The Touch! wireless RGB LED Controller is our most advanced and easiest to use RGB LED controller. With this controller, you can use the touch wireless remote to control your RGB LED fixtures, providing full color and brightness control. Simply connect this unit to your RGB LED fixtures and a power supply, grab the remote […]
The Touch! wireless RGB LED Controller is our most advanced and easiest to use RGB LED controller. With this controller, you can use the touch wireless remote to control your RGB LED fixtures, providing full color and brightness control. Simply connect this unit to your RGB LED fixtures and a power supply, grab the remote control, and start controlling your fixture.
Choose any color output using the touchwheel on the remote control, or choose from 11 pre-programmed scenes.
The RGB Touch Controller is a colour-change control system for LED lighting.
It features the latest in capacitance and wireless touch technology, to ensure an increased lifespan and reliability by eliminating the mechanical wear associated with physical buttons.
The wireless range of the kit is approx 20m and incorporates a new PWM control technology to eliminate the flicker between colour changes.
Many features come as standard including multi-type memory functions for colour, modes, speed and brightness/dimming.
The kit comes boxed and complete with user manual, simple-to-install input/output receiver and capacitive-touch, colour wheel handheld controller.
Technical parameters:
Controller：
Working temperature：-30℃~+60℃
Supply Voltage：DC5V/DC 12V-24V,
Output：3 channels N-MOS Drain open output
Connection mode：common anode
Static power consumption：<0.5W
Output current： 6A*3Ch=18A 6A(Each channel)
controller dimension：：L83 Χ W79 Χ H33 mm
Package size：L205ΧW135ΧH45mm
Net Weight：168g
Gross Weight：392g
Remote Control:
Working temperature：-30℃~+60℃
Power supply mode：2pcs NO.7 Battery
Supply voltage：3V
Static power consumption：<0.09mW
Static current：10uA
Operating current：15mA
Remote-controlled distance：>20M
Stand-by time：6 months
External dimension:
Remote control Function instruction:
changing models are as below:
Connection Instruction:
DC+： For power input +（power supply voltage12v-24v）
DC-： For power input –
V+： For Load Common anode
R/CH1： Load output Red channel
G/CH2： Load output Green channel
B/CH3： Load output Blue channel
Power： Red indicating light is for power light，when the power on it will be turn on.
Receiver： Green indicating light, normally it will be in the state of OFF,it will be twinkle
when received Signal From the remote.When the controller output meets short circuit,the green indicating light will be
twinkle in a Fixed frequency to indicate the user.
Typical Applications:
Notes:
1. The use of power and load voltage, current, power must be consistent with the product.
2. Please make the connection like the diagram above（to connect the load wire first, than to connect with the power），In the process of operation please avoid short circuit.
3. This product warranty is 24 month，But not including the damage by people and other reason caused by over load working.
Weight
0.3 kg
Reviews
There are no reviews yet.
Be the first to review “ARTSOUND WD216RGB Led Touch Controller RGB 216 Watt” Cancel reply
The Touch! wireless RGB LED Controller is our most advanced and easiest to use RGB LED controller. With this controller, you can use the touch wireless remote to control your RGB LED fixtures, providing full color and brightness control. Simply connect this unit to your RGB LED fixtures and a power supply, grab the remote control, and start controlling your fixture.
Choose any color output using the touchwheel on the remote control, or choose from 11 pre-programmed scenes.
The RGB Touch Controller is a colour-change control system for LED lighting.
It features the latest in capacitance and wireless touch technology, to ensure an increased lifespan and reliability by eliminating the mechanical wear associated with physical buttons.
The wireless range of the kit is approx 20m and incorporates a new PWM control technology to eliminate the flicker between colour changes.
Many features come as standard including multi-type memory functions for colour, modes, speed and brightness/dimming.
The kit comes boxed and complete with user manual, simple-to-install input/output receiver and capacitive-touch, colour wheel handheld controller.
Technical parameters:
Controller：
Working temperature：-30℃~+60℃
Supply Voltage：DC5V/DC 12V-24V,
Output：3 channels N-MOS Drain open output
Connection mode：common anode
Static power consumption：<0.5W
Output current： 6A*3Ch=18A 6A(Each channel)
controller dimension：：L83 Χ W79 Χ H33 mm
Package size：L205ΧW135ΧH45mm
Net Weight：168g
Gross Weight：392g
Remote Control:
Working temperature：-30℃~+60℃
Power supply mode：2pcs NO.7 Battery
Supply voltage：3V
Static power consumption：<0.09mW
Static current：10uA
Operating current：15mA
Remote-controlled distance：>20M
Stand-by time：6 months
External dimension:
Remote control Function instruction:
changing models are as below:
Connection Instruction:
DC+： For power input +（power supply voltage12v-24v）
DC-： For power input -
V+： For Load Common anode
R/CH1： Load output Red channel
G/CH2： Load output Green channel
B/CH3： Load output Blue channel
Power： Red indicating light is for power light，when the power on it will be turn on.
Receiver： Green indicating light, normally it will be in the state of OFF,it will be twinkle
when received Signal From the remote.When the controller output meets short circuit,the green indicating light will be
twinkle in a Fixed frequency to indicate the user.
Typical Applications:
Notes:
1. The use of power and load voltage, current, power must be consistent with the product.
2. Please make the connection like the diagram above（to connect the load wire first, than to connect with the power），In the process of operation please avoid short circuit.
3. This product warranty is 24 month，But not including the damage by people and other reason caused by over load working.
Applications: Neccessary conversions of DMX to PWM signals for driving LEDs
Function: Control 3 channel 12VDC LED products or any one RGB LED Light Bar or Strip using DMX console or standalone mode with onboard DIP switches
Operating Voltage: 12~24 Volts DC (use only 12VDC power with 12VDC LEDs)
Connection Mode: Common Anode (+)
Output: Three CMOS output RGB
Maximum Load Current: 8 Amps/channel (12 Amps total)
Output Power: 144 Watts
Overall Size: (L)166 X (W)67 X (H)41 mm
Control Method: DMX512 RJ45 / DMX512 3-pin XLR / Standalone DIP switches
Standalone Modes: 9 total (7 static and 2 dynamic) see desc. below
Operating Temperature: -25~60°C
The Scene Pilot is usable as stand-alone control for scanners, shopping windows, fairs and architectural lighting. First, connect the Scene Pilot to a DMX controller. Now you can download 2 x 9 programs with 48 steps to a max. of 96 DMX addresses. After downloading, all 18 shows can easily be controlled by music or speed.
DMX addresses: max. 96
Programs: 2 x 9 with 48 steps (download)
Controllable: by music or speed
Dimensions: 320 x 120 x 70 mm (LxWxH)
Weight: 0,38 kg
Product Features:
This DMX512 encoder options the advanced micro control unit, It can receive the DMX512 standard digital control signal which is internationally widely used It changes the signal into PWM control signal to actuate the LED lamp It can also connect the DMA digital console to change the light or each dynamic effect In addition, when the decoder is not connected with the DMA console, it can be used as a synchronous controller That is to say you can Synchronously control number of decoders and LED lights
Basic parameters:
Basic parameters
Product Name: DMX512 Decoder
Supply voltage: DC12-24V
Output channels: 3 channels (R, G, B, ) or 4 channels (R, G, B, W )
Output current: Max.8A Per Channel
Output Power 1:12V:<288W, 24V:<576W (3 channels)
Output Power 2:12V:<384W, 24V:<768W (4 channels)
Operating temperature: -20-60C
Controller size: L166*W67*H41(mm)
Box size: L176*W84*H50(mm)
Net weight: 360g
Gross weight: 408g
DMX512 standard: DMX512/1990
Control mode: button control, 512 console control
Accessories: A pair of XLR plugs
Package List:
1 * DMX Decoder
1 * Male and female XLR connectors
1 * User manual
NON Waterproof CCW led strip 240pcs/meter 19,2watt/meter
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.