| Content |
The Audio-Technica Consumer ATR4650-USB is a compact USB microphone that can be clipped on clothing or mounted to a surface such as a monitor frame making it ideal for vloggers, YouTubers, and live streamers. With its USB Type-C cable and USB Type-A adapter, it conveniently works with USB-equipped smartphones, tablets, and computers.
Operation is simple and straightforward thanks to its plug-and-play compatibility and USB powering. The 6' attached cable allows plenty of slack for you to maintain sufficient distance between the mic and your device. The condenser element's omnidirectional polar pattern picks up sound from all directions, so you don't have to worry about precisely angling the mic.
- Utility USB microphone for computer applications
- Easily portable boundary mic plugs into USB input on a computer, tablet, smartphone or other device
- 1.8 m (6') cable is terminated with USB-C connector, and comes with USB-C to USB-A adapter
- Slim-profile mount for easy attachment to flat-panel monitor or other surface
- Integral clothing clip enables use as a lapel microphone
- Omnidirectional pickup pattern offers full 360° coverage
Microphone
Element : Condenser
Polar Pattern : Omnidirectional
Freq response : 50 - 13,000 Hz
Open circuit sensitivity : -48 dB
Power Requirement : 5v DC
|
C 562 CM
Small, low-profile boundary layer microphone
Wide frequency range
High sensitivity
Ideal for inconspicuous installation in a room
Suited for surveillance or recording
The C 562 CM flush-mount boundary microphone uses the same transducer as the C 562 BL.
The C 562 CM has been designed specifically for permanent, "invisible" mounting in ceilings,
walls, tables, stage props, etc.
Owing to its high sensitivity, the C 562 CM is a perfect tool for surveillance or live recording
since a single microphone can cover an entire room. The supplied XLR phantom power adapter
connects to the microphone cable through a miniature connector so installation holes can be
smaller than the diameter of the phantom power adapter.
SPECIFICATIONS:
Polar pattern omnidirectional (hemispherical)
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 130 dB (k=1 %)
Equivalent noise level 16 dB-A
Signal/noise ratio (A-weighted) 78 dB
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN/IEC
Current consumption Connector 3-pin XLR
Cable 0.5 m (20 in.)
Finish matte nickel plated
Dimensions 20 dia. x 28 mm (0.8 dia. x 1.1 in.)
Net weight 30 g (1.1 oz.)
Shipping weight 195 g (76.9 oz.)
|
AKG Podcaster Essentials, includes everything you need to get professional quality audio for your podcasts or videos, including an AKG Lyra Ultra-HD multimode USB microphone and the AKG K371 professional closed-back headphones. Lyra has four selectable capture modes—Front, Front + Back, Tight Stereo and Wide Stereo—making it capable of capturing audio in a variety of applications and up to 24-bit/192kHz high-resolution audio. AKG K371 professional studio headphones combine performance, accuracy and supreme comfort in a compact, folding design that’s ideal for production in the studio or on location. K371s are precision-engineered to match AKG’s
Reference Response acoustic target to reproduce natural, balanced audio in extraordinary detail.
The package includes: 1 x USB-C to USB-A cable, 1 x 1.2 m (2.5) straight headphone cable, 1 x 3.0 m (9.8) straight headphone cable, 1 x 3.0 m (9.8) coiled headphone cable, 1 x 3.5 mm (1/8/") to 6.5 mm (1/4/") headphone adapter, 1 x Dual-headphone adapter (supports two headphone connections), 1 x Protective headphone carrying pouch
Specifications (Microphone)
- Type: Condenser
- Polar Pattern: Front, Front & Back, Tight Stereo and Wide Stereo
- Frequency Response: 20 to 20,000 Hz
- Microphone Bit Depth/Sample Rate: 24-bit/192 kHz
- Max SPL: 129 dB SPL (0.5% THD)
- Microphone Power Requirement / Consumption: 5V USB / 75 mA
- Output Connection: USB 2.0
- Headphone Output Impedance: 16Ω
- Headphone Power Output (RMS): 43 mW
- Headphone Frequency Response: 20 Hz – 22 kHz
- Microphone Headphone Output S/N Ratio: 98.0dB
Specification (Headphones)
- Headphone Type: Closed Back
- Driver Size: 50mm
- Voice Coil: Pure OFC voice coil
- Frequency Response: 5 Hz – 40 kHz
- Sensitivity (SPL): 114 dB SPL/V @ 1 kHz
- Impedance: 32 ohms
- Weight: 255g
| Uber Mic is the perfect set-up for all your recording needs—whether it’s recording acoustic instruments & vocals, capturing pristine audio for podcasts & broadcasting, or simply bringing your gaming experience to the next level. Uber Mic does it all – start recording, streaming & broadcasting now!
• Cardioid – a directional pattern, perfect for capturing singular sound sources while eliminating unwanted room reflections and background noise
• Omnidirectional – equal output/sensitivity at all angles captures your sound sources from all directions, perfect for adding some ambience to your recordings or capturing a group of sound sources
• Figure 8 - equal output/sensitivity on two sides of the microphone, ideal for capturing two independent sound sources simultaneously
• Stereo – picks up from the left and right side of the microphone, producing a true stereo image
Features
- Easy, intuitive operation for any application
- Wide-range 30–20,000Hz frequency response delivers detailed, natural sound
- 3-capsule condenser microphone element, including single-point stereo
- 4 selectable polar patterns to customize your ideal recording
- Polar patterns: cardioid, figure-8, omnidirectional, and stereo
- 1/8” headphone jack and internal headphone amplifier
- USB/direct mixing control with mic volume control enables zero-latency recording and monitoring
- Microphone mute control ensures privacy
- LCD display shows polar pattern and currently selected control level
- Studio-quality recording and playback for accurate reproduction
- Convenient desktop mounting with threaded insert for optional stand-mounting
- Integrated stand fits easily into any setup
- iOS compatibility using the Apple iPad Camera Connection Kit (sold separately)
Specifications
- Microphone:
- Type: 3-capsule condenser USB microphone
- Capsule Size: 16mm
- Polar Patterns: Figure 8, cardioid, omni, and stereo
- Frequency Response: 30 Hz - 20 KHz
- Sensitivity: -45 dB (0 dB = 1V/Pa @ 1 kHz)
- SNR: 110 dB
- Maximum SPL: 120 dB (THD
|
The half-cardioid e 901 is the perfect condenser microphone for kick drum. It is highly robust and step-resistant. It benefits from an integrated preamp.
Pick-up pattern : half-cardioid
Frequency response : 20...20 000 Hz
Sensitivity in free field, no load : (1kHz) 0,5 mV/Pa
Max. Sound pressure level (aktiv) : 154 dB / SPL
Phantom powering : 48 V / 1,1 mA
Nominal impedance :
Min. terminating impedance : 1000 Ohm
Dimensions : 126,5 x 105 x 26,5 mm
Weight : ca. 550 g
| The NT-USB Mini is a compact, studio-quality USB microphone designed for recording direct to a computer or tablet.
It is simple to set-up and use, and a smooth frequency response and directional pickup pattern make the NT-USB Mini perfect for recording vocals and instruments, livestreaming and gaming, podcasting, voice calls and more.
The included desk stand features a magnetic base that can be detached for easy mounting on mic stands or studio arms, and with its in-built pop filter and zero-latency headphone monitoring, the NT-USB Mini delivers crisp, clear audio in all recording applications.
Acoustic Principle: Pressure gradient Active Electronics: Electret condenser, A/D and USB interface Polar Pattern: Cardioid
Frequency Range: 20 Hz – 20 kHz
Input SPL @ 1%THD: 121dB (A-weighted, as per IEC651) Sample Rate: 48 kHz
Bus Powered: Yes
Bit Depth: 24-bit Analog Output: 3.5mm headphone
Computer Connectivity: USB - simultaneous I/O Mono input, stereo output
Output Connection: USB-C OS Requirements: macOS 10.12 / Windows 10
Weight (grams): 585
Dimensions (millimetres): Height: 141.9 Width: 54.5 Diameter (base): 89.3
• Studio-quality microphone with U SB-C connectivity
• 3.5mm headphone output with zero-latency monitoring
• Easy set-up, plug in and play
• Detachable magnetic desk stand
• In-built pop ? lte
| Polar Chart: |
Cardioid |
| USB compatibility: |
Yes |
|
Reviews
There are no reviews yet.