Content |
The M1250B condenser microphone has a fully integrated preamp and detachable cable providing immunity from RF interference caused by cell phones and GSM devices. The M1250B is equipped with a cardioid capsule and is available with hypercardioid, omni or shotgun capsules allowing flexibility for use in live, studio and broadcast applications.
The M1250B is designed to mic acoustic instruments, overhead stages, podiums, conferences and presentations. In addition to the stock cardioid model in black, the M1250B is also available with different polar patterns and colors.
MODEL VARIATIONS:
M1250BW - With cardioid capsule (white)
M1250BHC - With hypercardioid capsule (black)
M1250BWHC - With hypercardioid capsule (white)
M1250BO -With omnidirectional capsule (black)
M1250BWO - With omnidirectional capsule (white)
M1250BS - With supercardioid (shotgun) capsule
VARIATIONS WITH THE MICROBOOM:
MB5050: 50 inch Microboom with M1250B microphone
MB5050HC: 50 inch Microboom with M1250B microphone
MB8450: 84 inch Microboom with M1250B microphone
MB8450HC 84 inch Microboom with M1250BHC microphone
VARIATIONS WITH THE MICROPOD:
MICROPOD6: 6 inch gooseneck with M1250B microphone
MICROPOD6HC: 6 inch gooseneck with M1250BHC microphone
MICROPOD12: 12 inch gooseneck with M1250B microphone
MICROPD12HC: 12 inch gooseneck with M1250BHC microphone
MICROPOD18: 18 inch gooseneck with M1250B microphone
MICROPD18HC: 18 inch gooseneck with M1250BHC microphone
Type | Condenser | Polar Pattern | Cardioid, Hypercardioid, Omni-Directional, Supercardioid | Frequency Response | 50Hz - 19kHz | Impedance | 150 Ohms | Sensitivity | @1k 10 mV/Pa (C) / 10 mV/Pa (HC) / 11 mV/Pa (O) |
|
The ME 66 is a shot gun microphone head designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments as it discriminates against sound not emanating from the main pick-up direction. Matt black, anodised, scratch-resistant finish.
Pick-up pattern : super-cardioid/lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm ( K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 221 mm
Weight : 65 g
|
Cardioid Condenser with 10dB Attenuator and 3 Position Low-Cut Filter
One of the world's great studio microphones, the SM81 provides precise, detailed sound reproduction, is excellent for studio recording, and is rugged enough for live sound reinforcement.
- A standard for acoustic instruments, including guitar and cymbals
- Selectable, low-frequency response -- either flat, 6dB/octave roll-off, or 18 dB/octave roll-off
- Built-in, switchable 10 dB attenuator for use in high SPL situations
- Phantom power only
- Windscreen included
- Low noise and high output clipping
- Cardioid condenser
- Frequency response: 20 to 20,000 Hz
| Technical specifications
Polar pattern |
cardioid |
Frequency range |
50 to 20,000 Hz |
Sensitivity |
20 mV/Pa (?34 dBV) |
Max. SPL |
125 dB (k=1 %) |
Equivalent noise level |
21 dB-A |
Signal/noise ratio (A-weighted) |
73 dB |
Impedance |
600 ohms |
Recommended load impedance |
>2000 ohms |
Supply voltage |
9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules) |
Current consumption |
|
Connector |
Discreet Acoustics Modular standard |
Finish |
matte dark gray |
Dimensions |
13.5 x 20 mm dia. (0.5 dia. x 0.8 in.) |
Net weight |
5 g (0.17 oz.) |
Shipping weight |
88 g (3.1 oz.) |
Accessories (included) |
W 30 |
|
Transformerless Power/Output Module ? The SE 300 B is used with all AKG Blue Line capsules and operates from 9 ? 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included.
Specifications
Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption: |
C 568 B
Compact, short shotgun microphone
Integrated, switchable bass cut filter minimizes mechanical noise
Operates on phantom power
High directivity and wide frequency response in a relatively short shotgun make this
microphone a perfect tool for theater, sound reinforcement, and film/TV applications.
Due to its compact and lightweight design, the C 568 B is ideal for camera mount
applications. Below 500 Hz it functions as a hypercardioid microphone; above 500 Hz
the acoustic interference tube introduces increasing directivity. A switchable 12 dB/
octave 120 Hz bass cut filter effectively suppresses rumble and wind noise. The rugged,
all-metal body contains the built-in preamp. Phantom powering (9?52 V) required; foam
windscreen and stand adapter included.
SPECIFICATIONS:
Polar pattern hypercardioid/directional
Frequency range 20 to 20,000 Hz
Sensitivity 11 mV/Pa (-39 dBV)
Max. SPL 128 dB
Equivalent noise level (CCIR 468-3) 29 dB
Equivalent noise level 18 dB-A
Signal/noise ratio 76 dB
Bass filter 12 dB/octave at 120 Hz
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption |
Reviews
There are no reviews yet.