AUDIEN BT-40E Column Speaker 40W 100V WHITE

66.98 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
91dB Φ131mm x 4 70-100V

 

Read more

  • 91dB
  • Φ131mm x 4
  • 70-100V
Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIEN BT-40E Column Speaker 40W 100V WHITE”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIEN BT-40E Column Speaker 40W 100V WHITE removeJBL CONTROL 28T-60-WH 8 inch, 2-way System with 70V/100V Transformer removeDAP AUDIO D6322 PST-215 Bi Direction Projector Speaker 15W incl.100V Line Transformer removeTOA BS-633A Wall mount speaker removeJBL CONTROL 25AV - 5.25'' 2-way Monitor Speaker 120W (Black) removeTOA F-2000WTWP Wide-dispersion Speaker System 60W/100V remove
NameAUDIEN BT-40E Column Speaker 40W 100V WHITE removeJBL CONTROL 28T-60-WH 8 inch, 2-way System with 70V/100V Transformer removeDAP AUDIO D6322 PST-215 Bi Direction Projector Speaker 15W incl.100V Line Transformer removeTOA BS-633A Wall mount speaker removeJBL CONTROL 25AV - 5.25'' 2-way Monitor Speaker 120W (Black) removeTOA F-2000WTWP Wide-dispersion Speaker System 60W/100V remove
Image
SKUBT-40ECONTROL 28T-60-WHD6322BS-633ACONTROL 25AVF-2000WTWP
Rating
Price66.98 incl. GR VAT 313.00 incl. GR VAT 64.45 incl. GR VAT 24.73 incl. GR VAT 274.99 incl. GR VAT 325.00 incl. GR VAT
Stock

Available on backorder

In stock

Only 2 left in stock

Available on backorder

In stock

Available on backorder

AvailabilityAvailable on backorderIn stockOnly 2 left in stockAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • 91dB
  • Φ131mm x 4
  • 70-100V
  • 55 Hz to 15 kHz frequency range (-10 dB)
  • 175 watts continuous program power capacity
  • 60W, 30W, 15W, 7.5W taps at 70V
  • 60W, 30W, 15W taps at 100V
  • 2.8 kHz crossover frequency
  • High-Impact Polystyrene (HIPS) enclosure
  • Spring-loaded input terminals
  • Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
  • Net Weight: 6.3 kg (14 lb)

100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.

 

Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin

 

The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.

SPECIFICATIONS
BS-633A  
Rated Input: 6W (100V line), 3W (70V line)
Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W)
Sensitivity (1W, 1m): 91dB
Frequency Response: 120 – 15,000Hz (–20dB)
Speaker Component: 5" (12cm) cone-type
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)
Operating Temperature: –10°C to 50°C (14°F to 122°F)
Finish: Case: ABS resin, off-white
Rear bord: Hard board
Dimensions: 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“)
Wall Mounting Case front mount: 184mm (7.24“)
Dimensions: Fixing hole mount: 120mm (4.72“)
Weight: 780g (1.72 lb)
Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16(0.16" x 0.63“)) × 2

 

PRICE IS PER PIECE AND NOT PER PAIR

  • 70 Hz to 23 kHz frequency range (-10 dB)
  • 200 watts continuous program power capacity
  • 87 dB sensitivity (1W/1m)
  • 100° x 100° nominal dispersion
  • 60W, 30W, 15W, 7.5W taps at 70V
  • 60W, 30W, 15W taps at 100V
  • 8 ohms bypass
  • 3 kHz crossover frequency
  • High-Impact Polystyrene (HIPS) enclosure
  • Video shielded for use near video monitors
  • Stainless steel grille for harsh environments
  • Zinc-plated screw down input terminal strip
  • Available in black or white (Control 25AV-WH)
  • Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
  • Net Weight:  4.0 kg (9 lb)

The F-2000 Series Speaker are compact two-way speaker systems designed for high efficiency, wide range, and high power input handling capability. These speaker systems can be installed in a manner ideal for the location and intended application. The F-2000WTWP features a water-proof design (splash-proof type meeting IPX4 standard), so that it can be permanently installed outdoors.

Specification
Enclosure Bass-reflex type
Rated Input 60 W
Rated Impedance 100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 3.3 kΩ (3 W)
70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 3.3 kΩ (1.5 W)
Sensitivity 92 dB (1 W, 1 m) at installation in 1/2 free sound field
93 dB (1 W, 1 m) at installation in 1/2 free sound field (with horn adapter)
Frequency Response 65 - 20,000 Hz, -10 dB at installation in 1/2 free sound field
Crossover Frequency 2.5 kHz
Directivity Angle Horizontal: 110゜, Vertical: 100゜ Horizontal: 80゜, Vertical: 80゜ (with horn adapter)
Speaker Component Low frequency: 20 cm (8) cone-type High frequency: 25 mm (1“) dome tweeter“
Input Terminal Push-in terminal
Water Protection IPX4
Operating Temperature -10℃ to +50℃ (14゜F to 122゜F)
Finish Enclosure: HIPS, white
Punched net: Surface-treated steel plate, white, anticorrosive paint
Joint bracket, wall bracket: Stainless steel (SUS304), t2.0
Speaker bracket: Die-cast aluminum, white, paint
Dimensions 244 (W) × 373 (H) × 235 (D) mm (9.61 × 14.69" × 9.25“)“
Weight 7.4 kg (16.31 lb) (including the supplied brackets)
Accessory Speaker bracket …1, Joint bracket …1, Wall bracket …1, Bracket fixing screw … 1 set,
Horn adapter …1, Horn adapter mounting screw …4, Terminal cover …1,
Terminal cover mounting screw …4
Option Speaker mount bracket: SP-131, YS-60B

 

Weight3.00 kg6.30 kg1.00 kg0.78 kg4.00 kg7.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 6.30 kg
Weight 1.00 kg
Weight 0.78 kg
Weight 4.00 kg
Weight 7.40 kg