ASHLY DPX-100 Graphic Equalizer and Compressor-Limiter Mono 7-band

Discontinued

561.26 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The DPX Series was created in response to our dealers, contractors and users requesting a simple solution requiring general EQ and comp/limiting. Two products havebeen developed, the DPX-100 Graphic Equalizer & Compressor/Limiter and DPX-200Parametric Equalizer & Compressor/Limiter.  Using proven circuitry from our popular MQX and PQX series equalizers and combiningthese features with our CLX series […]

 

Read more

The DPX Series was created in response to our dealers, contractors and users requesting a simple solution requiring general EQ and comp/limiting. Two products have
been developed, the DPX-100 Graphic Equalizer & Compressor/Limiter and DPX-200
Parametric Equalizer & Compressor/Limiter.  Using proven circuitry from our popular MQX and PQX series equalizers and combining
these features with our CLX series compressor/limiters provides two tools no audio system
should be without. By combining the features and benefits of two processors into one unit,
the result is two powerful tools providing a simple solution to everyday audio applications.
The EQ section of the DPX-100 is a 15-band, constant Q, 2/3 octave, ISO center, precision
wein bridge filter design. Other EQ features are: frequency range from 25Hz to 16KHz,
selectable 15dB or 6dB range, 25mm faders with ‘center off’ position, EQ in/out switch,
signal present and clip LEDs and switchable 18dB/octave -20Hz high pass filter.   Two separate inputs are available in the DPX-200;  a microphone preamp with input pad
and a line input. An input select switch and input level control are located on the front
panel. The EQ section consists of 4 bands of filtering; two full-bandwidth parametric EQs
as well as a low-shelf and high-shelf filter. Other EQ features are: in/out switching for
each filter, cut and boost of 15dB, signal present and clip LEDs, and master EQ level control.
The compressor/limiter section uses peak detection circuitry and has individual controls
for gain, threshold, ratio, attack, release and output level. More compressor/limiter features
include: in/out switch, 11-stage LED gain reduction meter, selectable 11-stage LED input/output
level meter, and a detector patch point for frequency-selective limiting or ducking.   Additional features of the DPX-100 and DPX-200 are: the equalizer section and
compressor/limiter may be used independently or chained together in series, balanced
XLR and inputs and outputs, extremely low noise and distortion, internal power supply
and Ashly’s five-year worry-free warranty.


Weight 3.60 kg

Reviews

There are no reviews yet.

Be the first to review “ASHLY DPX-100 Graphic Equalizer and Compressor-Limiter Mono 7-band”

Your email address will not be published. Required fields are marked *

Quick Comparison

ASHLY DPX-100 Graphic Equalizer and Compressor-Limiter Mono 7-band removeDBX 2215 Dual 15-Band Graphic Equalizer with Noise Reduction removeBEHRINGER FBQ1502HD ULTRAGRAPH 2X15BAND EQUALIZER w-FBQ removeBEHRINGER FBQ6200HD Ultra-Musical 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System removePHONIC GEQ-3102F 31-band Stereo Graphic Equalizer removeDBX 1231 Dual 31-Band Graphic Equalizer 2x31 remove
NameASHLY DPX-100 Graphic Equalizer and Compressor-Limiter Mono 7-band removeDBX 2215 Dual 15-Band Graphic Equalizer with Noise Reduction removeBEHRINGER FBQ1502HD ULTRAGRAPH 2X15BAND EQUALIZER w-FBQ removeBEHRINGER FBQ6200HD Ultra-Musical 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System removePHONIC GEQ-3102F 31-band Stereo Graphic Equalizer removeDBX 1231 Dual 31-Band Graphic Equalizer 2x31 remove
ImageBEHRINGER FBQ1502HD ULTRAGRAPH 2X15BAND EQUALIZER w-FBQ
SKUDPX 100DBX 2215E008166E008298H07PH00013DBX 1231
Rating
Price 561.26 incl. GR VAT 434.00 incl. GR VAT 129.00 incl. GR VAT 231.00 incl. GR VAT 249.00 incl. GR VAT 455.00 incl. GR VAT
Stock

Out of stock

In stock

Available on backorder

Available on backorder

In stock

Only 1 left in stock (can be backordered)

AvailabilityOut of stockIn stockAvailable on backorderAvailable on backorderIn stockOnly 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content The DPX Series was created in response to our dealers, contractors and users requesting a simple solution requiring general EQ and comp/limiting. Two products have
been developed, the DPX-100 Graphic Equalizer & Compressor/Limiter and DPX-200
Parametric Equalizer & Compressor/Limiter.  Using proven circuitry from our popular MQX and PQX series equalizers and combining
these features with our CLX series compressor/limiters provides two tools no audio system
should be without. By combining the features and benefits of two processors into one unit,
the result is two powerful tools providing a simple solution to everyday audio applications.
The EQ section of the DPX-100 is a 15-band, constant Q, 2/3 octave, ISO center, precision
wein bridge filter design. Other EQ features are: frequency range from 25Hz to 16KHz,
selectable 15dB or 6dB range, 25mm faders with 'center off' position, EQ in/out switch,
signal present and clip LEDs and switchable 18dB/octave -20Hz high pass filter.   Two separate inputs are available in the DPX-200;  a microphone preamp with input pad
and a line input. An input select switch and input level control are located on the front
panel. The EQ section consists of 4 bands of filtering; two full-bandwidth parametric EQs
as well as a low-shelf and high-shelf filter. Other EQ features are: in/out switching for
each filter, cut and boost of 15dB, signal present and clip LEDs, and master EQ level control.
The compressor/limiter section uses peak detection circuitry and has individual controls
for gain, threshold, ratio, attack, release and output level. More compressor/limiter features
include: in/out switch, 11-stage LED gain reduction meter, selectable 11-stage LED input/output
level meter, and a detector patch point for frequency-selective limiting or ducking.   Additional features of the DPX-100 and DPX-200 are: the equalizer section and
compressor/limiter may be used independently or chained together in series, balanced
XLR and inputs and outputs, extremely low noise and distortion, internal power supply
and Ashly's five-year worry-free warranty.



20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. Check out the dbx 20 Series graphic EQs at your pro audio outfitter. You'll see, with the 20 Series EQs you get MORE!!!

SPECIFICATIONS:

 

 INPUT

Connectors:

 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip

Type:

Electronically balanced/unbalanced, RF filtered

Impedance:

Balanced 40k ohm, unbalanced 20k ohm

Max Input Level:

>+21dBu balanced or unbalanced

CMRR:

>40dB, typically >55dB at 1kHz

OUTPUTS

Connectors:

 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip

Type:

Impedance-balanaced/unbalanced, RF filtered

Impedance:

Balanced 200 ohm, unbalanced 100 ohm

Max Output Level:

 >+21dBu balanced/unbalanced into 2k or greater
 >+18dBm balanced/unbalanced (into 600)

SYSTEM PERFORMANCE

Bandwidth:

20Hz to 20kHz, +/-0.5dB

Frequency Response:

50kHz, +0.5/-3dB

Noise Reduction In:

 (+/-6 and +/-15dB range):

Signal-to-Noise:

 >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

Dynamic Range:

 >120dB, unweighted

Noise Reduction Out:

 (+/-6dB range):

Signal-to-Noise:

 >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth

Dynamic Range:

 >112dB, unweighted

Noise Reduction Out:

 (+/-15dB range):

Signal-to-Noise:

 >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

Dynamic Range:

 >108dB, unweighted

THD + Noise:

  • Professional 15-band stereo graphic equalizer for live and studio applications
  • Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
  • Ultra-low noise 4580 operational amplifiers for highest signal integrity
  • Dedicated mono subwoofer output with adjustable crossover frequency
  • Additional low-cut filter removes unwanted frequencies, e.g. floor rumble
  • Highly accurate 4-segment LED output metering and input gain controls for easy level setting
  • Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
  • “Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
  • 3-Year Warranty Program*
  • Designed and engineered in Germany
  • Audiophile 31-band stereo graphic equalizer for live and studio applications
  • Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
  • Ultra-low noise 4580 operational amplifiers for highest signal integrity
  • Dedicated Limiters with gain reduction meters for each channel protect your sound system from overload and distortion
  • Pink noise generator provides test signals to adapt your sound system to any room acoustics
  • Mono subwoofer output with dedicated level control and adjustable crossover frequency
  • Additional sweepable high and low-cut filters for each channel remove unwanted frequencies e.g. floor rumble, hiss etc.
  • Highly accurate 8-segment LED input/output metering and input gain controls for easy level setting
  • Relay-controlled hard bypass with an auto-bypass function during power failure (fail-safe relay)
  • Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
  • “Planet Earth" switching power supply for maximum flexibility (100
    - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving

Phonic's GEQ3102F is the authentic soundman's choice of EQ - a dual channel 31-band equalizer, offering 6 or 12 dB of cut or boost on standard ISO center frequencies between 20 Hz and 20 KHz. The GEQ3102F is 2-rack space units high and accepts both 1/4" TRS phone jacks and XLR connectors, making it ideal for any studio or live venue setup.

  • Sweepable high and low cut filters on each channel to remove unwanted frequencies 
  • Ultra low-noise audio operational amplifiers offer outstanding sound performance 
  • Relay-controlled hard-bypass with an auto-bypass function during power failure 
  • Dedicated subwoofer output with user-adjustable low-pass filter
  • Feedback detection circuitry for indicating critical frequencies
  • Balanced inputs and outputs with 1/4" TRS and XLR connectors

 

1231 Dual 31-Band Graphic Equalizer The dbx? 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1231 provides standard features like dual-channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other insightful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier. The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 3U steel/aluminum chassis. SPECIFICATIONS:
 INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40 kOhm, unbalanced 20 kOhm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 200 ohm, unbalanced 100 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2 kOhm or greater >+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: 50kHz, +0.5/-3dB
+/-15dB range +/-6dB range
Dynamic Range: 109dB 115dB
Signal-to-Noise: 90dB 97dB
THD + Noise:
Weight3.60 kg4.30 kg3.00 kg2.70 kg2.15 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.60 kg
Weight 4.30 kg
Weight 3.00 kg
Weight 2.70 kg
Weight 2.15 kg
Weight 5.00 kg

FREE SHIPPING THROUGHOUT GREECE

for purchases over 99€ and up to 50kg
For remote areas and islands, the shipping expenses are till the first transshipment

Artsound Newsletters

Be the first to get our exclusive offers
© 2024 Artsound and Lights. All rights reserved.
Click outside to hide the comparison bar
Compare