AUDIEN SP-08101-06 Woofer 8” 8OHM 60Wrms

• woofer 8"
• 60Hz - 5.5KHz
• 60Wrms
• 8ohm
• 94db

Nominal Specifications

    * Nominal Diameter 8“, 200 mm
    * Overall Diameter 8.81/8.18“, 223.8/207.9 mm
    * Bolt Circle Diameter 8.27“, 210 mm
    * Baffle Cutout Diameter 7.24“, 184 mm
    * Depth 4.59“, 116.7 mm
    * Flange and Gasket Thickness 0.42“, 10.7 mm


Electrical Specifications

    * Minimum Impedance 5.9 Ohm
    * Nominal Impedance 8 Ohm
    * Nominal Power Handling*** 200 W
    * Maximum Power Handling**** 400 W
    * Sensitivity (1W/1m) 92 dB
    * Frequency Range 80 - 5000 Hz
    * Voice Coil Diameter 2“, 52 mm
    * Winding Material Aluminium
    * Former Material Glass Fiber
    * Winding Depth 0.76“, 19.3 mm
    * Magnetic Gap Depth 0.27“, 7 mm
    * Flux Density 1.05 T


THIELE & SMALL Parameters

    * Resonant Frequency (fs) 74 Hz
    * DC Resistance (Re) 5.1 Ohm
    * BL Product (BL) 8.9 N/A
    * Diaphragm Mass inc. Airload (Mms) 23 grams
    * Mechanical Compliance of Suspension (Cms) 0.2 mm/N
    * Rms 2 Kg/s
    * Electromagnetic Q (Qes) 0.69
    * Mechanical Q (Qms) 5.30
    * Total Q (Qts) 0.61
    * Compliance Equivalent Volume (Vas) 0.32 ft³, 9 dm³
    * Surface Area of Cone (Sd) 27.5“², 177.3 cm²
    * Maximum Linear Excursion (Xmax)* 8.48 mm
    * Xdamage** 12.9 mm
    * Coil Inductance (Le) 0.6 mH
    * Diaphragm mass (Mmd) 21.6 g
    * Eta Zero 0.5 %

Notes

    * *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    * **Maximum excursion before permanent damage
    * ***2 Hours Test According to AES 2-1984 Rev. 2003
    * ****Maximum power is defined as 3dB greater than nominal power

Nominal Specifications

• Nominal Diameter 8“, 200 mm
• Overall Diameter 8.81/8.18“, 223.7/207.9 mm
• Bolt Circle Diameter 8.27“, 210 mm
• Baffle Cutout Diameter 7.20“, 183 mm
• Depth 3.88“, 98.5 mm
• Flange and Gasket Thickness 0.43“, 10.8 mm

• Minimum Impedance 6.4 Ohm
• Nominal Impedance 8 Ohm
• Nominal Power Handling*** 200 W
• Maximum Power Handling**** 400 W
• Sensitivity (1W/1m) 97 dB
• Frequency Range 80 - 6300 Hz
• Voice Coil Diameter 2“, 52 mm
• Winding Material Aluminium
• Former Material Glass Fiber
• Winding Depth 0.39“, 9.8 mm
• Magnetic Gap Depth 0.31“, 8 mm
• Flux Density 1.3 T

• Resonant Frequency (fs) 90 Hz
• DC Resistance (Re) 5.3 Ohm
• BL Product (BL) 13 N/A
• Diaphragm Mass inc. Airload (Mms) 23 grams
• Mechanical Compliance of Suspension (Cms) 0.14 mm/N
• Rms 1.53 Kg/s
• Electromagnetic Q (Qes) 0.41
• Mechanical Q (Qms) 8.5
• Total Q (Qts) 0.39
• Compliance Equivalent Volume (Vas) 0.29 ft³, 8.26 dm³
• Surface Area of Cone (Sd) 32.09“², 207 cm²
• Maximum Linear Excursion (Xmax)* 3.57 mm
• Xdamage** 10.65 mm
• Coil Inductance (Le) 0.41 mH
• Diaphragm mass (Mmd) 21.2 g
• Eta Zero 1.44 %

Notes

• *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
• **Maximum excursion before permanent damage
• ***2 Hours Test According to AES 2-1984 Rev. 2003
• ****Maximum power is defined as 3dB greater than nominal power

50 mm (2 in) copper voice coil
70 - 3000 Hz response
94 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
400 W continuous program power capacity
Ventilated voice coil gap for reduced power compression

Compatible with NEXO PS8 

• Specifications
  • Nominal diameter200 mm (8.0 in)
  • Nominal impedance8 Ω
  • Minimum impedance6.6 Ω
  • Nominal power handling *200 W
  • Continuous power handling *400 W
  • Sensitivity (1W/1m) *94.0 dB
  • Frequency range65 - 3000 Hz
  • Voice coil diameter51 mm (2.0 in)
  • Winding materialCopper
  • Former materialGlass Fibre
  • Winding depth17 mm (0.65 in)
  • Magnetic gap depth8 mm (0.31 in)
  • Flux density1.05 T
• Design
  • Surround shapeDouble Roll
  • Cone shapeExponential
  • Magnet materialNeodymium Inside Slug
  • SpiderSingle
  • Pole designStraight Pole
  • Woofer cone treatmentTWP Waterproof Both Sides
  • Recommended enclosure14.0 dm3 (0.49 ft3)
  • Recommended tuning65 Hz
• Parameters *
  • Fs66 Hz
  • Re5.3 Ω
  • Qes0.41
  • Qms3.6
  • Qts0.37
  • Vas14.0 dm3 (0.5 ft3)
  • Sd220.0 cm2 (34.1 in2)
  • η₀1.0 %
  • Xmax7.0 mm
  • Xvar7.0 mm
  • Mms28 g
  • Bl12.4 Txm
  • Le0.5 mH
  • EBP160 Hz
• Mounting And Shipping Info
  • Overall diameter225 mm (8.8 in)
  • Bolt circle diameter210 mm (8.3 in)
  • Baffle cutout diameter187.0 mm (7.4 in)
  • Depth90 mm (3.5 in)
  • Flange and gasket thickness11 mm (0.4 in)
  • Air volume occupied by driver1.1 dm3 (0.04 ft3)
  • Net weight1.8 kg (4.0 lb)
  • Shipping units1
  • Shipping weight2.2 kg (4.8 lb)
  • Shipping box300x160x180 mm (11.8x6.3x7.1 in)

• Nominal Basket Diameter 8“, 203.2 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 225 W / Music Program 450 W
• Resonance 65 Hz
• Usable Frequency Range 78 Hz - 4.5 kHz
• Sensitivity 95.1
• Magnet Weight 34 oz.
• Gap Height 0.312“, 7.92 mm
• Voice Coil Diameter 2“, 50.8 mm

• Resonant Frequency (fs) 65 Hz
• DC Resistance (Re) 5.99
• Coil Inductance (Le) 0.49 mH
• Mechanical Q (Qms) 4.95
• Electromagnetic Q (Qes) 0.42
• Total Q (Qts) 0.38
• Compliance Equivalent Volume (Vas) 23.3 liters / 0.82 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 63 cc
• Mechanical Compliance of Suspension (Cms) 0.37 mm/N
• BL Product (BL) 9.6 T-M
• Diaphragm Mass inc. Airload (Mms) 16 grams
• Efficiency Bandwidth Product (EBP) 156
• Maximum Linear Excursion (Xmax) 3.0 mm
• Surface Area of Cone (Sd) 210.0 cm²
• Maximum Mechanical Limit (Xlim) 7.4 mm

• Recommended Enclosure Volume Sealed 5.7-9.9 liters/0.2-0.35 cu.ft. Vented 8.5-19 liters/0.3-0.67 cu.ft.
• Overall Diameter 8.24“, 209.2 mm
• Baffle Hole Diameter 7.13“, 181 mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard Mounting Holes Diameter 0.22“, 5.5 mm
• Mounting Holes B.C.D. 7.75“, 196.9 mm
• Depth 3.5“, 89 mm

• Aluminum voice coil
• Polyimide former
• Ferrite magnet
• Vented core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Solid composition pape dust cap

Product type Loudspeaker Chassis