
Center Contact |
≤ 1.5 ohm |
| DC Loop Resistance |
52 ohms per 1,000 ft |
Environmental |
-10°C to +70°C |
| Withstand Voltage |
1500V rms |
|
|
| Outer Contact: |
≤ 1 ohm |
|
|
|
- For Pre-Assembled RJ45 Plugs
- Lockable Cable Connection Carrier
- Die-Cast Shell with Bushing & Boot
- Up to 0.31" Cable Diameter
- Chuck-Style Strain Relief
- RJ45 Plug Not Included
RJ45 cable connector carrier for pre-assembled RJ45 plugs consists of black chromium shell, bushing and boot. Packed with two cable protection elements for cable diameter up to 8 mm. Cable connector carrier does not include a RJ45 plug.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.
Neutrik NE8MX-B Overview
Upgrade the protection of a pre-assembled RJ45 plug with the NE8MX-B etherCON RJ45 Cable Connector Carrier for Pre-Assembled RJ45 Plugs from Neutrik. Boasting a black chromium die-cast shell, bushing, and boot, the NE8MX-B comes with chuck-style strain relief, as well as two cable-protection elements for cable diameters up to 0.31".
Note: The NE8MX-B does not include an RJ45 plug, and it does not intermate with Neutrik NE8FDY-C6 and NE8FDY-C6-B Cat 6 chassis connectors.
Ideal for harsh and demanding environments, the NE8MX-B is designed to protect Ethernet connections in a variety of commercial applications, and it helps to prevent breakage of the fragile components of standard RJ45 connectors. The carrier allows for the assembly of pre-assembled conventional RJ45 cables.
AMP
- 5-554169-3
- 5-554720-3
- 5-554739-3
- 5-558530-2
- 5-558530-3
- 5-569530-3
- 5-569532-2
Black Box
- FM731
- FM730
Bomar
- 300068S
- 300568
DRAHTEX
- 220.0100
- 220.0200
- 220.0201
Eucon
- MPS-88R30
- MP-88R30
Hirose
- TM11
- TM21
- TM31
Nippon Seisen
- NSP624-S
Stewart
- SS-37000-002
Vertical Cable
- 012-021
|
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer
in harsh demanding environments by offering a cable carrier and receptacle
that helps to protect the contacts of the RJ45 connections. Designed to
protect the fragile latch and cover of standard RJ45 connectors from breakage,
you will find uses for this connector system in Ethernet networking of audio,
commercial, entertainment, stage production, DMX lighting, industrial and
outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female
receptacles. The cable end offers a robust diecast shell as a carrier for pre-
assembled RJ45 plugs. Female chassis connectors are based on the current
Neutrik "A" series as well the "D" series of XLR receptacles with secure latching
system - a feature not found on other RJ45 receptacles. Termination is offered
in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products
comply with Category 5 shielded or unshielded and are compatible for use with
10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC Krone
terminals, "D" style ? Mfg. #NE8FDV-YK |
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer
in harsh demanding environments by offering a cable carrier and receptacle
that helps to protect the contacts of the RJ45 connections. Designed to
protect the fragile latch and cover of standard RJ45 connectors from breakage,
you will find uses for this connector system in Ethernet networking of audio,
commercial, entertainment, stage production, DMX lighting, industrial and
outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female
receptacles. The cable end offers a robust diecast shell as a carrier for pre-
assembled RJ45 plugs. Female chassis connectors are based on the current
Neutrik "A" series as well the "D" series of XLR receptacles with secure latching
system - a feature not found on other RJ45 receptacles. Termination is offered
in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products
comply with Category 5 shielded or unshielded and are compatible for use with
10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC 110
terminals, "A" style ? Mfg. #NE8FAV-Y110 |
- Accommodates NE8MC* or any standard RJ45 plug
- The adapter offers the approved latch lock system
- The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
| Electrical |
|
| Contact resistance |
< 10 mΩ |
| Dielectric strength |
1 kVdc |
| Frequencyrange |
1 - 100 MHz |
| Insulation resistance |
> 0.5 GΩ |
| Rated current per contact |
1,5 A |
| Rated voltage |
< 50 V |
| Standard compliance |
TIA/EIA 586B, IEC11801 |
| Mechanical |
|
| Insertion force |
≤ 20 N |
| Withdrawal force |
≤ 20 N |
| Lifetime |
> 1000 mating cycles |
| Wiresize |
|
| Locking device |
Latch lock |
| Material |
|
| Contact plating |
0.2 µm Au over Ni plating |
| Contacts |
Bronze (CuSn8) |
| Insert |
PBTP 15 % GR |
| Shell |
AlMgSi 0.5, black plated |
| Strain relief |
CuZn35Pb2, Tin plated |
| Environmental |
|
| Flammability |
UL 94 HB |
| Temperature range |
-30 °C to +80 °C |
| Product |
|
| Title |
NE8FF |
| Connection Type |
Adapter |
| Gender |
female |
| Neutrik introduces BNC 75W cable connectors in push-pull and rear-twist versions.
Featuring a true 75W design that meets the stringent requirements of HDTV/DVD,
these connectors sustain consistent impedance at high frequencies up to 3 GHz,
are easy to handle in high density applications such as video patchbays and switchers,
show excellent return loss and VSWR, consist of machined parts that are precisely
made to our high standards and offer a center pin assembly with a snug fit to provide
tactile indication when the contact is snapped into position.
Push-Pull BNC Cable Connector
* Unique push-pull locking system is ideal for ultra high-density applications, patching, etc.
* Assembly is fast and easy a requires only a standard center contact crimp (.063“/1.60 mm)
after cable prep
* Use of a standard crimp size eliminates the need for different crimp dies and facilitates
field repair
* Innovative screw lock cable retention with the jacket providing superior pull strength
* Standard color is black, optional colored boots available
* For use with cable types: Belden 1694A, Commscope 5765, ELF Inc. Cable, Eupen 705
CRT 5V-HS, Gepco VSD2001, Nokia/Draka 1.0/4.8 AF, Suhner S05133-07, Suhner S05163-02 |
Reviews
There are no reviews yet.