| Content | The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
| Specs:
- Semi - Open
- Innovative bass refelx system
- Rugged headband cosntruction
- Single-sided coiled cable
- Soft headband pad
- Gold plated stereo mini jack (3.5mm) and 1/4" adapter
- Transducer type: Dynamic
- Frequency response: 5 - 35,000 Hz
- Nominal impedance: 250 ohm
- Nominal SPL : 96 dB
- T.H.D: < 0.2%
- Power handling capacity: 100 mW
- Sound coupling to ear: Circumaural
- Weight (without cable) 295 g
|
- Professional hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High ambient noise attenuation
- For broadcast and DJ use
- Rugged construction for tough handling
- Leatherette ear pads and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed K 171 MK II combines the benefits of a closed-back design with the lightweight and comfort of supra-aural headphones.
The K 171 MK II is an excellent choice for DJ and broadcast applications where no sound can bleed from the headphones into live microphones.
The closed-back, loud and rugged design gives the K 171 MK II a different low-frequency character and maintains its comfort and flexibility.
| Type | closed-back, dynamic headphones | | Sensitivity | 94 dB/mW, 107 dB/V | | Frequency range | 18 to 26,000 Hz | | Rated impedance | 55 ohms | | Max. input power | 200 mW | | Earpads | leatherette and velvet | | Cable | 3 m single-sided and 5 m coiled cable (99,9% oxygen-free); plug-in cable on headphones (mini-XLR connector) | | Connector | gold plated stereo mini jack | | Adapter | gold plated 1/8" to 1/4" screw-on adapter | | Net weight (without cable) | 200 g (7.1 oz.) | | Shipping weight | 500 g (17.6 oz.) | | Patent(s) | Varimotion – multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651); Acoustics slot resistor for dynamic transducer (Patent no. AT 408.706, US 6,639,991, ZL 01116806) |
| K 240 Studio
The Studio version of these classic hi-fi stereo headphones uses XXL speakers
with Varimotion diaphragms for higher sensitivity, a wider dynamic range, and
higher sound levels. Other features include semi-open earphones, a solid bass
range, clear highs, and excellent comfort.Also connects to portable equipment
(CD players, DAT recorders, notebook computers, etc.)
SPECIFICATIONS:
General Specifications
Headphone type: semi-open
Max. Input Power: 200 mW
Sensitivity headphones: 104 dB SPL/V
Rated Impedance: 55 Ohms
Detachable cable: yes
Cable Length: 3 m
Earpads replaceable: yes
Audio Specifications
Maximum input power: 200 mW
Audio frequency bandwidth: 15 - 25000 Hz
Dimensions
Length: 110 mm
Width: 190 mm
Height: 200 mm
Net Weight: 240 g
Audio Interface
Type: Stereo plug – 3.5mm (1/8-inch) with 6.3 mm (1/4") screw-on adapter
Gender: Male
Contacts: 3-pin
Cable
Detachable: Yes
Wearing Style
Over-ear: Yes
Application
Studio Mixing: Yes
Hi-Fi Listening: Yes
Foldable
Not foldable: Yes
Cup Style
Semi-open: Yes |
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
| DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
80 ohms |
| Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
| Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
300 g |
|
Reviews
There are no reviews yet.