AUDIEN BT-508W PASSIVE SPEAKER 5″ 35Wrms 8Ω White (PAIR)

Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.

Features:

• Frequency Response: 38 Hz - 20 kHz
• 100W continuous program (50W cont. pink, 200W cont.peak)
• 88 dB sensitivity (1W/1m)
• High-slope crossover network produces natural sound and even coverage.
• Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.

• 85 Hz to 22 kHz frequency range (-10 dB)
• 50 watts continuous program power capacity
• 86 dB sensitivity (1W/1m)
• 8 ohms nominal impedance
• 3.5 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Spring-loaded input terminals
• Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
• Net Weight: 1.8 kg (4 lb)

Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility

Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)

The DYNACORD VL262W 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL262 is ideally suited to be used in most demanding applications. The VL262W is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two ultra-low distortion DND 6130-16 Neodymium transducers are used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Cabinet Full-Range Configuration passive 2-Way Nominal Impedance 8 ohms Rated Power RMS 300 watts Program Power 600 watts Peak Power 1200 watts SPL 2,83 V/1m 97 dB max. SPL 1m (calc. with Peak) 125 dB Freq. Range (-10 dB) 90Hz - 20Hz Coverage Angle nom. 90° x 40° Passive X-Over Frequency 2,2 kHz VCT Protections Halogen Components HIGH Ev DH 3 Order-# D353078 Components LOW 2x DND 6130-16 Order-# D366420 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensions (WxHxD) mm 217x 543x 230 Net Weight 10 kg Enclosure Material Birch Plywood

maximum sound-level pressure of 108 dB. The LD SAT242G2 is rated for 100 W continuous power can can be used alone as a full-range speaker or with a subwoofer in the in the LD installation series for bass expansion.