AUDIEN BT-508W PASSIVE SPEAKER 5″ 35Wrms 8Ω White (PAIR)

The SR-H3L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

Specification  Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W
Rated Impedance 8 Ω
Sensitivity 95 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response 110 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜
Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1186.4 (H) × 115 (D) mm (3.31" × 46.71" × 4.53“)
Weight 7.6 kg (16.75 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206

The AC16 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive.  The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting.  The high frequency device is a 1" exit compression driver integrated into a 90° x 90° PT™ (Progressive Transition) waveguide that provides even coverage throughout the intended listening area.  The AC16 utilizes a 6.5" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 2" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket.  The AC16 is also equipped with attachment
points located on the bottom of the enclosure for a stand mount accessory.  The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.

Features:
1" Exit Compression Driver with 90° x 90° Coverage PT™waveguide.
6.5" (165 mm) LF transducer
Ultra compact enclosure
400W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third-party OmniMount® typebracket and stand mount accessory.
Specifications:

Frequency Range (-10 dB): 55 Hz -20 kHz
Frequency Response (±3 dB): 65 Hz -18 kHz
Power Rating:
200W Cont. Pink Noise
400W Program
800W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 15" H x 7.8" W x 8.9" D (381 x 199.4 x 226.1mm)
Weight: 15.8 lbs. (7.2 kg)

maximum sound-level pressure of 108 dB. The LD SAT242G2 is rated for 100 W continuous power can can be used alone as a full-range speaker or with a subwoofer in the in the LD installation series for bass expansion.

The AC15 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive.  The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting.  The high frequency device is a 1" dome tweeter integrated
into a 90° x 90° waveguide that provides even coverage throughout the intended usage area.  The AC15 utilizes a 5.25" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 1.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket.  The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.

Features:
1" Dome Tweeter with 90° x 90° Coverage.
5.25" (135 mm) LF transducer
Ultra compact enclosure
300W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket

Specifications:
Frequency Range (-10 dB): 80 Hz -20 kHz
Frequency Response (±3 dB): 90 Hz -18 kHz
Power Rating:
150W Cont. Pink Noise
300W Program
600W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 9.5" H x 5.9" W x 7" D (241.3 x150.3 x 177.8mm)
Weight: 10.5 lbs. (4.7 kg)

PRICE IS PER PIECE AND NOT PER PAIR

• 70 Hz to 23 kHz frequency range (-10 dB)
• 200 watts continuous program power capacity
• 87 dB sensitivity (1W/1m)
• 100° x 100° nominal dispersion
• 60W, 30W, 15W, 7.5W taps at 70V
• 60W, 30W, 15W taps at 100V
• 8 ohms bypass
• 3 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Video shielded for use near video monitors
• Stainless steel grille for harsh environments
• Zinc-plated screw down input terminal strip
• Available in black or white (Control 25AV-WH)
• Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
• Net Weight:  4.0 kg (9 lb)