Large diaphragm condenser microphone for recording, broadcast. and live sound The large diaphragm condenser microphone CX112B has a contemporary design and superior performance characteristics. This mic is an exceptional tool for professional audio production, project studios and live stage performances. Delivering a smooth, uniform frequency response the CX112B offers a rich, full bodied sound delivered […]
Large diaphragm condenser microphone for recording, broadcast. and live sound
The large diaphragm condenser microphone CX112B has a contemporary design and superior performance characteristics. This mic is an exceptional tool for professional audio production, project studios and live stage performances.
Delivering a smooth, uniform frequency response the CX112B offers a rich, full bodied sound delivered by its 27.5 mm capsule. The CX112B is equipped with a bass roll-off filter to help eliminate rumble in the lower frequencies and a 10 dB pad for use in higher SPLs, up to 145 dB.
The CX112B operates on phantom power of 48 V phantom and includes a threaded metal stand adapter and a foam-lined wooden carrying case.
For optimum results, use the CX112B with a high quality mic preamplifier and microphone cable (see CBL20).
Type
Condenser
Polar Pattern
Cardioid
Frequency Response
20 Hz – 20 kHz
Impedance
120 Ohms
Sensitivity
18 mV/Pa @ 1kHz
Weight
1.00 kg
Reviews
There are no reviews yet.
Be the first to review “AUDIX CX112B Large diaphragm condenser microphone” Cancel reply
Large diaphragm condenser microphone for recording, broadcast. and live sound
The large diaphragm condenser microphone CX112B has a contemporary design and superior performance characteristics. This mic is an exceptional tool for professional audio production, project studios and live stage performances.
Delivering a smooth, uniform frequency response the CX112B offers a rich, full bodied sound delivered by its 27.5 mm capsule. The CX112B is equipped with a bass roll-off filter to help eliminate rumble in the lower frequencies and a 10 dB pad for use in higher SPLs, up to 145 dB.
The CX112B operates on phantom power of 48 V phantom and includes a threaded metal stand adapter and a foam-lined wooden carrying case.
For optimum results, use the CX112B with a high quality mic preamplifier and microphone cable (see CBL20).
Type
Condenser
Polar Pattern
Cardioid
Frequency Response
20 Hz - 20 kHz
Impedance
120 Ohms
Sensitivity
18 mV/Pa @ 1kHz
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.
Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
Large 1" (25mm) capsule with gold plated diaphragm
Cardioid polar pattern
Self noise of only 5dB (A)
Ultra low noise, transformerless surface mount circuitry
The AVANTONE CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics…but at a fraction of their cost!
The rugged CK-6 microphone body and capsule assembly are precision machined of Brass. Aesthetically the compact body features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
This Transformerless CLASS A FET Microphone w/ 32mm gold sputtered thin Mylar capsule is designed with circuitry that will yield pleasing professional results comparable to much more expensive designs. It also features -10 dB pad & 80 Hz LF roll off switches for varied recording situations.
The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
Applications
Studio vocals, acoustic guitar, mandolin, drum overheads, piano, etc…
Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8 plus one intermediate position each
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm
34/47/62 mV/Pa*
Rated impedance
50 ohms
Rated load impedance
1000 ohms
Equivalent SPL CCIR 468-3
28/25/23 dB*
Equivalent SPL DIN/IEC 651
16/13/11 dB-A*
S/N ratio CCIR 468-3
66/69/71 dB*
S/N ratio DIN/IEC 651
78/81/83 dB*
Typical SPL (tube characteristic)
K
Maximum output voltage
18 dBu
Dynamic range of the microphone amplifier cardioid DIN/IEC 651 for
101 (121) dB
Powering
Power supply N 149
Matching connectors
Microphone DIN 8F, Power supply XLR 3F
Weight
730 g
Diameter
70 mm
Length
201 mm
* Omnidirectional / cardioid / figure-8
Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone
The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.
Professional true condenser microphone for studio and live applications
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
Low-mass gold sputtered diaphragm for ultimate sound reproduction
Perfect for acoustic instruments, voice and overhead etc.
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Smooth, super-wide frequency response and incredible musicality
Switchable low-frequency roll-off and -10 dB input attenuation
Gold-plated 3-pin XLR output connector
Rugged construction with satin nickel-plated brass body
Custom microphone stand adapter, windscreen and transport case included
Manual Download
Acoustical operating principle
Pressure gradient transducer
Directional pattern
Cardioid
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm
13 mV/Pa
Rated impedance
50 ohms
Rated load impedance
1000 ohms
Equivalent noise level, CCIR1)
23 dB
Equivalent noise level, A-weighted1)
12 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL)
71 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL)
82 dB
Maximum SPL for THD
110 dB
Maximum SPL for THD
129 dB
Maximum output voltage for THD
-1 dBu
Dyn. range of the mic. amplifier /A-weighted, 0.5 %2))
98 dB
Dyn. range of the mic. amplifier /A-weighted, 5 %2))
117 dB
Supply voltage (P48, IEC 61938)
48 V ± 4 V
Current consumption (P48, IEC 61938)
3.2 mA
Matching connector
XLR 3F
Weight
825 g
Diameter
78 mm
Length
165 mm
1) According to IEC 60268-1; CCIR-weighting according to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) Measured as equivalent el. input signal
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.