Acoustic Amp Modeler/Direct Recording Preamp/DI Box Analog modeling acoustic guitar preamp/stompbox with DI recording output This BEHRINGER product has been designed to compete head to head with leading products on the market Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp Ultra-musical 3-band […]
Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Analog modeling acoustic guitar preamp/stompbox with DI recording output
This BEHRINGER product has been designed to compete head to head with leading products on the market
Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
Super-high impedance to retain maximum signal integrity and dynamics
Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode
Output available on ¼” TS or balanced, gold-plated XLR connectors
Ground lift switch eliminates typical ground loop problems
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Great Sound, Naturally
By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you donʼt want to use the emulation feature, the ADI21 also functions as a superb active DI box. The BLEND control allows you to mix the amount of modeled tone with your instrumentʼs normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.
EQ and More…
Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4” TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).
Value
Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. Try the V-TONE ACOUSTIC ADI21 at your local BEHRINGER dealer and find out just how affordable great acoustic sound can be.
User’s Manual
Weight
0.50 kg
Reviews
There are no reviews yet.
Be the first to review “BEHRINGER ADI21 ACOUSTIC DRIVER PEDAL” Cancel reply
Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Analog modeling acoustic guitar preamp/stompbox with DI recording output
This BEHRINGER product has been designed to compete head to head with leading products on the market
Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
Super-high impedance to retain maximum signal integrity and dynamics
Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode
Output available on ¼'' TS or balanced, gold-plated XLR connectors
Ground lift switch eliminates typical ground loop problems
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Great Sound, Naturally
By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you donʼt want to use the emulation feature, the ADI21 also functions as a superb active DI box. The BLEND control allows you to mix the amount of modeled tone with your instrumentʼs normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.
EQ and More…
Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4” TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).
Value
Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. Try the V-TONE ACOUSTIC ADI21 at your local BEHRINGER dealer and find out just how affordable great acoustic sound can be.
User's Manual
Studio Quality Effects at Your Feet
Premier recording studios worldwide use Eventide on hit after hit. ModFactor features Eventide's 27 best modulation effects without compromising quality OR flexibility.
Flexibility Built-In
Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals.
Obsolescence is so 20th Century
Easy to upgrade; download new software from the Internet and install via USB.
Features
27 of Eventideʼs signature stereo or mono effects:
Liquid Chorus
Shimmer Chorus
Organic Chorus
Negative Phaser
Postive Phaser
BiPhase Phaser
Feedback Phaser
WahWah Q-Wah
Voc-Wah Q-Wah
Positive Flanger
Negative Flanger
Jet Flanger
Thru-o Flanger
Lowpass ModFilter
HiPass ModFilter
BandPass ModFilter
Standard Rotary
Giant Rotary
Bias Tremolo
Opto Tremolo
Modern Vibrato
Vintage Vibrato
Retro Vibrato
Pitch Undulator
Feedback Undulator
Ring (DC) Ringmod
String (AC) Ringmod
Studio quality sound
Software upgradeable via USB 2.0
MIDI control via USB or MIDI in, out/thru
Instant program change
Real-time control with 10 knobs, MIDI, or expression pedal
Tap tempo and MIDI clock sync
40 factory presets, unlimited through MIDI
True analog bypass
Rugged cast metal construction
Reliable metal footswitches for instant preset access
Mono or stereo operation
Guitar or line level inputs and outputs
SPECIFICATIONS:
Analog Input/Output
Input impedance
500K ohms
Output Impedance
470 ohms
Recommended Load Impedance
10K ohms or greater
Connectors
Input 1 (mono)
¼ inch mono phone jack
Input 2
¼ inch mono phone jack
Output 1 (mono)
¼ inch mono phone jack
Output 2
¼ inch mono phone jack
Expression Pedal
¼ inch mono phone jack
Aux Switch
¼ inch stereo phone jack
USB
Type B Socket. Use 2.0 cables only.
MIDI In
Five pin DIN (Female)
MIDI Out/Thru
Five pin DIN (Female)
AC Adapter Jack
Power Supply included (see below)
Physical
Power
9 VDC, 1200 mA, Tip hot (+)
Dimensions
English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm
Weight
2.15 lbs, 1kG
Product Features:
Shape your sound and eliminate feedback with 7 bands of equalization
This BEHRINGER product has been designed to compete head to head with leading products on the market
Wide frequency range from 50 Hz to 10 kHz with a powerful 15 dB boost/cut per band
Status LED for effect on/off and battery check
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
First-class electronic On/Off switch for noise-free operation
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
How the specific frequency bands of the BEQ700 can shape your sound
50 Hz (sub-bass)
Boost: To thicken up sub-bass content, which is mostly felt rather than heard
Cut: To eliminate stage "rumble” and sub-bass content that can rob sound system power
120 Hz (soft bass)
Boost: To enhance the lower end of the bass spectrum
Cut: To reduce the tendency of low frequency content to overwhelm a small room
400 Hz (hard bass)
Boost: To enhance the "hard” bass punch of fundamental tones
Cut: To reduce punch for better linkage with the kick drum
500 Hz
Boost: or Cut: To control bass clarity and warmth
800 Hz
Boost: To add an aggressive edge to the overall bass sound
Cut: For reducing somewhat nasal or horn-like content
4.5 kHz
Boost: To make the bass cut through the mix. Creates a more distinctive plucked tone
Cut: To eliminate harshness
10 kHz
Boost: To bring out the upper harmonics and add edge to the overall bass tonality
Cut: Apply a cut to reduce harsh high-frequency content or hiss
User's Manual
The MD-2 Mega distortion takes the bottom-heavy distortion sounds heard in today's new-school metal and pushes it to the extreme. The secret is a special dual-stage distortion circuit with an added gain boost-plus new Bottom and Tone controls--for crushing distortion with massive low end. Take your distortion into the future with the MD-2.
Produces extreme, low-end distortion for modern metal and hard rock
Gain Boost circuit creates huge distortion and sustain regardless of level
New Bottom control for bottom-heavy distortion matched to 6- or 7-string guitars
Tone control adjusts balance between high and low frequencies
BOSS 5-year warranty
All-Time Favorite Chorus Effects, Modeled in a Single X-Series Pedal
Introducing the DigiTech CF-7 Chorus Factory. Think of it as 1-stomp shopping for all of your ultra high quality chorus needs. Besides Speed and Depth knobs, they've included a 2-in-1 concentric control that lets you tweak 2 more key parameters of each chorus effect. Add Flexible Output Mode, cast metal treadle and sleek carbon fiber finish and you have an industrial strength creative tool. If one of the best classic choruses with added control begs to be a part of your sound, you've just found the perfect pedal.
Features:
7 classic chorus effects models
Speed, depth and 2 parameter controls for each effect
Flexible output mode -- configure outputs for amp or mixer
CIT models classic speaker cabinets
Cast-metal treadle and chassis
Unique carbon-fiber look
Non-skid rubber base
Based on the Boss CH-1*
Based on the EH Small Clone*
Based on the DigiTech Multi Chorus
DigiTech, X-Series, Flexible Output Mode, DigiTech Whammy, Multi Chorus, CIT and CF-7 Chorus Factory are trademarks of Harman International Industries, Inc.
Studio Quality Effects at Your Feet
Top recording studios worldwide use Eventide effects on hit after hit. TimeFactor includes Eventide's best delay effects from the past 36 years without compromising quality OR flexibility.
Flexibility Built-In
Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals.
Obsolescence is so 20th Century
Easy to upgrade; download new software from the Internet and install via USB.
Features
10 Stereo or Mono Delay effects
Digital Delay
Vintage Delay
Tape Echo
Mod Delay
Ducked Delay
Band Delay
Filter Pong
MultiTap
Reverse
Looper
Studio Quality Sound
Instant Program Change
Real-time control with 10 knobs, MIDI or expression pedal
Tap Tempo and MIDI Clock Sync
40 User Presets, unlimited through MIDI
True Analog Bypass
Rugged cast metal construction
Metal footswitches for instant Preset access
Mono or Stereo operation
Guitar or Line Level Inputs and Outputs
SPECIFICATIONS:
Analog Input/Output
Input impedance
500K ohms
Output Impedance
470 ohms
Recommended Load Impedance
10K ohms or greater
Connectors
Input 1 (mono)
¼ inch mono phone jack
Input 2
¼ inch mono phone jack
Output 1 (mono)
¼ inch mono phone jack
Output 2
¼ inch mono phone jack
Expression Pedal
¼ inch mono phone jack
Aux Switch
¼ inch stereo phone jack
USB
Type B Socket. Use 2.0 cables only.
MIDI In
Five pin DIN (Female)
MIDI Out/Thru
Five pin DIN (Female)
AC Adapter Jack
Power Supply included (see below)
Physical
Power
9 VDC, 1200 mA, Tip hot (+)
Dimensions
English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.