Content | This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli
Frequency Response |
20-20,000 Hz |
Channel Separation |
18 (dB at 1 kHz) |
Vertical Tracking Angle |
23° |
Vertical Tracking Force |
1.8-2.2 g (2.0 g standard) |
Stylus Construction |
Bonded round shank |
Recommended Load Impedance |
47,000 ohms |
Coil Impedance |
3.3 k ohms (1 kHz) |
DC Resistance |
485 ohms |
Coil Inductance |
550 mH (1 kHz) |
Load Capacitance |
100 to 200 pF |
Output |
4.0 mV (1 kHz, 5 cm/sec.) |
Channel Balance |
2.5 dB (1 kHz) |
Stylus Shape |
0.6 mil conical |
Cantilever |
Aluminum pipe |
Mount |
Half-inch |
Weight |
6.1 g (0.22 oz) |
Dimensions |
17.2 mm (0.68\") H × 18.9 mm (0.74\") W × 28.3 mm (1.20\") D |
Replacement Stylus |
AT-VMN95C |
Accessories Included |
Two 11 mm installation screws, two 8 mm installation screws, two washers |
| M44-7
Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide. Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
- Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
- With a 9.5 mV output, the M44-7 produces powerful, resonant sound.
- Skip Resistance: ultra high
- Output: ultra high
- Record Wear: ultra low
- Sound Emphasis: big bass
Tone Arm MountStandard 1/2 inch Cartridge TypeMoving Magnet Output VoltageTypical at 1 kHz9.5 mV RMS at 5 cm/sec peak velocity Recommended Load47 kilohms in parallel with 450pf Tracking ForceEffective at stylus tipRange: 1.5 to 3 grams Stylus CantileverShure Type SHeat-treated aluminum alloy / tubular1.6 mil wall thickness / 34.5 mil diameter Diamond Stylus TipPolished natural gemstone: SphericalRadius: 0.7 mil Frequency ResponseEssentially flat from 20 to 20,000 Hz
Stereo Channel BalanceWithin 2 dB Channel SeparationTypical at 1 kHz: 20 dB Net Weight6.7 grams Height15.9 mm Accessories IncludedAttached flip-down Stylus GuardHeadshell Screwdriver (Phillips)Extra Set of 4 Headshell Wires (4-99)Stylus Cleaning BrushHeadshell Weight (3 grams)User GuideMounting hardwareStylus guard Replacement NeedlesSingle with box & User Guide N44-74 Pack mounted on a card N44-7Q12 Pack mounted on a card N44-7Z
Made In Mexico |
Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.
Output voltage at 1000Hz, 5cm/sec.
|
11 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
22 dB
|
Channel separation at 15 kHz
| -
|
Frequency range at -3dB
|
20-18.000 Hz
|
Frequency response
|
20-18.000 Hz - 3 dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
|
Compliance, dynamic lateral
|
12 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
3,0 g (30 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
1.680 Ohm
|
Internal inductance
|
920 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-400 pF
|
Cartridge weight
|
5 g
|
Replacement stylus unit
| Q.Bert |
|
For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
This Ortofon Concorde Set contains;
- 2x Ortofon Concorde Scratch Element
- Ortofon Needle Brush
- All parts come in a special Ortofon box casing
Features:
Output Voltage at 1000Hz, 5cm/sec. : 7mV
Channel Balance at 1 Khz : 1,5dB
Channel Seperation at 1 Khz : 25dB
Channel Seperation at 15 Khz : 15dB
Frequency Range at 3db : 20-20.000Hz
Stylus Type : Spherical
Internal Impedance : 750 Ohm
Tracking Force recommended : 4,0G(40mN)
Cardridge Weight : 18,5 gram
Replacement Stylus Unit : Scratch |
|
For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
Output voltage at 1000Hz, 5cm/sec.
|
7 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
25 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range at -3dB
|
20-20.000 Hz
|
Frequency response
|
20-15.000 Hz 3dB/-2dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
80 μm
|
Compliance, dynamic lateral
|
6 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
3,0-5,0 g (30-50 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
750 Ohm
|
Internal inductance
|
450 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-600 pF
|
Cartridge weight
|
5 g
|
Replacement stylus unit
|
scratch
|
|
NUMARK'S ALL–AROUND CHAMP, FOR DURABILITY AND RELIABILITY
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 28dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: high versatility and skip resistance |
Reviews
There are no reviews yet.