Description | Built-in Mp3/USB/SD player
siren , FM receiver & remote control
Input 2xMIC & 1xAUX
Power supply 220VAC & 12VDC
Frequency response 20HZ-20KHZ
Sensitivity :<75dB;
Mic control & aux volume.
Mic input unbalanced
Output Impedance/Line: 4-16Ω
Output power:18W | The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end and the amplifiers in-between. | HI-FI ENHANCER, FM 87.5MHz-108MHz, 180W+180W | 3000W Two-Channel Amplifier with Precise Power Management | Very high power and channel density – The four-channel FP10000Q delivers a total of 10000 W (4 x 2500 W @ 2 ohms) in only 2U. Four-channel flexibility – Adjacent channels bridgeable for 2- or 3-channel operation. Lab.gruppen sound quality – impeccable sonic performance standards with durability and greater efficiency. NomadLink® network ready – Monitoring and control of key functions accessible via the intuitive DeviceControl software. Patented Class TD amplifier topology – Road-proven output stage delivers Class B audio quality with Class D efficiency. Regulated Switch Mode Power Supply (R.SMPS) – Output power remains constant even with significant drops in the mains voltage. Efficient cooling system - Unique, lightweight Intercoller copper cooling system dissipates more heat to allow extended peak output. Adjustable parameters - Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom configuration for any application. Comprehensive protection and warning – Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start. XLR input connectors. Heavy-duty binding post or Speakon output connectors |
- Class: A/B
- Power: 2x 225Watt RMS / 4Ω
- 2x 150Watt RMS / 8Ω
- Frequency range: 10Hz -50KHz
- Inputs: via RCA & 6.3mm Jack (Nails)
- Outputs: via Speakon, XLR And Bare Cable
- Impedance: 4 or 8 Ohm
- LED vumeter for each channel to indicate the volume
- Input Sensitivity: 0.77V/26dB/1.4V
- Toroid Transformer
- Dimensions: 482*295*88mm
|
Content | Audien SM-201B microphone amplifier with 2 microphone inputs and 1 AUX input as well as built-in MP3/USB/SD Player, siren and FM receiver. With a power of 18Watt RMS load capacity from 4 to 16 Ohm and the ability to operate with the car battery (12VDC) or as a fixed with network voltage (220VAC).
Suitable for announcements with vehicle or mobile sales units, vendors, sellers of popular markets, announcements of events and events, etc.
Built-in Mp3/USB/SD player
siren , FM receiver & remote control
Input 2xMIC & 1xAUX
Power supply 220VAC & 12VDC
Frequency response 20HZ-20KHZ
Sensitivity :<75dB;
Mic control & aux volume.
Mic input unbalanced
Output Impedance/Line: 4-16Ω
Output power:18W
|
Manufacturer |
POWERSOFT |
Warranty |
4 Years Gurantee |
Channels |
Four Channel |
Resistance ohms |
8Ω / 4Ω / 2Ω |
DSP |
Yes |
Power (8 ohms/Watt RMS) per channel |
750 |
Power (4 ohms/Watt RMS) per channel |
750 |
Power (2 ohms/Watt RMS) per channel |
750 |
Weight (kg) |
7.1 |
| Features:
Exquisite construction, luxurious texture, exuding an intense elegant artistic atmosphere, high-tech atmosphere, built-in Bluetooth / AUX / USB / SD / FM audio input interface, the Bluetooth name is BLUEBOOTH, with volume control
The vocal performance of this small power amplifier is clear, round, harmonious and natural, and the tone is very expressive. Small differences between tones can also be clearly distinguished
For light music and modern music, it has the characteristics of high sensitivity, low distortion, large dynamic sound field and smooth sound quality. It has a good interpretation of the sense of space and depth and has a good reduction of symphonic sound, so that your bass is loud, the middle frequency is full and the treble is clear
Whether it's symphonic or pastoral music, it can be expressed with a touch of excitement. Great in any office, study or even a reception area
The panel has independent treble and bass control and the sound quality is under your control. Multi-function playback, music as you want, the product should be paired with passive speakers. With 3.5 signal input interface, it can easily connect to all audio sources such as mobile phones, computers, MP3 etc.
It can also connect directly to CD player or mobile phone with RCA audio cable, which is very suitable for home, party, party and other scenes; can achieve flexibility and ease of use and enjoy high quality music as you want
Specification:
FM 87.5MHz-108MHz
Color: Blue
Material: Metal + Electronic Components
Input Resistance: 4-16 Ohm
Signal-to-noise ratio: 90DB
Rated Power: 180W + 180W
Frequency Response: 50-60
Signal input sensitivity: 0.25MV-220MV
Power input voltage: ~220V-240V/50-60Hz
Channel: 2.0
Product dimensions: 15 x 17 x 5cm
Product weight: 1000g
Package dimensions: 16 x 18 x 6cm
Packaging weight: 1100g
Packaging: carton + EPE
Package Content:
1 x Power Amplifier with power cable
1 x Remote control
1 x English instruction booklet |
Manufacturer |
LAB GRUPPEN |
Warranty |
1 Year Gurantee |
Channels |
Dual Channel |
Resistance ohms |
4Ω / 16Ω / 2Ω |
Power (4 ohms/Watt RMS) per channel |
1500 |
|
Manufacturer |
LAB GRUPPEN |
Warranty |
10 Years Gurantee |
Channels |
Four Channel |
Resistance ohms |
4Ω / 16Ω |
Resistance ohms |
2Ω |
Power (8 ohms/Watt RMS) per channel |
1300 |
Power (4 ohms/Watt RMS) per channel |
2100 |
Power (2 ohms/Watt RMS) per channel |
2500 |
Weight (kg) |
12 |
| Audien AM-150 Professional 2x 225Watt RMS final amplifier at 4 ohm, suitable for mounting on a 19" RACK with handles for easy transport. The amplifier offers very good sound quality with a power that can reach 225Watt at 4Ω or 150Watt at 8Ω per channel.
With a plethora of input and output options and leds to indicate the intensity of each channel, but also its overdrive. It is ideal for small cafes, restaurants, parties and shops.
It has a signal input on a 1/2 channel via RCA and Nail plugs - JACK 6.3mm.
It has a signal output to the speakers with three options, Speakon plugs, 6.3mm studs or with bare cables for direct connection.
Equipped with a Ground/Lift switch on its back side, it gives us the option to turn off the noises that come through the grounding of our network. It has a sturdy aluminum heatsink to avoid high temperatures during operation.
The Audien AM-150 is a professional amplifier proposal, with stable operation . |
Reviews
There are no reviews yet.