BEHRINGER ADI21 ACOUSTIC DRIVER PEDAL

43.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Acoustic Amp Modeler/Direct Recording Preamp/DI Box Analog modeling acoustic guitar preamp/stompbox with DI recording output This BEHRINGER product has been designed to compete head to head with leading products on the market Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp Ultra-musical 3-band […]

 

Read more

Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Analog modeling acoustic guitar preamp/stompbox with DI recording output
This BEHRINGER product has been designed to compete head to head with leading products on the market
Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
Super-high impedance to retain maximum signal integrity and dynamics
Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode
Output available on ¼” TS or balanced, gold-plated XLR connectors
Ground lift switch eliminates typical ground loop problems
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Great Sound, Naturally
By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you donʼt want to use the emulation feature, the ADI21 also functions as a superb active DI box. The BLEND control allows you to mix the amount of modeled tone with your instrumentʼs normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.
EQ and More…
Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4” TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).
Value
Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. Try the V-TONE ACOUSTIC ADI21 at your local BEHRINGER dealer and find out just how affordable great acoustic sound can be.

 
  User’s Manual

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “BEHRINGER ADI21 ACOUSTIC DRIVER PEDAL”

Your email address will not be published. Required fields are marked *

Quick Comparison

BEHRINGER ADI21 ACOUSTIC DRIVER PEDAL removeVOX SNAKE CHARMER COMPRESSOR PEDAL removeBEHRINGER HB01 HELL-BABE WAH pedal removeDIGITECH XHP 7-MODE PHASER removeBOSS PH-3 PHASE SHIFTER Pedal removeBOSS CEB-3 Bass Chorus Pedal remove
NameBEHRINGER ADI21 ACOUSTIC DRIVER PEDAL removeVOX SNAKE CHARMER COMPRESSOR PEDAL removeBEHRINGER HB01 HELL-BABE WAH pedal removeDIGITECH XHP 7-MODE PHASER removeBOSS PH-3 PHASE SHIFTER Pedal removeBOSS CEB-3 Bass Chorus Pedal remove
Image
SKUE005219VOX SNAKE CHARMERE005300XHP690.ROL.101690.ROL.305
Rating
Price 43.00 incl. GR VAT 87.01 incl. GR VAT 68.00 incl. GR VAT 52.00 incl. GR VAT161.08 incl. GR VAT137.63 incl. GR VAT
Stock

In stock

In stock

Only 2 left in stock (can be backordered)

In stock

Available on backorder

Available on backorder

AvailabilityIn stockIn stockOnly 2 left in stock (can be backordered)In stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Descriptionhttps://youtu.be/81eXvxy6_No
Content

Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Analog modeling acoustic guitar preamp/stompbox with DI recording output
This BEHRINGER product has been designed to compete head to head with leading products on the market
Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
Super-high impedance to retain maximum signal integrity and dynamics
Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode
Output available on ¼'' TS or balanced, gold-plated XLR connectors
Ground lift switch eliminates typical ground loop problems
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Great Sound, Naturally
By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you donʼt want to use the emulation feature, the ADI21 also functions as a superb active DI box. The BLEND control allows you to mix the amount of modeled tone with your instrumentʼs normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.
EQ and More…
Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4” TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).
Value
Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. Try the V-TONE ACOUSTIC ADI21 at your local BEHRINGER dealer and find out just how affordable great acoustic sound can be.

 
  User's Manual

Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.

Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.

  • Snake Charmer Compressor CT05
    • Connection: Input: x1 (guitar input), Output: x1 (line output)
    • Input / Output Impedance: 830 k-ohm / 4 k-ohm
    • Tube: 12AU7 (ECC82)
    • Power Supply: Four AA alkaline batteries or DC9V AC adapter
    • Battery Life: Approx. 18 hours
    • Current Consumption: 95 mA
    • Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
    • Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
    • Included Items: Four AA alkaline batteries

 

Wah-Wah Pedal HB-01 hell-babe
HELLBABE HB01
HELLBABE HB01
The HELL-BABE HB01 is unlike any wah you’ve ever stepped on, offering a tremendous array of tone-sculpting options. You get everything from “old-school” wah to the most up-to-date sounds, all in one mesmerizing effects pedal. Add to that optical control that does away with noisy pots, an adjustable spring mechanism and tunable boost, and this babe’s a contender! The HELL-BABE will add new dimension and depth to your artistic expression.
What’s So Great About the HELL-BABE?
First of all, the HB01’s heel-down Range control provides low frequency adjustment that can be swept from 440 Hz down to 250 Hz, making the HB01 the ideal companion for either guitar or bass. For custom-tailoring the toe-down frequency range, the HELL-BABE features a Fine control, allowing you to adjust the frequency sweep as high as 2.2 kHz.
Volume Boost
You can even dial in a powerful volume Boost (up to +15 dB), so that when you do step on the HB01, your guitar will rise to the top of the mix. A highly versatile Q control is provided for precise filter shaping and for achieving vocal-like effects.
   

The Digitech XHP HYPER PHASE Guitar Effect Stomp Box Pedal. Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds.

The Digitech XHP Hyper Phase delivers 7 operational modes, instead of the typical one mode only that you find in some other pedals. These operational modes are easily selectable using the mode control allowing you to choose from a selection of awesome voicing sounds, triggering feature, and useful step functions. Now you are no longer limited to a one-trick pedal. You can dial in the exact phaser or flanger sound you want! The Hyper Phase has Speed, Depth, Regen, and Mode controls. Outputs for both pedals include Out 1 (Mono) and Out 2 for stereo operation.

The main features of the Digitech XHP HYPER PHASE include:

  • Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds
  • 7 Different phase types
  • Speed, Depth, Regen, and Mode controls
  • Triggering and step capability
  • Stereo outputs with switchable CIT Cabinet Modeling

Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.

 

Nominal Input Level-20 dBu
Input Impedance1 M ohms
Nominal Output Level-20 dBu
Output Impedance1 k ohms
Recommended Load Impedance10 k ohms or greater
Residual Noise Level-92 dBu (IHF-A, Typ.)
ConnectorsINPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V)
Power Supply DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor
Current Draw50 mA (DC 9 V)
AccessoriesDry Battery 9 V type (6F22/9 V)
Options AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U)
Size and Weight ( incl. battery )
Width
73 mm2-7/8 inches
Depth
129 mm5-1/8 inches
Height
59 mm2-3/8 inches
Weight
420 g0 lbs. 15 oz.

 

 

The CEB-3 Bass Chorus pedal offers a split-frequency chorus effect capable of applying warm, rich chorusing to the higher frequencies without muddying up the lows. It's the perfect chorus pedal for bassists.

  • Compact chorus pedal especially designed for bass guitar
  • Applies chorus sound to the high frequencies without altering low frequencies
  • Effect Level, Low Filter, Rate and Depth knobs permit precise tonal shaping
  • BOSS 5-year warranty
Weight0.50 kg1.00 kg1.50 kg1.00 kg0.42 kg1.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 1.00 kg
Weight 1.50 kg
Weight 1.00 kg
Weight 0.42 kg
Weight 1.40 kg