Content |
Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Analog modeling acoustic guitar preamp/stompbox with DI recording output
This BEHRINGER product has been designed to compete head to head with leading products on the market
Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
Super-high impedance to retain maximum signal integrity and dynamics
Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode
Output available on ¼'' TS or balanced, gold-plated XLR connectors
Ground lift switch eliminates typical ground loop problems
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Great Sound, Naturally
By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you donʼt want to use the emulation feature, the ADI21 also functions as a superb active DI box. The BLEND control allows you to mix the amount of modeled tone with your instrumentʼs normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.
EQ and More…
Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4” TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).
Value
Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. Try the V-TONE ACOUSTIC ADI21 at your local BEHRINGER dealer and find out just how affordable great acoustic sound can be.
User's Manual
| All-Time Favorite Chorus Effects, Modeled in a Single X-Series Pedal
Introducing the DigiTech CF-7 Chorus Factory. Think of it as 1-stomp shopping for all of your ultra high quality chorus needs. Besides Speed and Depth knobs, they've included a 2-in-1 concentric control that lets you tweak 2 more key parameters of each chorus effect. Add Flexible Output Mode, cast metal treadle and sleek carbon fiber finish and you have an industrial strength creative tool. If one of the best classic choruses with added control begs to be a part of your sound, you've just found the perfect pedal.
Features:
7 classic chorus effects models
Speed, depth and 2 parameter controls for each effect
Flexible output mode -- configure outputs for amp or mixer
CIT models classic speaker cabinets
Cast-metal treadle and chassis
Unique carbon-fiber look
Non-skid rubber base
Based on the Boss CH-1*
Based on the EH Small Clone*
Based on the DigiTech Multi Chorus
DigiTech, X-Series, Flexible Output Mode, DigiTech Whammy, Multi Chorus, CIT and CF-7 Chorus Factory are trademarks of Harman International Industries, Inc. |
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
|
The MD-2 Mega distortion takes the bottom-heavy distortion sounds heard in today's new-school metal and pushes it to the extreme. The secret is a special dual-stage distortion circuit with an added gain boost-plus new Bottom and Tone controls--for crushing distortion with massive low end. Take your distortion into the future with the MD-2.
- Produces extreme, low-end distortion for modern metal and hard rock
- Gain Boost circuit creates huge distortion and sustain regardless of level
- New Bottom control for bottom-heavy distortion matched to 6- or 7-string guitars
- Tone control adjusts balance between high and low frequencies
- BOSS 5-year warranty
| The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
| Studio Quality Effects at Your Feet
Premier recording studios worldwide use Eventide on hit after hit. ModFactor features Eventide's 27 best modulation effects without compromising quality OR flexibility.
Flexibility Built-In
Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals.
Obsolescence is so 20th Century
Easy to upgrade; download new software from the Internet and install via USB.
Features
- 27 of Eventideʼs signature stereo or mono effects:
- Liquid Chorus
- Shimmer Chorus
- Organic Chorus
- Negative Phaser
- Postive Phaser
- BiPhase Phaser
- Feedback Phaser
- WahWah Q-Wah
- Voc-Wah Q-Wah
- Positive Flanger
- Negative Flanger
- Jet Flanger
- Thru-o Flanger
- Lowpass ModFilter
- HiPass ModFilter
- BandPass ModFilter
- Standard Rotary
- Giant Rotary
- Bias Tremolo
- Opto Tremolo
- Modern Vibrato
- Vintage Vibrato
- Retro Vibrato
- Pitch Undulator
- Feedback Undulator
- Ring (DC) Ringmod
- String (AC) Ringmod
- Studio quality sound
- Software upgradeable via USB 2.0
- MIDI control via USB or MIDI in, out/thru
- Instant program change
- Real-time control with 10 knobs, MIDI, or expression pedal
- Tap tempo and MIDI clock sync
- 40 factory presets, unlimited through MIDI
- True analog bypass
- Rugged cast metal construction
- Reliable metal footswitches for instant preset access
- Mono or stereo operation
- Guitar or line level inputs and outputs
SPECIFICATIONS:
Analog Input/Output |
Input impedance |
500K ohms |
Output Impedance |
470 ohms |
Recommended Load Impedance |
10K ohms or greater |
Connectors |
Input 1 (mono) |
¼ inch mono phone jack |
Input 2 |
¼ inch mono phone jack |
Output 1 (mono) |
¼ inch mono phone jack |
Output 2 |
¼ inch mono phone jack |
Expression Pedal |
¼ inch mono phone jack |
Aux Switch |
¼ inch stereo phone jack |
USB |
Type B Socket. Use 2.0 cables only. |
MIDI In |
Five pin DIN (Female) |
MIDI Out/Thru |
Five pin DIN (Female) |
AC Adapter Jack |
Power Supply included (see below) |
Physical |
Power |
9 VDC, 1200 mA, Tip hot (+) |
Dimensions |
English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm |
Weight |
2.15 lbs, 1kG |
|
Reviews
There are no reviews yet.