Content |
This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year. The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables. From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.
- Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
- Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- 90° swiveling earcups for easy, one-ear monitoring
- Professional-grade earpad and headband material delivers more durability and comfort
- Detachable cable (3 cables included)
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 45 mm
- Magnet: Neodymium
- Voice Coil: CCAW (Copper-clad aluminum wire)
- Frequency Response: 15 - 28,000 Hz
- Max Input Power: 1,600 mW @ 1KHz
- Sensitivity: 99 dB
- Impedance: 38 ohms
- Folding/collapsible: Yes
- Weight: 10 oz (284 g) without cable/connector
- Cable - Detachable: Yes
- Cable Includes: 1.2m-3m coiled, 3m straight, 1.2m straight cables
- Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
- Accessories included: Screw-on 1/4" adapter, pouch
|
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
| In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones.
Budget Headphones Closed Type with High-performance Studio Headphones
Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget.
Behringer HPS5000 Headphones Features at a Glance:
- Ultra-wide frequency response
- High-definition bass and super-transient highs
- Highly-efficient cobalt capsule
- Outstanding dynamic range
- Single-sided coiled cord with oxygen-free copper wires
- Optimised oval-shaped ear cups
- 1/8'' connector plus 1/4'' adapter included
- Ultra-rugged headband construction
- Designed and engineered in Germany
Headphone
Driver Size |
1.6" / 40 mm |
Driver Type |
Dynamic |
Magnet Type |
Cobalt |
Design |
Over-Ear (Circumaural) |
Earcup Style |
Closed-Back |
General
Frequency Response |
20 Hz to 20 kHz |
Sensitivity |
113.5 dB at 1 kHz |
Impedance |
32 Ohms |
Maximum Power Handling |
100 mW |
Connectivity
Audio Connector to Source |
1/8" / 3.5 mm |
Adapter (Included) |
1/4“ |
Cable
Cable Length |
3.3 to 8.2\' / 1 to 2.5 m (Coiled) |
| DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
Transmission type |
|
Wired |
Headphone design (operating principle) |
|
Closed |
Headphone impedance |
|
80 ohms |
Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
Construction |
|
Circumaural (around the ear) |
Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
Net weight without packaging |
|
300 g |
| K 701
* Revolutionary flat-wire voice coil technology
* Patented AKG Varimotion ultra-precision two-layer diaphragm
* Self-adjusting cushioned genuine-leather headband
* Bi-wiring, high-performance cable with 1/4" jack plug
* Comfortable, specially shaped "3D-Form" ear pads
* Complete with stylish storage cradle
* Individually tested and numbered
Whether you prefer the holistic approach or like to listen analytically, the K 701
will turn perception into pure enjoyment.
AKG is the first manufacturer in the world to use revolutionary flat-wire technology
in headphones, namely, the K 701. The result is a truly dramatic sound that places
every musician at their correct location with pinpoint accuracy. This kind of agility,
spaciousness, brilliant highs, and velvety, punchy bass is simply miraculous.These
superlative open-back dynamic headphones provide an outstandingly accurate sound
and excellent imaging. Try the K 701 and find out what ingenious headphone engineering
can do for you.
SPECIFICATIONS:
Type Open-back, dynamic headphones
Efficiency 105 dB/V
Frequency range 10 Hz to 39.8 kHz
Rated impedance 62 ohms
Max. input power 200 mW
Cable bi-wiring, single-sided, 99.99% oxygen-free cable, 3 m (10 ft.)
Connector 1/4" hard gold plated | The SRH1840 Professional Open Back Headphones feature individually matched drivers for unparalleled acoustic performance, including smooth, extended highs and accurate bass. Developed with premium materials and precision engineering, the custom-crafted design is extremely lightweight and durable. Ideal for mastering or critical listening applications.
The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment.
Individually matched 40 mm neodymium drivers for unparalleled acoustic performance with smooth, extended highs and accurate bass
Open-back, circumaural design for exceptionally natural sound, wide stereo image, and increased depth of field
Lightweight construction featuring aircraft-grade aluminum alloy yoke and stainless steel grilles for enhanced durability
Steel driver frame with vented center pole piece improves linearity and eliminates internal resonance for consistent performance at all listening levels
Ergonomic dual-frame, padded headband is lightweight and fully adjustable for hours of listening comfort
Optimized for connection to external headphone amplification systems
Oxygen-free copper cable with Kevlar® reinforced jacket for superior performance and durability
Dual-exit cables with gold-plated MMCX connectors provide secure connection and detachability for easy storage or replacement
Replaceable velour ear pads with high-density, slow-recovery foam for exceptional comfort
Individually tested and serialized
Legendary Shure durability to withstand the rigors of everyday use
Type
Open-back, circumaural
Sensitivity
96 dB SPL/mW
Maximum Input Power
1000 mW
Frequency Range
10 Hz – 30 kHz
Weight
0.59 lbs (268 g)
Cable Style
Dual-exit, detachable oxygen-free copper
Cable Length
6.9 ft (2.1 m)
Plug
Gold-plated 1/8" (3.5 mm) stereo mini-jack |
Reviews
There are no reviews yet.