Content |
- Aluminium cantilever
- 4.0mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- Replacement for AT95E and AT95EX
- 20 to 22,000Hz frequency response
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.
- Aluminium cantilever
- 4.0mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- Replacement for AT95E and AT95EX
- 20 to 22,000Hz frequency response
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
Model |
AT-VM95E |
Type |
VM Stereo Dual Magnet |
Mounting |
1/2” centres |
Frequency Response |
20 - 22,000 Hz |
Channel Separation |
20 dB (1 kHz) |
Output Channel Balance |
2.0 dB (1 kHz) |
Output Voltage |
4.0 mV (@ 1 kHz, 5 cm/sec) |
Vertical Tracking Angle |
23° |
Vertical Tracking Force Range |
1.8 - 2.2g (standard 2.0 g) |
Stylus Shape |
Elliptical |
Stylus Size |
0.3 x 0.7 mil |
Stylus Construction |
Bonded Round Shank |
Cantilever |
Aluminium Pipe |
Coil Impedance |
3.3 kΩ (1 kHz) |
Coil Inductance |
550 mH (1 kHz) |
DC Resistance |
485 Ω |
Static Compliance |
17 x 10 – 6 cm / dyne |
Dynamic Compliance |
7 x 10 – 6 cm / dyne (100 Hz) |
Wire Used for Coil |
T.P. Copper |
Recommended Load Impedance |
47,000 Ω |
Recommended Load Capacitance |
100-200 pF |
Cartridge Weight |
6.1g |
Dimensions |
17.2 x 18.9 x 28.3 ( H x W x D mm) |
Replacement Stylus |
AT-VMN95E |
Accessories Included |
Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers |
| M44-7
Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide. Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
- Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
- With a 9.5 mV output, the M44-7 produces powerful, resonant sound.
- Skip Resistance: ultra high
- Output: ultra high
- Record Wear: ultra low
- Sound Emphasis: big bass
Tone Arm MountStandard 1/2 inch Cartridge TypeMoving Magnet Output VoltageTypical at 1 kHz9.5 mV RMS at 5 cm/sec peak velocity Recommended Load47 kilohms in parallel with 450pf Tracking ForceEffective at stylus tipRange: 1.5 to 3 grams Stylus CantileverShure Type SHeat-treated aluminum alloy / tubular1.6 mil wall thickness / 34.5 mil diameter Diamond Stylus TipPolished natural gemstone: SphericalRadius: 0.7 mil Frequency ResponseEssentially flat from 20 to 20,000 Hz
Stereo Channel BalanceWithin 2 dB Channel SeparationTypical at 1 kHz: 20 dB Net Weight6.7 grams Height15.9 mm Accessories IncludedAttached flip-down Stylus GuardHeadshell Screwdriver (Phillips)Extra Set of 4 Headshell Wires (4-99)Stylus Cleaning BrushHeadshell Weight (3 grams)User GuideMounting hardwareStylus guard Replacement NeedlesSingle with box & User Guide N44-74 Pack mounted on a card N44-7Q12 Pack mounted on a card N44-7Z
Made In Mexico |
Features
• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case
Technical Data
Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
Frequency response: 20-15.000 Hz +3 / -2 dB
Stylus type: Spherical
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Cartridge weight: 5 g | The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.
Technical data |
|
Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
Channel balance at 1 kHz |
|
Channel separation at 1 kHz |
> 24 dB |
Channel separation at 15 kHz |
>15 dB |
Frequency range at - 3dB |
20-30.000 Hz |
Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
> 70 µm |
Compliance, dynamic, lateral |
13 µm/mN |
Stylus type |
Nude Fine Line |
Stylus tip radius |
r/R 8/40 µm |
Tracking force range |
1,8-2,2 g (18-22 mN) |
Tracking force, recommended |
2 g (20 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
100 Ohm |
Recommended load impedance |
47 kOhm / |
Cartridge body material |
Noryl |
Cartridge colour |
Black |
Cartridge weight |
4,1 g |
|
Type: MC-type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10O (1kHz)
DC resistance: 10O
Load resistance: More than 100O (when head amp connected)
Coil inductance: 22µH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: Oval (0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1
|
2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.
The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.
TECHNICAL DATA |
| Output voltage at 1000 Hz, 5cm/sec. | 5 mV | Channel balance at 1 kHz | 1 dB | Channel separation at 1 kHz | 26 dB | Channel separation at 15 kHz | 15 dB | Frequency range at - 3dB | 20-29.000 Hz | Frequency response | 20-20.000 + 2 / - 0 dB | Tracking ability at 315Hz at recommended tracking force | 80 µm | Compliance, dynamic, lateral | 22 µm/mN | Stylus type | Nude Fine Line | Stylus tip radius | r/R 8/40 µm | Tracking force range | 1,4-1,7g (14-17 mN) | Tracking force, recommended | 1,5 g (15 mN) | Tracking angle | 20° | Internal impedance, DC resistance | 1,2 kOhm | Internal inductance | 630 mH | Recommended load resistance | 47 kOhm | Recommended load capacitance | 150-300 pF | Cartridge colour, body/stylus | Black/Bronze | Cartridge weight | 7,2 g | Replacement stylus unit | 2M Bronze | |
Reviews
There are no reviews yet.