Audio Technica U891RWx Cardioid condenser boundary microphone with switch

325.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: U891RWx Category:
Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891Rx cardioid condenser boundary microphone features a touch-sensitive on-off switch that can be set to three modes: press-on/press-off, press to talk, and press to mute. The phantom-powered microphone is equipped with a unique PivotPoint® rotating output connector and an LED status indicator. […]

 

Read more

Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891Rx cardioid condenser boundary microphone features a touch-sensitive on-off switch that can be set to three modes: press-on/press-off, press to talk, and press to mute. The phantom-powered microphone is equipped with a unique PivotPoint® rotating output connector and an LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; an 80 Hz low-cut UniSteep® filter reduces pickup of low-frequency ambient noise. The microphone’s heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. The unit’s self-contained electronics eliminate the need for an external power module.

 

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 104 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 4 mA typical
  • Weight: 264 g
  • Dimensions: 108.0 mm long, 84.0 mm maximum width, 23.0 mm height
  • Output Connector: TB3M-type
  • Cable: 7.6 m long, 3.2 mm diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors

 

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • Ultra-quiet electronic switch can be set to any of three operating modes: “touch-on/ touch-off,” “touch-to-talk” and “touch-to-mute“
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in two colors: black (U891Rx) and white (U891RWx)

 

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica U891RWx Cardioid condenser boundary microphone with switch”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica U891RWx Cardioid condenser boundary microphone with switch removeSHURE MX-393C - Cardioid Boundary Microphone removeAKG CBL 410 PCC WHITE Condenser microphone boundary removeAudio Technica U851A Cardioid condenser boundary microphone removeAKG C 547 BL HYPERCARDIOID CONDENSER BOUNDARY LAYER MICROPHONE removeAUDIO TECHNICA PRO44 Boundary Microphone remove
NameAudio Technica U891RWx Cardioid condenser boundary microphone with switch removeSHURE MX-393C - Cardioid Boundary Microphone removeAKG CBL 410 PCC WHITE Condenser microphone boundary removeAudio Technica U851A Cardioid condenser boundary microphone removeAKG C 547 BL HYPERCARDIOID CONDENSER BOUNDARY LAYER MICROPHONE removeAUDIO TECHNICA PRO44 Boundary Microphone remove
Image
SKUU891RWxMX393CCBL 410 PCC WHITEU851AC 547BLPRO44
Rating
Price 325.00 incl. GR VAT 281.00 incl. GR VAT 100.17 incl. GR VAT 300.00 incl. GR VAT 580.00 incl. GR VAT 135.00 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityIn stockOnly 1 left in stock (can be backordered)Available on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891Rx cardioid condenser boundary microphone features a touch-sensitive on-off switch that can be set to three modes: press-on/press-off, press to talk, and press to mute. The phantom-powered microphone is equipped with a unique PivotPoint® rotating output connector and an LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; an 80 Hz low-cut UniSteep® filter reduces pickup of low-frequency ambient noise. The microphone's heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. The unit's self-contained electronics eliminate the need for an external power module.

   
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 104 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 4 mA typical
  • Weight: 264 g
  • Dimensions: 108.0 mm long, 84.0 mm maximum width, 23.0 mm height
  • Output Connector: TB3M-type
  • Cable: 7.6 m long, 3.2 mm diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors
 
  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • Ultra-quiet electronic switch can be set to any of three operating modes: "touch-on/ touch-off," "touch-to-talk" and "touch-to-mute“
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in two colors: black (U891Rx) and white (U891RWx)

 

 MX393C - Condenser Boundary Microphone, Built-in Preamp, 12-ft Tini "QG" ? to XLR Cable, Programmable Switch and LED Indicator

About the AKG Acoustics CBL 410 PCC

The AKG CBL 410 PCC Conference Microphone Set (Black) is a simple to use, plug and play desktop microphone for use with any PC or laptop. It improves audio quality incredibly when making a conference via VOIP. The microphone reproduces the voice with a clear and natural sound.

With its 3.5 mm stereo jack, it is a 100% plug and play device. No drivers are needed. Its ability to be cascaded makes the CBL 410 PCC the perfect tool for modern communication for both single person use in the office and/or multi-person use in a modern meeting room.

This microphone provides optimum intelligibility and audio quality for your meetings. The CBL 410 PCC is also an excellent choice for recording applications.

AKG Acoustics CBL 410 PCC Includes
  • AKG 3x CBL 410 PCC PC Boundary Layer Microphones
  • GHAP1 USB Adapter
  • AKG Warranty
  AKG Acoustics CBL 410 PCC Features
  • Small and inconspicuous
  • Exceptionally rugged
  • Excellent sound quality
  • High sensitivity
  • Low self-noise
  AKG Acoustics CBL 410 PCC Specifications
Polar pattern Omnidirectional
Microphone Type Back electret condenser microphone
Frequency response 50 Hz to 20 kHz
Impedance 2000 ohms ±30% at 1000 Hz
Sensitivity -42 dB ±3 dB (7.9 mV/Pa)Sensitivity:
Maximum current consumption 0.5 mA
Supply voltage 1.5 to 5 V DC
Cable length 100cm (40“)
Connector TRS mini jack
   

Offering outstanding Audio-Technica sound for surface-mount applications, the U851A features a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. This battery- or phantom-powered condenser microphone accepts interchangeable condenser elements - available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. Its heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. With superior off-axis rejection and maximum gain-before-feedback, this professional microphone sets audio-quality standards in challenging acoustic environments.

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance black finish for minimum visibility
  • Operates on battery or phantom power

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: Phantom: -40 dB (10.0 mV) re 1V at 1 Pa Battery: -41 dB (8.9 mV) re 1V at 1 Pa
  • Impedance: Phantom: 200 ohms Battery: 270 ohms
  • Maximum Input Sound Level: Phantom: 133 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: Phantom: 111 dB,1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Battery Type: 1.5V AA/UM3
  • Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
  • Switch: Off, on-flat, on-roll-off
  • Cable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
  • Accessories: AT8531 power module; battery; soft protective pouch

 

C 547 BL 

"Non-crush" case
Inconspicuous
Hypercardioid polar pattern
Easy to repaint
 
Hypercardioid, studio-quality boundary microphone with rugged, "non-crush" case and
switchable bass-cut filter for reducing footfall noise, ideal for tough on-stage assignments.
Other benefits include optimum acoustic properties, high directivity, and neutral sound.
Having the same frequency response, the C 547 BL can be combined with the CK 47 with
excellent results.
Primarily designed for use in places of worship, theaters, and conferencing, the C 547 BL
is also a good choice for miking kick drums and other instruments.

SPECIFICATIONS:
Polar pattern hypercardioid
Frequency range 30 to 18,000 Hz
Sensitivity 8.5 mV/Pa (-42 dBV)
Max. SPL 133 dB (for 1% THD)
Equivalent noise level 22 dB-A
Signal/noise ratio (A-weighted) 72 dB
Bass filter 12 dB/octave at 150 Hz
Impedance 400 ohms
Recommended load impedance >1000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption

With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic\'s self-contained electronics eliminate the need for external power modules. The PRO44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance.

Low profile for minimum visibility
Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Rugged design and construction
25\' (7.6 m) detachable cable (TA3F to XLRM-type)

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response: 70-16,000 Hz
Open Circuit Sensitivity: -25 dB (56.2 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 114 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 86 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 9-52V, 2 mA typical
Weight: 2.4 oz (67 g)
Dimensions: 2.87" (73.0 mm) maximum width, 3.56" (90.5 mm) maximum length, 0.59" (15.0 mm) height
Output Connector: TB3M-type
Cable: 25\' (7.6 m) long, with TA3F and XLRM-type connectors

Weight0.10 kg0.40 kg1.00 kg0.10 kg0.42 kg0.25 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.40 kg
Weight 1.00 kg
Weight 0.10 kg
Weight 0.42 kg
Weight 0.25 kg