| Content | STUDIO CONDENSER MICROPHONE C-1U
Studio Condenser Microphone with USB Audio Interface and software suite
Professional, large-diaphragm condenser microphone with built-in USB interface, ideal for podcasters and musicians
Plug this amazing USB-mic straight into your computer and turn your PC or Mac computer into a recording system without the need for any other hardware
Directly works with your PC or Mac computer—ultra-low latency ASIO and WDM drivers for PC audio optimization included
Exceptionally flat frequency response and ultra-high sound resolution perfect for voice, acoustic instruments, etc.
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Pressure-gradient transducer with shock-mounted capsule
- Professional large-diaphragm condenser microphone with built-in 48 kHz USB interface for unsurpassed audio quality
- Gets phantom power directly from PC USB output
- Comes with Audacity audio editor, Kristal audio engine, Podifier uploading software, and Juice and Podnova downloading software
- Maximum SPL (sound pressure level) of 136 dB
- Ideal as main and support microphone for studio and live applications
- Exceptionally flat frequency response and ultra-high sound resolution
- Cardioid pickup pattern for outstanding sound source separation and feedback rejection
- Ultra low-noise transformerless FET input circuitry
- LED indicates phantom power operation
- Ultra-rugged construction with die-cast body
- USB connector and swivel stand mount included
|
- Element: Back electret condenser
- Element diameter: 14mm
- Frequency response: 20–17,000Hz
- Sensitivity: -34dB ± 2dB (0dB = 1V/Pa @ 1kHz)
- Output: USB
- A-D converter: 48kHz / 16-bit sampling rate
- Output impedance: 100Ω ± 30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max. SPL: 132dB (at 1kHz <1% THD)
- Signal to Noise ratio: 78dB
Microphone, USB Cable, Mic Clip
| Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power.
Specifications
Polar Pattern: cardioid
Frequency Response: 20?20.000 Hz
Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa
Max. SPL for 1% / 3% THD: 126/130 dB SPL
Equivalent Noise Level: 33 dB to DIN 45 412
Electrical Impedance: 200 ohms
Recommended Load Impedance: >2.000 ohms
Power Requirement: 9 to 52 volts universal phantom power
Current Consumption: approx. 2 mA
Connector : 3-pin XLR
Cable Length: 1.5 m (5 ft.)
Finish: matte black
Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.)
Net / Shipping Weight: 23/192 g (0.8/6,8 oz.)
Optional Accessorires: B15, B18 |
Transformerless Power/Output Module ? The SE 300 B is used with all AKG Blue Line capsules and operates from 9 ? 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included.
Specifications
Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption: | The Pod Pack 1 is a professional upgrade to any announce studio. The kit consists of a high-quality USB condenser microphone paired with a fully-adjustable suspension boom arm, keeping the desk clear and the microphone always in position for podcasting, on-air or voice-over applications. Assembly is a snap and the articulating boom clamps securely to nearly any desk or table surface.
- Included USB cardioid condenser microphone
- All-steel construction
- Dual suspension springs for stable angle
- Fully adjustable - microphone can even be suspended upside-down
- Clamps to nearly any desk or table
- USB cable included
- Microphone
- Element: Back electret condenser
- Element Diameter: 13mm
- Polar pattern: Cardioid
- Frequency response: 20 - 17,000 Hz
- Sensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)
- Output impedance: 100Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max SPL: 132dB (@ 1kHz
- Signal to Noise ratio: 78dB
Broadcast Boom Arm
- Adjustable height and angle
- Telescoping range: 15.75" - 27.5" (40cm - 70cm)
- Weight: 13.5oz (382g)
| This new mic is a performance / price breakthrough. It has an acoustically identical version of the legendary CK1 capsule that is permanently mounted. This combination can handle high output transients as well as subtle harmonics. Also included are switchable 75 and 150Hz 12dB per octave rolloff, and switchable -10 & -20 dB input pad. It is a single pattern (cardioid), and has a frequency response of 20 to 20kHz with 135 dB SPL. Requires 12 to 48V phantom power. Kit comes with bag, windscreen and clip.
For more than twenty years, the AKG C 451 with the CK 1 condenser capsule was a standard item on tour riders for sound companies and required by leading engineers for studio projects. When it was discontinued in 1993, there was still a big demand for this microphone. AKG now has an updated version of this classic microphone.
The new C 451B provides the same frequency response as the legendary CK 1 with the same slight high-end rise that was the signature of the original. This characteristic makes the C 451B an ideal tool for capturing signals rich in transients such as acoustic guitars, snare drums, hi-hats and for overhead micing of drum kits. The C 451B?s response eliminates the need for heavy EQ on these instruments.
The new C 451B has also benefited from newer electronic technology with machine soldering and surface-mount components that improve noise performance and make the microphone much more reliable than the original.
Other special features include switchable 10 dB and 20 dB preattenuation pads and switchable low cut filters at 75 Hz or 150 Hz. Standard accessories included are an SA 40 stand adaptor, W 90 windscreen and a rugged zippered bag. Each C 451B also comes with an individual frequency response printout.
Three-year warranty.
Specification
Polar pattern: cardioid
Frequency range: 20?20,000 Hz
Sensitivity: 9 mV/Pa (-41 dBV re 1 V/Pa)
Max. SPL for 0.5 % THD: 135/145/155 dB SPL (-0/-10/-20 dB)
Equivalent noise level: 18 dB-A to DIN 45 412
Signal/noise ratio (A-weighted): 76 dB
Preattenuation pad: switchable, 0, -10,-20 dB Bass cut filter: switchable to flat or 12 dB/octave at 75 Hz or 150 Hz
Electrical impedance: Recommended load impedance: >1.000 Ohms
Power requirement: 9?52 Volt phantom power to DIN 45 596/IEC 268-15
Current consumption: Connector: 3-pin male XLR
Finish: satin nickel plated
Size: dia.: 190 mm (0.7 in.); length: 160 mm (6.3 in.)
Net/shipping weight: 125/760 g (4.4 oz./1.7 lbs.)
Standard accessories: W 90 windscreen, SA 40 stand adapter |
Reviews
There are no reviews yet.