AUDIX ADX20iP Miniature instrument microphone for sax and brass

184.50 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The ADX20iP is applicable for professional stage and studio applications. This mic is primarily used for miking most reed and brass instruments. The ADX20iP has a uniformly controlled cardioid polar pattern, which provides excellent isolation and feedback control on stage with natural sound reproduction at very close distances. The ADX20iP is lightweight, compact and simple […]

 

Read more

The ADX20iP is applicable for professional stage and studio applications. This mic is primarily used for miking most reed and brass instruments.

The ADX20iP has a uniformly controlled cardioid polar pattern, which provides excellent isolation and feedback control on stage with natural sound reproduction at very close distances.

The ADX20iP is lightweight, compact and simple to use. Included with the ADX20iP is a gooseneck clip with spring tension for easy mounting to the bell of an instrument.

Model Variation:   ADX20i – for use with RAD360 wireless system.  No power adapter is included with this model. 

The ADX20i requires phantom power of 9-52 V.

Type Pre-polarized Condenser
Polar Pattern Cardioid, Hypercardioid
Frequency Response 40Hz – 20kHz
Impedance 250 Ohms
Sensitivity 6 mV/Pa @1k (C) / 5.6 mV/Pa @1k (HC)

 

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIX ADX20iP Miniature instrument microphone for sax and brass”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIX ADX20iP Miniature instrument microphone for sax and brass removeELECTRO VOICE PL35 Snare/Tom DYNAMIC CARDIOID MICROPHONE removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSENNHEISER E-904 CARDIOID DYNAMIC INSTRUMENT MICROPHONE removeBEYERDYNAMIC M 88 TG Dynamic Microphone (Hypercardioid) removeNPG CB-410 Instrument Microphone 48V remove
NameAUDIX ADX20iP Miniature instrument microphone for sax and brass removeELECTRO VOICE PL35 Snare/Tom DYNAMIC CARDIOID MICROPHONE removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSENNHEISER E-904 CARDIOID DYNAMIC INSTRUMENT MICROPHONE removeBEYERDYNAMIC M 88 TG Dynamic Microphone (Hypercardioid) removeNPG CB-410 Instrument Microphone 48V remove
Imagebeyerdynamaic m 88 tg dynamic hyperdioid microphone
SKUADX20iP001809LDWS1000MWH10SE00103M-88 TGCB-410
Rating
Price 184.50 incl. GR VAT 98.00 incl. GR VAT 108.04 incl. GR VAT 179.00 incl. GR VAT 439.00 incl. GR VAT 47.11 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

In stock (can be backordered)

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockIn stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Legendary, universal all purpose microphone classic
  • Perfectly suitable for stage and studio
  • Unbelievably rich sound
  • Made in germany
Content

The ADX20iP is applicable for professional stage and studio applications. This mic is primarily used for miking most reed and brass instruments.

The ADX20iP has a uniformly controlled cardioid polar pattern, which provides excellent isolation and feedback control on stage with natural sound reproduction at very close distances.

The ADX20iP is lightweight, compact and simple to use. Included with the ADX20iP is a gooseneck clip with spring tension for easy mounting to the bell of an instrument.

Model Variation:   ADX20i - for use with RAD360 wireless system.  No power adapter is included with this model. 

The ADX20i requires phantom power of 9-52 V.

Type Pre-polarized Condenser
Polar Pattern Cardioid, Hypercardioid
Frequency Response 40Hz - 20kHz
Impedance 250 Ohms
Sensitivity 6 mV/Pa @1k (C) / 5.6 mV/Pa @1k (HC)

 

Audio Frequency Response    50 Hz - 16,000 Hz
Case Material    Die cast zinc
Connector Type    3-pin XLR
Element    Dynamic
Finish    Textured Satin Black
Impedance, Low-Z balanced    600 Ω
Mic Type    Instrumental
Open Circuit Voltage    2.2 mV/Pascal
Polar Pattern    Supercardioid
Power Requirement    Passive
Wired/Wireless    Wired
Weight Net    8.32 oz (236 g)

LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter
  • Especially for tom and snare recording
  • Polar pattern: cardioid
  • Frequency range: 40 - 18,000 Hz
  • Impedance: 350 Ω
  • Robust metal chassis
  • Incl. special tom holder
  • Bag included
  • Dimensions: 63 x 41 mm
  • Weight: 125 g

Technical Data

Transducer Type: Dynamic
Polar Pattern: Hypercardioid
Microphone Frequency Response: 30 - 20.000 Hz
Connection Type: XLR 3-pin

Made in Germany

Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.

 
Perfect for heavy bass Sources
The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!  
Flexible tool iN The studio

The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.


Type: Black Electret Condenser
Polar Pattern: Uni-Directional
Frequency: 50Hz-16KHz
Sensitivity: -45dB
Output Impedance: 250 Ohm
Mixer Phantom Power: +48V
Ideal for wind & string  musical instruments
Weight1.00 kg0.25 kg0.35 kg0.30 kg0.600 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.25 kg
Weight 0.35 kg
Weight 0.30 kg
Weight 0.600 kg
Weight 1.00 kg