BEHRINGER CT-100 CABLE TESTER

32.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Tests XLR, 1/4 in., 1/8 in., TT, RCA and MIDI connectors. The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone (1/4 in., 1/8 in., TT), RCA and MIDI. It shows which input pin is connected to which output pin. Separate LEDs indicate proper shield connection and phantom power presence. The […]

 

Read more

Tests XLR, 1/4 in., 1/8 in., TT, RCA and MIDI connectors.

The intelligent, CPU-controlled CT100 accepts virtually any connector type:
XLR, mono and TRS phone (1/4 in., 1/8 in., TT), RCA and MIDI. It shows
which input pin is connected to which output pin. Separate LEDs indicate
proper shield connection and phantom power presence. The CT100 also
offers an installed cable test mode and a continuity check plus a test tone
generator.

Features
3 modes: cable test mode, installed cable test mode, and test tone mode
Accepts XLR, mono and stereo TRS phone (1/4 in., 1/8 in., TT),
RCA and MIDI Connectors
Continuity check
Intermittent detect
Phantom power detect
Grounded shield detect
Test tone generation (1 kHz and 440 Hz)
Battery operation (requires 2 AA alkaline batteries)

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “BEHRINGER CT-100 CABLE TESTER”

Your email address will not be published. Required fields are marked *

Quick Comparison

BEHRINGER CT-100 CABLE TESTER removePALMER AUDIO PAN04 PMBL TOOLS Line level Mergebox removeNT-INSTRUMENTS MINIRATOR MR2 ANALOG AUDIO GENERATOR removeDIGITAL SOUND 8928 Sound dB meter removeARTLIGHT ZK-YK1028 Non Contact Infrared Thermometer removePALMER AUDIO AHMCTDMX Pro 3-pin and 5-pin DMX and XLR cable tester remove
NameBEHRINGER CT-100 CABLE TESTER removePALMER AUDIO PAN04 PMBL TOOLS Line level Mergebox removeNT-INSTRUMENTS MINIRATOR MR2 ANALOG AUDIO GENERATOR removeDIGITAL SOUND 8928 Sound dB meter removeARTLIGHT ZK-YK1028 Non Contact Infrared Thermometer removePALMER AUDIO AHMCTDMX Pro 3-pin and 5-pin DMX and XLR cable tester remove
Imagezk yk1028 non contact infrared thermometer
SKUE005950PMBLMINIRATOR8928ZK_YK1028AHMCTDMX
Rating
Price 32.00 incl. GR VAT 227.94 incl. GR VAT 468.72 incl. GR VAT93.00 incl. GR VAT 11.77 incl. GR VAT 29.08 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 5 left in stock

In stock

Only 1 left in stock

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderOnly 5 left in stockIn stockOnly 1 left in stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentTests XLR, 1/4 in., 1/8 in., TT, RCA and MIDI connectors. The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone (1/4 in., 1/8 in., TT), RCA and MIDI. It shows which input pin is connected to which output pin. Separate LEDs indicate proper shield connection and phantom power presence. The CT100 also offers an installed cable test mode and a continuity check plus a test tone generator. Features 3 modes: cable test mode, installed cable test mode, and test tone mode Accepts XLR, mono and stereo TRS phone (1/4 in., 1/8 in., TT), RCA and MIDI Connectors Continuity check Intermittent detect Phantom power detect Grounded shield detect Test tone generation (1 kHz and 440 Hz) Battery operation (requires 2 AA alkaline batteries)

The PMBL is a 2 channel passive line level merge box. Each channel has 2 balanced XLR/f inputs. The input signal is merged via a resistor network to a XLR/m output.The top side input is transformer isolated. Possible applications might be the routing of two mixing desks to one power amp or mixing a stereo signal down to mono. Our transformer technology allows for an unbalanced top side input to be sent out balanced. 

Specifications:

  • Each Channel: Input 1 transformer balanced XLR/f. Symmetrically decoupled through resistors
  • Total ohmic value: 2 K Maximum level for THD

Minirator MR1 is the powerful analog audio generator providing a comprehensive
set of analog audio test signals required in a professional audio environment.
This handy audio generator enables you to stimulate any analog device with a
broad range of appropriate signals like sine wave, pink noise, white noise,
sweeps and many others, for performance checking, maintenance and repairs.
Convenient, reliable and optimized - Minirator fits into your pocket as well as in
your budget.
 
Product-details
Signals:
? Sine Wave
? Square Wave
? Frequency Sweep
? White Noise
? Pink Noise
? Polarity Test Signal

Features:
? 20Hz to 20kHz, adjustable
  in 1/3rd octave steps
? Level adjustable
? Low distortion

Digital Sound 8928 SPL Meter with Built-In Measurement Mic - calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery. A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.
  • 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
  • 0.1dB resolution updated every 0.5 seconds
  • Auto ranging or manual range selection
  • ʽAʼ & ʽCʼ frequency weighting
  • Fast or slow response filters
  • 42mm LCD display with quasi-analogue bargraph and function Indicators
  • Bargraph in 1dB steps updated every 40ms
  • Max hold function to display the highest recorded value
  • Min/max memory since power on or last reset
  • Low battery indicator
  • Auto power off
  • Analogue output AC: 0.707 Vrms (at full scale)
  • Supplied with battery
Overview: This is an infrared digital forehead thermometer with high precision, which is hand-held and portable for easy use. Non-contact design reduces cross infection effectively, widely used for measuring body temperature. Features: High precision infrared sensor, stable and reliable, for safe use, ensures accurate measuring, small error. Alarm temperature can be set and once exceeded, it will give out a beep sound. Also, it supports the Mute mode. Humanized design, LCD screen display with high brightness backlight can clearly show the body temperature. Aim at the forehead (3-5cm), press the measuring button, and the LCD display will show the currently measured temperature. Automatic store 32 sets of measurement data, you can view the data of the previous measurement. Short press the Function Setting button to switch between Body and Object temperature modes. Compact design, lightweight and portable, comfortable grip handle, easy to carry, convenient to use. Suitable for baby, kids, and adult use and can be widely used in school, office, and at home, etc. Note: The battery is not included. Specification: Model: ZK-YK1028 Measuring Method: Non-Contact Measuring Distance: 3cm-5cm Unit of Measurement: Celsius(℃), Fahrenheit(°F) Measuring Range: 32℃-42.9℃ (89.6°F-109.2°F) Max. Allowable Error: ±0.3℃ within range 35℃-42℃ Display Resolution: 0.1℃/0.1°F Operating Environment: 16℃-35℃ (60.8°F-95°F), Humidity≤85% Transportation Storage Environment: -20℃-50℃ (-4°F-131°F), Humidity ≤90% Power: DC 3V (2 AAA Batteries Not Included) Backlight: Highlight Backlight Automatic Shut-down: 30s Item Size: 15.0 * 8.5 * 4.3cm / 5.90 * 3.34 * 1.69in Item Weight: 105g / 3.70oz Package Size: 17.0 * 10.5 * 4.8cm / 6.69 * 4.13 * 1.89in Package Weight: 156g / 5.50oz Package List: 1 * Thermometer 1 * User Manual (English)

Palmer Pro MCT DMX 3-pin and 5-pin DMX and XLR cable tester MCT DMX This cable tester checks 3-pin and 5-pin DMX cables for continuity in fully automatic or manual pin selection modes. Pin connection status of the male and female cable ends is indicated by two rows of bright LEDs. In addition, the unitʼs 3-pin connectors can also be used to test XLR microphone cables. The DMX Cable Tester comes with two L-brackets for variable mounting options.

 

  • Tests 3-pin and 5-pin DMX cables for continuity
  • Also tests 3-pin XLR microphone cables
  • Automatic test mode or manual pin 1 - 5 selection
  • LED indicators
  • Mounting brackets included

 

Product type Test Equipment
Connectors XLR (3-pin) , XLR (5-pin)
Controls Auto Scan , On / Off , Scan switch
Indicators LED chain
Operating voltage 2 x AA battery
Acoustic continuity test no
Test cable no
Cabinet material sheet steel
Cabinet surface powder coated
Width 240.2 mm
Height 48 mm
Depth 53 mm
Weight 0,7 kg

 

Weight1.00 kg0.65 kg0.17 kg0.50 kg0.6 kg0.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.65 kg
Weight 0.17 kg
Weight 0.50 kg
Weight 0.6 kg
Weight 0.80 kg