Content | Hi-Fi amplifier with , BLUETOOTH , SD , USB player
RMS Power Output: 35Wrms *2
Frequency Response: +/-3dB , 100Hz-20kHz
Impedance: 4/8/16 Ohm
T.H.D.: <1.0%
S/N Ratio: >90dB, Mic <80dB, Line>80dB
Microphone sensitivity: 10mV
USB/SD Flash Memory Support: Up to 32GB
Digital File-type Playback Support: MP3, WMA, WAV
Power Supply: 115V/230V Switchable
Dimensions (L x W x H): 12.60’’ x 9.84’’ x 3.54’’ –inches |
Technical Specifications
Continuous power output, per channel, 8Ω
- Both channels driven, 8Ω,20Hz-20kHz, 0.2% THD - 200W
- Single, 4Ω, at 1kHz - 400W
Inputs
- Nominal sensitivity for 200W / 8Ω - 1.15V (RCA), 2.3V (XLR)
- Input impedance - 10kΩ
- Frequency response 20Hz-20kHz +/- 0.05dB
- Signal/noise ratio (Awtd) 50W / 8Ω - 110dB
General
- Power consumption (standby) -
|
Class XD™ amplification designed to eliminate crossover distortion at low signal levels New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms. Separate transformer taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers A separate toroidal transformer supplies the preamp making the 851A effectively a Pre and Power amp combination in one box CAP5 protection technology for trouble free operation Acoustically damped full metal chassis with thick brushed aluminium front panel Customisable front panel display Balanced and unbalanced analogue audio inputs for superior connectivity RS232 controllable Eco-friendly Available in black and silver finishes
|
The PM6006 is an upgraded successor of the multi-award-winning PM6005. We've retained the pre-amp and power-amp sections that exclusively feature discrete components - not a single IC in sight of the signal path. The PM6006 is upgraded for peak current at the amplifier stage, which makes it possible to refine the sound for you in much more detail.
Maximum Dimensions (W x D x H) | 17.3 x 14.6 x 4.1 |
|
Overview
Integrated Amplifier with DAC mode
Integrated Amp with USB-DAC for High-res Audio and "Simple & Straight” Engineering Design from High-end Models
- 2 x 160 W (4 ohm) output
- Advanced Ultra High Current (UHC)-MOS Single Push-Pull Circuit Power Amplifier with new Schottky barrier diodes
- DAC Master Clock Design
- USB-B input for High Resolution Audio up to 384 kHz / 32 bit and 11.2 MHz DSD
- Digital isolator to eliminate high-frequency computer noise on the USB-B
- Low noise OLED display for source and sample rate indication
- Analog Mode for pure audio reproduction switching off digital audio circuitry and display
- Advanced AL32 Processing Plus
- Direct Mechanical Ground Construction to minimize unwanted vibration
- Chassis construction with 6 independent blocks to eliminate noises
- Leakage-cancelling-mounted twin transformers
- Main transformer with separate power supplies for analogue and digital circuits
- Wide dynamic range playback, supporting high-resolution audio sources
- High-grade volume control for precise adjustment
- 2 Digital Optical and 2 Digital Coaxial inputs
- High performance MM & MC Phono Equalizer Amp
- Available in Premium Silver
Denon is one of the rare audio brands that continued to actively develop Hi-Fi components and accumulate, refine, and pass down Hi-Fi audio technologies. The 2500NE series, designed for todayʼs age, has been developed by both veteran engineers and talented young engineers who have inherited the Denon technologies and expertise that have been cultivated over many years and decades. And the performance of the PMA-2500NE goes well beyond that of Denonʼs previous PMA-2000 series. With its ultimate built-quality, unique Denon technologies and state-of-the-art connectivity, the PMA-2500NE truly is a masterpiece of sound technology. Thanks to the rear USB-B input and embedded high quality D/A converter, the PMA plays high resolution files up to 384kHz/32bit and DSD up to 11.2MHz from a computer in impeccable sonic quality. For the best performance from analogue inputs, the PMA features an Analog Mode which allows to switch off all unutilized sections like the digital input circuitry or the low noise display for an unaltered audio reproduction.
Channels 2
Digital in: USB-B / optical / coaxial / USB-A / 2 / 2 /
Sample Rate digital In 192 kHz / 24-bit
USB-B DSD Audio Streaming (DoP): DSD2.8 / DSD5.6 |
Enjoy superb sound from your favorite analog and digital sources with the Marantz PM7005 integrated stereo amplifier. Featuring a high current discrete power output stage with current feedback (a Marantz innovation), the PM7005 is also equipped with our exclusive HDAM technology, employing proprietary circuit modules with discrete components that deliver ultra-wideband response and fast slew rate.
The versatile PM7005 features multiple analog and digital inputs, including optical and coaxial digital inputs along with a USB-B 2.0 for direct connection to computer high resolution digital audio sources. Featuring the reference-class CS4398 high resolution D/A converter, the PM7005 can decode high resolution digital audio files up to 24 bits and 192 kHz sampling. It's also compatible with DSD 2.8 MHz and 5.6 MHz high resolution files (the same system found on SACD), and the asynchronous USB-B port also features jitter removal for the most pristine sound quality.
There are multiple analog inputs, including a MM phono input, along with dual recording inputs and outputs, and the Source Direct function bypasses the balance and tone controls for the shortest signal path, while the Analog mode disables the digital circuitry when listening to analog sources.
Maximum Dimensions (W x D x H) | 17.32 x 14.92 x 4.92 in. |
|
Reviews
There are no reviews yet.