Content |
Features New (Extended Resolution) long-throw faders for maximum control and resolution, with integrated protective dust cover New Sweepable High Pass filter 20-200Hz Ultra low noise and accurate 'Constant Q' circuitry Balanced Inputs and Outputs on XLR and Jack connectors Switchable 6dB or 15dB cut and boost Audio Ground lift switch on rear Intuitive controls User friendly layout ...and most of all, flawless performance in any audio environment Sometimes a 10 band Graphic Equalizer isn't enough, but a 30 band EQ is overkill. Well, for times like these, we've designed the ARX EQ215. It's a dual channel 15 band Graphic Equalizer built to the same exacting standards as our EQ260, but designed especially for applications where the program material is predominantly pre-recorded and pre-processed. Typical applications are, for example, in DJ systems, Karaoke bars, home theatre, project and budget studio control rooms, and home stereo systems Delivering flawless professional performance, it takes up minimal rack space being neatly housed in a compact 2 RU all steel chassis. Quality you can feel as well as hear On the EQ215 's front panel, each channel has 15 of our new Extended Resolution long throw, centre grounding faders, switchable to either ±15dB or ±6dB, for the ideal combination of high fader resolution and maximum cut and boost. A protective dust cover is also fitted to each fader. As well, there is a Gain recovery control with up to +10 dB of gain; a Clip LED to indicate circuit overload, a sweepable 20-200Hz High Pass filter, and an IN/OUT hardwire bypass switch which removes the EQ215 completely from the signal path. Accurate Constant Q Circuitry Internally, the EQ215 features innovative Constant Q circuitry. What makes this so good? Well, it means that the graphical representation of the sliders on the front panel more accurately reflects the changes you are making to the sound, as compared to the very rough approximation you get with many traditional graphic EQ designs. In other words, 'what you see is what you get.' Combine this with the EQ215 's ultra low noise circuitry, and you have an equalizer that is unsurpassed for total accuracy.Additionally, at the 0dB slider position each filter is, in effect, removed from the circuit to further enhance the EQ215 's low noise figures. Balanced Inputs and Outputs On the rear panel, each channel of the EQ215 has true differential Balanced Inputs and Servo Balanced Outputs, with both XLR as well as convenient TRS balanced jack connectors. There is also an audio ground lift switch to isolate the audio ground from the chassis ground. Universal AC Power AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage switch. When you need superlative, uncompromising audio quality but can't justify the use of a dual 30 band EQ such as the EQ260, we belive the EQ215 is the only graphic equalizer to choose. With its compact High Density design, clean good looks and precision electronics, the ARX EQ215 will truly enhance any pro audio application. You'll never compromise on Quality when you choose ARX
T E C H N I C A L || S P E C I F I C A T I O N S Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 23 dB CMRR >55 dB, 20 Hz to 20 KHz Output Impedance Balanced 300 ohms, Unbalanced 150 ohms Output Level (Max) + 23 dB Frequency Response 10Hz to 20KHz ±0.25dB Signal to Noise ratio -93 dB Unweighted, -98 dB 'A' weighted Distortion .0035% THD, 0dB, @1KHz Dynamic Range 116 dB High Pass Filter Sweepable 20-200Hz Power Requirements 100/120 V AC, 220/240 V AC, 18VA Weight 8lbs/3.75Kg Dimensions19“W x 3½“H x 8“D, 482 x 89 x 205 mm (2 RU) Input Connector type XLR, Balanced Jack Output Connector type XLR, Balanced Jack
Front Panel Controls Each channel has: 15 x 60mm Extended Resolution long throw, centre grounding faders on ISO standard frequencies, 25 Hz to 20 KHz Infinity through to +10dB Gain control LED clipping indicator Sweepable High Pass filter 20-200Hz 15 or 6 dB EQ Cut/Boost range switch Hardwire bypass EQ IN/OUT switch Rear Panel Balanced Inputs and Outputs, on both XLR and TRS jack connectors. Audio Ground Lift switch AC input connector, with voltage switch and fuse. | INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot)
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot)
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 100 ohm, unbalanced 50 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: 50kHz, +0.5/-3dB
Dynamic Range: Typicall >112dB
Signal-to-Noise: Typically >95dB
THD+Noise: |
INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot)
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot)
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 100 ohm, unbalanced 50 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: 50kHz, +0.5/-3dB
Dynamic Range: Typically >112dB
Signal-to-Noise: Typically >95dB
THD+Noise: |
1215 Dual 15-Band Graphic Equalizer
The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
| High-Definition 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System
- Professional 31-band stereo graphic equalizer for live and studio applications
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
- Ultra-low noise 4580 operational amplifiers for highest signal integrity
- Dedicated mono subwoofer output with adjustable crossover frequency
- Additional sweepable high and low-cut filters for each channel remove unwanted frequencies, e.g. floor rumble, hiss etc.
- Highly accurate 12-segment LED input/output metering and input gain controls for easy level setting
- Relay-controlled hard-bypass with an auto-bypass function during power failure (fail-safe relay)
- Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
- “Planet Earth" switching power supply for maximum flexibility (100
- 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- 3-Year Warranty Program*
- Conceived and designed by BEHRINGER Germany
| Digital stereo active crossover with 4 inputs and 8 outputs, incl. software .
- Flexible routing configurations for all standard mono and stereo output operating modes
- 4 analog inputs and 8 analog outputs (XLR)
- Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
- Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presets
- Up to 30 user presets storable in the device via software
- 5 menu languages selectable (German, English, French, Spanish, Dutch)
- Alphanumeric LCD screen with 2 lines of 16 characters each
- Input sensitivity digitally adjustable
- Inputs and outputs with 4-digit LED level meter as well as clip and limit LED indicator
- Mute switch with LED indicator per output
- 7-band parametric EQ per output
- Up to 7 ms signal delay adjustable for the outputs
- Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
- Switchable phase
- Lock function for prevents undesired changes to settings
- Rack installation, 1 U
- Windows XP, Vista, 7, 10 and Mac OS X 10.5.8 and better
- Digital signal processor
- The device can be connected via USB to the PC in connection with DXO Software
The firmware can be updated via the PC connection
- (19") 48.3 cm rack installation 1 U
Power supply: |
100-240 V AC, 50/60 Hz
6 V DC 800 mA |
Power connection: |
Mains input via Coaxial power connector (M) power supply cord with AC adapter (provided) |
Frequency range: |
10 - 22000 Hz |
THD: |
<0,005 % at 1 kHz |
DSP: |
Digital signal processor |
Crossover frequency: |
20-20000 Hz |
Impedance: |
Input 10 kOhm
Output 50 Ohm |
Gain: |
Output: -50 dB to +12 dB |
Filter: |
Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct |
Delay: |
0 - 7 ms |
Dynamic range: |
Input: 114 dB
Output: 110 dB |
Sample rate: |
48 kHz |
Connections: |
Input: line via 4 x 3-pin XLR
Output: line via 8 x 3-pin XLR |
Max. level: |
Input: +22 dBu
Output: +9 dBu |
USB port: |
Typ B |
PC connect: |
DXO Software via USB, firmware can be updated |
Housing design: |
(19") 48.3 cm rack installation 1 U |
Dimensions: |
Width: 48,3 cm
Depth: 22,3 cm
Height: 4,45 cm |
Weight: |
1,90 kg |
|
Reviews
There are no reviews yet.