Audien AM-100 Professional Final Power Amplifier 2 x 150Watt RMS

Original price was: €215.75.Current price is: €177.31. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price

Audien’s final PA amplifier in black. Designed for professional use, such as parties, live programs and event coverage. It can be connected wired via RCA and XLR.

Audien’s final PA amplifier in black. Designed for professional use, such as parties, live programs and event coverage. It can be connected wired via RCA and XLR.

 

Read more

Audien AM-100 Professional 2x 150Watt RMS final amplifier at 4 ohm, suitable for mounting on a 19″ RACK with handles for easy transport. The amplifier offers very good sound quality with a power that can reach 150Watt at 4Ω or 100Watt at 8Ω per channel.
With a plethora of input and output options and leds to indicate the intensity of each channel, but also its overdrive. It is ideal for small cafes, restaurants, parties and shops.
It has a signal input on a 1/2 channel via RCA and Nail plugs – JACK 6.3mm.
It has a signal output to the speakers with three options, Speakon plugs, 6.3mm studs or with bare cables for direct connection.
Equipped with a Ground/Lift switch on its back side, it gives us the option to turn off the noises that come through the grounding of our network. It has a sturdy aluminum heatsink to avoid high temperatures during operation.

       Technical specifications:

  • Class: A/B
  • Power: 2x150Watt RMS 4Ω
  • 2x100Watt RMS 8Ω
  • Frequency range: 10Hz -50KHz
  • Inputs: via RCA & 6.35mm Jack (Nails)
  • Outputs: via Speakon, XLR And Bare Cable
  • Impedance: 4 or 8 Ohm
  • LED vumeter for each channel to indicate the volume
  • Input Sensitivity: 0.77V/26dB/1.4V
  • Toroid Transformer
  • Dimensions: 482*295*88mm
Weight 6.70 kg

Reviews

There are no reviews yet.

Be the first to review “Audien AM-100 Professional Final Power Amplifier 2 x 150Watt RMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audien AM-100 Professional Final Power Amplifier 2 x 150Watt RMS removeCROWN DSI-1000 2x500W-4Ω POWER AMPLIFIER removeFOSTEX RM-2 Amplifier d-class (10W x 2) removeAMERICAN AUDIO VLP-300 Power Amplifier 2x150 Watts removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω removeINTERM R-500 PLUS AMPLIFIER 2X250W remove
NameAudien AM-100 Professional Final Power Amplifier 2 x 150Watt RMS removeCROWN DSI-1000 2x500W-4Ω POWER AMPLIFIER removeFOSTEX RM-2 Amplifier d-class (10W x 2) removeAMERICAN AUDIO VLP-300 Power Amplifier 2x150 Watts removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω removeINTERM R-500 PLUS AMPLIFIER 2X250W remove
ImageAudien ΑΜ-100
SKUAM100DSI-1000RM 2E004734E009302R-500 PLUS
Rating
Price Original price was: €215.75.Current price is: €177.31. incl. GR VAT Original price was: €967.20.Current price is: €824.00. incl. GR VAT Original price was: €806.77.Current price is: €435.00. incl. GR VAT Original price was: €400.00.Current price is: €389.00. incl. GR VAT Original price was: €832.00.Current price is: €754.00. incl. GR VAT Original price was: €845.50.Current price is: €761.00. incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionAudien's final PA amplifier in black. Designed for professional use, such as parties, live programs and event coverage. It can be connected wired via RCA and XLR.
Content
Audien AM-100 Professional 2x 150Watt RMS final amplifier at 4 ohm, suitable for mounting on a 19" RACK with handles for easy transport. The amplifier offers very good sound quality with a power that can reach 150Watt at 4Ω or 100Watt at 8Ω per channel.
With a plethora of input and output options and leds to indicate the intensity of each channel, but also its overdrive. It is ideal for small cafes, restaurants, parties and shops.
It has a signal input on a 1/2 channel via RCA and Nail plugs - JACK 6.3mm.
It has a signal output to the speakers with three options, Speakon plugs, 6.3mm studs or with bare cables for direct connection.
Equipped with a Ground/Lift switch on its back side, it gives us the option to turn off the noises that come through the grounding of our network. It has a sturdy aluminum heatsink to avoid high temperatures during operation.

       Technical specifications:

  • Class: A/B
  • Power: 2x150Watt RMS 4Ω
  • 2x100Watt RMS 8Ω
  • Frequency range: 10Hz -50KHz
  • Inputs: via RCA & 6.35mm Jack (Nails)
  • Outputs: via Speakon, XLR And Bare Cable
  • Impedance: 4 or 8 Ohm
  • LED vumeter for each channel to indicate the volume
  • Input Sensitivity: 0.77V/26dB/1.4V
  • Toroid Transformer
  • Dimensions: 482*295*88mm

Engineered from the ground up for unmatched quality and performance,
the Crown? DSi Series of power amplifiers offers three models of 500W,
800W, and 1200W per channel at 4 ohms. Onboard digital signal processing
includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15
connector provides easy input/output connectivity between DSi amplifiers
and the new DSi-8M System Monitor.
The intuitive front panel LCD screen guides installers through a setup process?
featuring presets for the industry-standard JBL cinema loudspeaker systems?
to make configuration quick and easy.
At the touch of a button, Crown?s DSi cinema amplifiers deliver perfectly matched
performance with each award-winning JBL ScreenArray? system, making this the
ultimate cinema solution.

Features :
Includes three models of 500W, 800W, and 1200W per channel at 4 ohms
Automatic presets for popular JBL cinema speaker systems for quick, easy
configuration
Intuitive front-panel LCD screen guides installers through setup
Onboard digital signal processing includes crossovers, EQ filters, delay, and
output limiting
Computer connectivity via USB allows fast setup and configuration with HiQnet?
System Architect? software
Rear-panel HD-15 connector provides easy input/output connectivity between DSi
amplifiers and new DSi-8M System Monitor
Switch-mode universal power supply
All products fill 2U rack spaces and weigh under 19 pounds
Barrier strip outputs, removable Phoenix-style input
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment
and guarantees its specifications

The Crown? DSi 1000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply. A rear-panel HD-15 connector shall
provide input/output connectivity between the DSi amplifi er and the DSi-8M
System Monitor.
The outputs shall be usable as stereo or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, fl ashes when a very low-level
signal is present at input.
?10 Indicator: Green LED flashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED flashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp/Fault Indicator: Red LED, one per channel, illuminates under Fault or
excessive temperature conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker.
HiQnet USB Connector: Type B, connects to a HiQnet network.
HD-15 Connector: For cinema I/O compatibility with DSi-8M System Monitor.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Stereo (per channel): 700W with 1% THD, 4 ohm Stereo
(per channel): 500W with 0.5% THD, 8 ohm Stereo (per channel) 275W with
0.5% THD, 4 ohm Bridge-Mono: 1,400W with 1% THD, 8 ohm Bridge-Mono:
1,000W with 0.5% THD.
Voltage Gain at 1kHz, 8 ohm rated output: 26 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity at 8 ohm rated output: 2.35V.
Sensitivity at 4 ohm rated output: 2.24V.
Sensitivity at 2 ohm rated output: 1.88V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 105 dB
(A weighted).
Damping Factor: Better than 500 from 20 Hz to 500 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 6.5A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
EQ: 6 parametric fi lters per channel with adjustable Q, boost/cut ±15 dB. Also
adjustable high and low shelving fi lters.
Filters: Highpass and lowpass per channel. Butterworth 12/18 dB per octave
and Linkwitz-Riley 24 dB per octave. High and low shelving fi lters, one per
channel.
Delay: Up to 50 msec total delay per channel.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Presets: 5 user-defi nable loudspeaker presets and 15 factory-default JBL
system presets.
Protection shall include the following:
DSi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airfl ow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg)

  • Rack mount stereo powered monitor speaker system
  • New AES/EBU digital input
  • lndependent MUTE function
  • Sophisticated control panel section
  • Ideal where space is at a premium
RM-2 is the ideal solution for monitoring needs in various space-challenged environments such as machine rooms, VTR monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring is needed and the room for installation is not enough. Adding these new feature sets, RM-2 is now more versatile to various applications.
  • Stereo analog balanced +4DBu inputs with combo connectors (XLR & 1/4" plug).
  • AES/EBU digital input with XLR connector working with fs 44.1kHz to 96kHz.
  • Sophisticated control panel section including 26-dot stereo LED meter, biaxial stereo gain control, phone jack, Channel select switch as well as Input select switch.
  • Independent MUTE function by holding down CH SEL key for a while.
  • Auto Mute when powering on*.
  • D-class power amplifier (10W x 2) for clear sound reproduction and light weight construction.
  • Multi-voltage power supply.

Speaker Section

  • Unit: 110 x 40mm cone type, magnetically shielded, x 2
  • Impedance: 8 ohms
  • Output SPL: 84 dB/W (1m)
  • Frequency response: 200Hz to 20kHz

Amplifier Section

  • Rated output power: 10W or more (8 ohms, 1kHz)
  • Residual noise: -60 dBV or less (DIN AUDIO)
  • Distortion: 0.5% or less (10W / 4 ohms, 1kHz)

Digital input

  • Connector: XLR-3-31 type
  • Digital input Format: IEC60958 (AES/EBU)
  • Digital inputSampling frequency: 44.1kHz to 96 kHz

Analog input

  • Connector: XLR / 1/4" combi-jack
  • Analog input Nominal input level +4dBu (XLR), -10 DdBV (1/4“)
  • Analog input Input impedance 10k ohms or more

Phones

  • Connector: 1/4" stereo jack
  • Applicable load imp. 8 ohms or more
  • Rated output power 20mW + 20mW (32 ohms, 1kHz)

General

  • External dimensions: 430(W) x 44(H) x 282(D) mm
  • Weight: Approx. 3.5kg
  • Power requirement: 100 - 240V~, 50/60Hz
  • Power consumption: 10W

VLP Series Power Amplifier


Output Power:
- 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
- 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
(Bridge Mode, Mono)
- 300W RMS @ 8 Ohms, 1K Hz, 1% THD

Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)

Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz

Slew Rate: 15V Per usec

Damping Factor @ 8 Ohm: 260

Impedance: 20 Ohms balanced / 10 Ohms unbalanced

Cooling System: 2 indivdual fans

Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift

Dimensions (LxWxH): 13.25" x 19" x 1.75" / 336 x 482 x 44mm (1-rack mount space)

Weight: 24 lbs. / 11Kgs.

Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift


Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

acrobat_reader_logo.

Weight6.70 kg10.00 kg3.50 kg11.00 kg12.60 kg10.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.70 kg
Weight 10.00 kg
Weight 3.50 kg
Weight 11.00 kg
Weight 12.60 kg
Weight 10.40 kg