AUDIX DP7 Drum Microphone Set

7-piece Drum Mic Package

The DP7 represents an outstanding combination of seven microphones designed to meet the demands of today's professional drummer, both on the stage and in the studio..

Included in the DP7 drum mic package is the D6, Audix's flagship kick drum mic, two- D2's for rack toms, one D4 for floor tom, the i5 for snare, and a pair of ADX51s for overhead miking.  Also included are four D-Vice rim mount clips for the snare and tom mics, and three heavy duty tension fit mic clips for the other three mics.     Everything is conveniently packaged in a foam-lined  aluminum road case for safe keeping when the mics are not in use.

THE MICS:

D6 - Kick Drum  
The D6 has a frequency response of 30Hz-15kHz and is characterized with a cardioid pick-up pattern. The D6 is designed to sound good in any position and it is not dependent on finding the "sweet spot" of the drum. The D6 capsule features the same legendary VLM technology that has made the D series percussion and instrument microphones very popular for today's live stages and recording studios.

i5 - Snare
The i5 has the ability to capture the rich, deep resonance of the snare along with the attack necessary to cut through the mix.   The i5's cardioid polar pattern allows it to focus on the specific instrument that is being miked while rejecting other instruments or ambient noise on stage. With a smooth and uniform frequency response of 50 Hz-16 kHz and an ability to handle sound pressure levels in excess of 140 dB, the i5 can be also used for a wide variety of instrument applications including percussion, guitar cabs, and vocals.

D2(two) - Rack Toms
For bringing out the real, dynamic sound of toms or congas, the D2 cannot be beat.  The D2 accurately reproduces the warmth and overtones of the instrument without sounding harsh or boomy.  The D2, which is very natural and articulate, requires very little (if any) EQ, and because of the tight hypercardioid polar pattern, no gating is needed.

D4 -  Floor Tom
The D4, which provides an additional octave of low end response beyond the D2, is the perfect companion for large toms and other instruments characterized with extended bass frequencies.   In fact, the D4 responds down to below 40 Hz, a remarkable feat for a microphone of the this size.  The D4 is characterized with flat linear response and can be considered the most versatile of the D-Series microphones.

• 1 D6 with DCLIP
• 1 i5 with DVICE rim mount clip
• 2 D2s with DVICE rim mount clips
• 1 D4 with rim mount clip
• 2 ADX51 with DCLIPS and windscreens
• 1 Aluminum road case

Audio Frequency Response    20 Hz - 10,000 Hz
Case Material    Die cast zinc
Connector Type    3-pin XLR
Element    Dynamic
Finish    Textured Satin Black
Impedance, Low-Z balanced    150 Ω
Mic Type    Instrumental
Open Circuit Voltage    0.63 mV/Pascal
Polar Pattern    Supercardioid
Power Requirement    Passive
Shipping Weight    23.7 oz (672 g)
Wired/Wireless    Wired
Weight Net    12.84 oz (364 g)

The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Features

• A highly consistent cardioid polar pattern
• Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
• Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
• Premium electronic components, including gold-plated internal and external connectors
• Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
• Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
• Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
• Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect

Performance Characteristics

• Extended frequency response
• Low self noise
• Exceptional reproduction of low-frequency sounds
• Can withstand high sound pressure levels (SPL)
• High output level
• No crossover distortion
• Uniform polar response
• Superior common mode rejection and suppression of radio frequency interference

APPLICATIONS

Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.

• Acoustic instruments -- such as piano, guitar, drums, percussion, strings
• Wind instruments -- brass and woodwind
• Low frequency instruments -- such as double bass, electric bass, kick drum
• Overhead miking -- drums or percussion
• Ensembles -- choral or orchestral
• Room ambiance pick-up -- guitar amplifier or drums

Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.

Suggested Applications

Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording

NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.

Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.

Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.

• Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
• Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
• Compact design reduces stage clutters
• Hardened steel mesh grille resists wear and abuse
• Neodymium magnet for high signal-to-noise ratio output
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Frequency response: 50 to 16,000 Hz

Legendary among harmonica players for its classic blues harp sound, the 520D's tradition is carried on by the 520DX "Green Bullet" and has a contoured size and shape that fits perfectly between harmonica and hands.

• New volume control knob allows musicians to adjust the volume to fit each musical situation
• New rugged, dynamic cartridge with improved response
• High-impedance, omnidirectional
• Supplied with 1/4 inch connector
• Frequency response: 100 to 5,000 Hz