Audien AM-300 Professional Final Power Amplifier 2 x 450Watt RMS

Original price was: €310.00.Current price is: €260.39. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
  • Class: A/B
  • Power: 2x450Watt RMS / 4Ω
  • 2x300Watt RMS / 8Ω
  • Frequency range: 10Hz -50KHz
  • Inputs: via RCA & 6.35mm Jack (Nails)
  • Outputs: via Speakon, XLR And Bare Cable
  • Impedance: 4 or 8 Ohm
  • LED vumeter for each channel to indicate the volume
  • Input Sensitivity: 0.77V/26dB/1.4V
  • Toroid Transformer
  • Dimensions: 482*295*88mm

 

  • Class: A/B
  • Power: 2x450Watt RMS / 4Ω
  • 2x300Watt RMS / 8Ω
  • Frequency range: 10Hz -50KHz
  • Inputs: via RCA & 6.35mm Jack (Nails)
  • Outputs: via Speakon, XLR And Bare Cable
  • Impedance: 4 or 8 Ohm
  • LED vumeter for each channel to indicate the volume
  • Input Sensitivity: 0.77V/26dB/1.4V
  • Toroid Transformer
  • Dimensions: 482*295*88mm

 

 

Read more

Audien AM-300 Professional 2x 450Watt RMS final amplifier at 4 ohm, suitable for mounting on a 19″ RACK with handles for easy transport. The amplifier offers very good sound quality with a power that can reach 450Watt at 4Ω or 300Watt at 8Ω per channel.
With a plethora of input and output options and leds to indicate the intensity of each channel, but also its overdrive. It is ideal for cafes, restaurants, parties’s and shops.
It has a signal input on a 1/2 channel via RCA and Nail plugs – JACK 6.3mm.
It has a signal output to the speakers with three options, Speakon plugs, 6.3mm studs or with bare cables for direct connection.
Equipped with a Ground/Lift switch on its back side, it gives us the option to turn off the noises that come through the grounding of our network. It has a sturdy aluminum heatsink to avoid high temperatures during operation.
The Audien AM-300 is a professional amplifier proposal, with stable operation .
Weight 6.70 kg

Reviews

There are no reviews yet.

Be the first to review “Audien AM-300 Professional Final Power Amplifier 2 x 450Watt RMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audien AM-300 Professional Final Power Amplifier 2 x 450Watt RMS removePHONIC MAX-2500 PLUS Power Amplifier 2x750W removeINTERM L-1800 AMPLIFIER 2X600W removeCROWN XTi-2002 2x800W 4Ω POWER AMPLIFIER removeCrown DSI-2000 2x800W-4Ω Power Amplifier removeINTERM L-2400 AMPLIFIER 2X750W remove
NameAudien AM-300 Professional Final Power Amplifier 2 x 450Watt RMS removePHONIC MAX-2500 PLUS Power Amplifier 2x750W removeINTERM L-1800 AMPLIFIER 2X600W removeCROWN XTi-2002 2x800W 4Ω POWER AMPLIFIER removeCrown DSI-2000 2x800W-4Ω Power Amplifier removeINTERM L-2400 AMPLIFIER 2X750W remove
ImageAudien ΑΜ-300
SKUAM300H06PH00017L-1800XTi-2002DSI-2000L-2400
Rating
Price Original price was: €310.00.Current price is: €260.39. incl. GR VAT Original price was: €499.00.Current price is: €449.00. incl. GR VAT Original price was: €1,317.75.Current price is: €1,186.00. incl. GR VAT Original price was: €962.87.Current price is: €777.00. incl. GR VAT Original price was: €1,364.00.Current price is: €1,161.00. incl. GR VAT Original price was: €1,330.29.Current price is: €1,198.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Class: A/B
  • Power: 2x450Watt RMS / 4Ω
  • 2x300Watt RMS / 8Ω
  • Frequency range: 10Hz -50KHz
  • Inputs: via RCA & 6.35mm Jack (Nails)
  • Outputs: via Speakon, XLR And Bare Cable
  • Impedance: 4 or 8 Ohm
  • LED vumeter for each channel to indicate the volume
  • Input Sensitivity: 0.77V/26dB/1.4V
  • Toroid Transformer
  • Dimensions: 482*295*88mm
 
Content
Audien AM-300 Professional 2x 450Watt RMS final amplifier at 4 ohm, suitable for mounting on a 19" RACK with handles for easy transport. The amplifier offers very good sound quality with a power that can reach 450Watt at 4Ω or 300Watt at 8Ω per channel.
With a plethora of input and output options and leds to indicate the intensity of each channel, but also its overdrive. It is ideal for cafes, restaurants, parties's and shops.
It has a signal input on a 1/2 channel via RCA and Nail plugs - JACK 6.3mm.
It has a signal output to the speakers with three options, Speakon plugs, 6.3mm studs or with bare cables for direct connection.
Equipped with a Ground/Lift switch on its back side, it gives us the option to turn off the noises that come through the grounding of our network. It has a sturdy aluminum heatsink to avoid high temperatures during operation.
The Audien AM-300 is a professional amplifier proposal, with stable operation .
Phonic\'s MAX 2500 Power Amplifier provides 1500 Watts of power at 8 ohms (bridge mono) or 750 Watts at 4 ohms (stereo)- ideal for medium to large-size clubs, churches, auditoriums and more. Input to the MAX 2500 amp is achieved via combo connectors that accept both XLR and 1/4\' jacks, and output is achieved through either Speakon?-type connectors or binding posts. The MAX 2500 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.
  • Output power: 750W @ 4 Ohms stereo, 500W @ 8 Ohms stereo
  • High-current toroidal transformers for greater power and low noise
  • Independent user-defeatable peak limiters reduce distortion
  • Selectable High-Pass filter at 30Hz or 50Hz
  • XLR and 1/4\' TRS input jacks
  • Binding post and Speakon?-type outputs
  • Front mounted gain controls for easy access
  • Signal and Peak LED indicators to monitor performance
  • Short circuit, thermal, subsonic, RF protection, output DC offset
  • Power on/off muting
L1800 600W-600W 4ohm (360W-360W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.Crown XTi2002 Specifications: * Output Power 2 ohms Stereo (per ch): 1000W * Output Power 4 ohms Stereo (per ch): 800W * Output Power 8 ohms Stereo (per ch): 475W * Output Power 8 ohms Bridged-Mono: 1600W * Output Power 4 ohms Bridged-Mono: 2000W * Sensitivity (for full rated power at 4 ohms): 1.4 Vrms * Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB * Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) * Total Harmonic Distortion (THD): * Damping Factor 20 Hz to 1 kHz: > 500 * Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db * Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced * Maximum Input Signal: +22 dBu typical * Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing) * Level Control: Two front-panel rotary level controls, one for each channel * Power Switch Control: On/Off switch applies AC power to the amplifier * Sel/Prev/Next Buttons Controls: Three buttons near the LCD screen that are used to access menu items and front panel lockout * LCD Screen: Backlit liquid crystal display that shows preset and processing status * Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). * –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip. * –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip. * Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio. * Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion * Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions * Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power * Input Connectors: XLR, one per channel * Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel. * Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors). * HiQnet™ USB Connector: Type B, connects to HiQnet™ network. * Chassis: Steel * Front Panel: Cast-aluminum * Cooling: Proportional speed fan with front-to-rear airflow. * Dimensions: 19" (W) x 3.5" (H) x 12.25" (D) * Net Weight: 18.5 lbs (8.4kg) * Shipping Weight: 21.5 lbs (9.8kg)

Crown DSi 2000 2x800W-4Ω Power Amplifier

The Crown? DSi 2000 power amplifier shall be a solid-state two-channel model with a switch-mode universal power supply. A rear-panel HD-15 connector shall provide input/output connectivity between the DSi amplifier and the DSi-8M System Monitor.

The outputs shall be usable as stereo or bridged-mono modes of operation.

The bridged-mono mode shall bridge the outputs to provide increased output voltage.

Front panel controls and indicators shall include the following:

Level: Detented rotary level control, one per channel.

Power Switch: On/off switch applies AC power to the amplifi er.

Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to access menu items and front panel lockout.

LCD Screen: Backlit liquid crystal display shows speaker presets and signal processing.

Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input.

?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below clip.

?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB below clip.

Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.

Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion.

Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions.

Power Indicator: Blue LED illuminates when the amplifi er has been turned on and has power.

Rear panel controls and connectors shall include the following:

AC Line Connector: NEMA 5-15P (15A).

Input Connector: Two 3-pin removable Phoenix-type connectors each accept a balanced line-level input signal.

Output Connectors: 4-position barrier strip with connectors for dual louspeakers or bridge-mono loudspeaker.

HiQnet USB Connector: Type B, connects to a HiQnet network.

HD-15 Connector: For cinema I/O compatibility with DSi-8M System Monitor.

The amplifier shall have the following specifications:

Output Power: 2 ohm Stereo (per channel): 1,000W with 1% THD, 4 ohm

Stereo (per channel): 800W with 0.5% THD, 8 ohm Stereo (per channel) 475W

with 0.5% THD, 4 ohm Bridge-Mono: 2,000W with 1% THD, 8 ohm Bridge-

Mono: 1,600W with 0.5% THD.

Voltage Gain at 1kHz, 8 ohm rated output: 26 dB.

Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.

Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo

mode, 4 to 16 ohms in Bridge-Mono mode.

Sensitivity at 8 ohm rated output: 3.09V.

Sensitivity at 4 ohm rated output: 2.84V.

Sensitivity at 2 ohm rated output: 2.24V.

Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 105 dB

(A weighted).

Damping Factor: Better than 500 from 20 Hz to 500 Hz.

Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.

Input Stage: Input is electronically balanced and employs precision 1% resistors.

Input Impedance (nominal): 20 k ohms, balanced;10 k ohms,unbalanced.

Maximum Input Signal: +22 dBu typical.

L2400 750W-750W 4ohm (500W-500W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.
Weight6.70 kg18.00 kg15.60 kg9.80 kg9.00 kg15.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.70 kg
Weight 18.00 kg
Weight 15.60 kg
Weight 9.80 kg
Weight 9.00 kg
Weight 15.60 kg