The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing. Advanced build quality and engineering 40 mm drivers with rare earth magnets and copper-clad aluminum […]
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced low-frequency performance
Circumaural design contours around the ears for excellent sound isolation in loud environments
Convenient single-side cable exit
Specifications
Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 – 20,000 Hz
Maximum Input Power: 700 mW at 1 kHz
Sensitivity: 96 dB
Impedance: 47 ohms
Weight: 190 g (6.7 oz), without cable and connector
Cable: 3.0 m (9.8′), straight, left-side exit
Accessory Included: 6.3 mm (1/4“) snap-on adapter
Weight
1.00 kg
Reviews
There are no reviews yet.
Be the first to review “AUDIO TECHNICA ATH-M20X CLOSED TYPE HEADPHONES FOR MONITORING” Cancel reply
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced low-frequency performance
Circumaural design contours around the ears for excellent sound isolation in loud environments
Convenient single-side cable exit
Specifications
Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 - 20,000 Hz
Maximum Input Power: 700 mW at 1 kHz
Sensitivity: 96 dB
Impedance: 47 ohms
Weight: 190 g (6.7 oz), without cable and connector
Cable: 3.0 m (9.8'), straight, left-side exit
Accessory Included: 6.3 mm (1/4“) snap-on adapter
The SRH1440 Professional Open Back Headphones provide full-range audio with detailed highs and rich bass in a sleek, attractive design. Made for mastering and critical listening, the premium padded headband with steel frame offers hours of listening comfort.
The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment.
40 mm Neodymium drivers deliver full-range audio with rich, controlled bass Open-back, circumaural design for exceptionally natural sound, wide stereo image, and increased depth of field Impedance optimized for direct connection to wide range of portable audio devices Fully adjustable, premium padded headband with steel frame and sleek, ergonomic design for hours of listening comfort Oxygen-free copper cable with Kevlar® reinforced jacket for superior performance and durability Dual-exit cables with gold-plated MMCX connectors provide secure connection and detachability for easy storage or replacement Replaceable velour ear pads with high-density, slow-recovery foam for exceptional comfort Individually tested and serialized Legendary Shure durability to withstand the rigors of everyday use
Type Open-back, circumaural Frequency Range 15 Hz – 27 kHz
Cable Length 6.9 ft (2.1 m) Plug Gold-plated 1/8" (3.5 mm) stereo mini-jack
DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
Transmission type
Wired
Headphone design (operating principle)
Closed
Headphone impedance
80 ohms
Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones.
5 - 30.000 Hz
Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume.
Professional circumaural hi-fi stereo studio headphones
Self-adjusting headband for optimum fit
Patented Varimotion speakers
High noise attenuation
For onstage and studio use
Automute feature mutes headphones when they are taken off
Leatherette and additional velvet ear pads
Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed AKG legend, K 271 MK II combines the benefits of AKGʼs circumaural design for extreme comfort and a closed-back design for maximum isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich.
The K 271 MK II is the perfect choice for any application where sonic bleed could cause problems such as broadcast work.
Another important feature of the K 271 MK II is the addition of a switch in the headband that mutes the audio just as soon as the headphones are taken off.
By the way, the K 271 MK II is also available as a headset with dynamic microphone (HSD 271) or condenser microphone (HSC 271).
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
Designed for professional audio engineers and in-studio talent, SRH940 Headphones from Shure deliver accurate response across the entire audio spectrum for smooth high-end extension with tight bass.
Superior transient response provides minimal distortion. The collapsible, lightweight design with premium padded headband offers superior comfort and portability. Two included detachable cables (straight and coiled) and a replacement set of velour ear pads ensure a long product life.
Also includes a hard zippered travel case and a threaded 1/4" (6.3) mm gold-plated adapter.
Accurate frequency response delivers smooth high-end extension with tight bass, and superior transient response for minimal distortion Lightweight, ergonomic fit with premium padded headband provide maximum comfort over extended periods Closed-back, circumaural design rests comfortably over the ears and reduces background noise Collapsible design with 90-degree swivel ear cups for convenient storage and portability Legendary Shure quality to withstand the rigors of everyday use Bayonet Clip securely locks cable into ear cup Replaceable velour ear pads included to ensure long product life and maximum comfort Two included detachable cables (coiled & straight) provide flexible wearing options and easy replacement Zippered hard travel case protects headphones when on the go or not in use
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.