| Content |
- Compact 9.5" graphic equaliser for studio and live applications
- FBQ feedback detection system
- Can also be used as an audio analyser
- Low-cut filter
- Precise 6-segment LED input/output displays and level control for precise level indication
- Illuminated faders, potentiometers and illuminated switches
- Weight: 0.38 kg
The MINIFBQ FBQ800 features Behringer's FBQ Feedback Detection System that instantly reveals critical frequencies and can also be used as an audio analyzer. An additional low cut filter removes unwanted frequencies such as floor rumble. Accurate 6-digit LED input/output meters and level control are provided for precise level indication. Long-term reliability is guaranteed with Behringer's high-quality illuminated faders, potentiometer and illuminated switches. The ultralow noise audio operational amplifiers offer outstanding sound performance. In addition, all Mini Series models can be stacked on top of each other to create an ultra-compact signal processing solution.
How Does it Work?
Imagine the frequency range of the sound you hear as a highway, a very wide one with nine lanes. Each of these "lanes” represents a single octave of the sonic spectrum. The first four lanes, labeled 63 - 500 (Hz) contain the really low frequency sound content, mainly bass, bass vocals, and the kick and tom drums. The three lanes labeled 1k, 2k and 4k (Hz), make up the fundamental zone of most musical instruments and the male and female vocals. 8k and 16k cover the frequency range of cymbals, snare drums and higher pitched percussion instruments. The FBQ800 allows you to control the flow of audio traffic in each of these nine lanes. When properly applied, EQ makes it possible to hear all of these frequency ranges equally, thus the term equalization.
Feedback Elimination
When a specific frequency, or range of frequencies, reaches too high a level, feedback occurs—that all-too-familiar squeal or howl you get when the mic is too close to the speaker. Basically, feedback happens when there is so much of a particular frequency that it is picked up by the mic and run through the system again. Thatʼs why feedback typically gets louder and louder the longer itʼs allowed to occur. Needless to say, this kind of feedback is very undesirable.
This is where the FBQ800ʼs Feedback Detection System really works its magic. In this ingenious circuitry, LEDs on the individual faders light up when that frequency band is approaching the danger zone. All you need do is lower the illuminated slider until the LED blinks out—voilà, feedback problem solved! What once required a highly trained ear is now an activity that even a child can master.
Sonic Toolkit…
That really is the best way to describe the FBQ800. With its nine frequency bands, you easily fine-tune your sound and instantly eliminate feedback. And each fader can be used to boost or cut the frequency range it controls by as much as 12 dB (and thatʼs a lot!).
Special attention is paid to the low frequency zone. In addition to low frequency faders, the FBQ800 features a Low Cut filter for removing unwanted low frequencies such as floor rumble, room resonance, electrical hum, etc. This is especially handy if your system is being used for speech rather than music.
To Boost or to Cut, That is the Question
Raising and lowering specific frequency bands can improve the frequency response of any roomʼs acoustics. For instance, if the room youʼre in is "bass-heavy,” lowering the 63 and 125Hz faders can help eliminate an overall "boomy” or "muddy” sound. Likewise, gently boosting the 8 and 16k sliders can add sparkle to a somewhat "dark” mix. Are the vocals getting lost in the mix? Raising the level of the 1k slider can help bring them out.
Itʼs important to note that raising a single fader level is not always the best solution; itʼs often better to lower the bands surrounding the frequency you want to bring out, and then boost the overall volume level to achieve better headroom.
Built for Accuracy and Reliability
Speaking of headroom, FBQ800ʼs 6-digit LED I/O meters and level control are provided for precise level maintenance. Long-term reliability is ensured, thanks to high-quality illuminated faders and switches, and our ultra low-noise audio operational amplifiers provide outstanding sonic performance. In addition, all Mini Series components can be stacked to create an ultra-compact signal processing solution.
Mini Series mixer with built-in feedback detection.
FEATURES
- Ultra-compact 9.5" graphic equalizer for studio and stage applications
- FBQ Feedback Detection system instantly reveals critical frequencies
- Additional Low-cut filter removes unwanted frequencies, like floor rumble
- 6-segment LED input/output meters and Level control for precise level indication
- High-quality illuminated faders, potentiometers and illuminated switches
- Low noise audio operational amplifiers offer excellent sound performance
SPECIFICATIONS
MINIFBQ FBQ800 9-Band Graphic Equalizer with FBQ
- INPUT
- Type 1/4" TRS connectors (balanced) or
- RCA connectors (unbalanced)
- Impedance approx. 20k ohms, balanced
- approx. 10k ohms, unbalanced
- CMRR 40 dB typ. @ 1 kHz
- Max. input level +15 dBu
- OUTPUT
- Type 1/4" TS connectors (unbalanced) or
- RCA connectors (unbalanced)
- Impedance approx. 120 ohms
- Max. output level +15 dBu
- SYSTEM SPECIFICATIONS
- Frequency response 10 Hz to 200 kHz, -3 dB
- Dynamic range 110 dB, 10 Hz to 22 kHz
- Distortion 0.003 % typ. @ 0 dBu
- Crosstalk
- Signal-to-noise ratio 10 Hz - 22 kHz
- GRAPHIC EQUALIZER
- Type 9 analog stereo bands
- Control range ±6 dB or ±12 dB, switchable
- Bandwidth 1 oct.
- OTHER FEATURES
- Low-cut filter 75 Hz (12 dB/oct.)
- Input level control -12 dB to +12 dB
- POWER SUPPLY
- Mains connection external power supply
- 9 V ~ / 750 mA
- Mains voltage
- DIMENSIONS/WEIGHT
- Dimensions (H x W x D) approx. 1 8/9" (48 mm) x 9 5/9" (243 mm) x 4 5/7" (120 mm)
- Weight approx. 0.86 lbs. ( 0.39 kg)
|
- Audiophile 31-band stereo graphic equalizer for live and studio applications
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
- Ultra-low noise 4580 operational amplifiers for highest signal integrity
- Dedicated Limiters with gain reduction meters for each channel protect your sound system from overload and distortion
- Pink noise generator provides test signals to adapt your sound system to any room acoustics
- Mono subwoofer output with dedicated level control and adjustable crossover frequency
- Additional sweepable high and low-cut filters for each channel remove unwanted frequencies e.g. floor rumble, hiss etc.
- Highly accurate 8-segment LED input/output metering and input gain controls for easy level setting
- Relay-controlled hard bypass with an auto-bypass function during power failure (fail-safe relay)
- Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
- “Planet Earth" switching power supply for maximum flexibility (100
- 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
| INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot)
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot)
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 100 ohm, unbalanced 50 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: 50kHz, +0.5/-3dB
Dynamic Range: Typicall >112dB
Signal-to-Noise: Typically >95dB
THD+Noise: | The DPX Series was created in response to our dealers, contractors and users requesting a simple solution requiring general EQ and comp/limiting. Two products have
been developed, the DPX-100 Graphic Equalizer & Compressor/Limiter and DPX-200
Parametric Equalizer & Compressor/Limiter. Using proven circuitry from our popular MQX and PQX series equalizers and combining
these features with our CLX series compressor/limiters provides two tools no audio system
should be without. By combining the features and benefits of two processors into one unit,
the result is two powerful tools providing a simple solution to everyday audio applications.
The EQ section of the DPX-100 is a 15-band, constant Q, 2/3 octave, ISO center, precision
wein bridge filter design. Other EQ features are: frequency range from 25Hz to 16KHz,
selectable 15dB or 6dB range, 25mm faders with 'center off' position, EQ in/out switch,
signal present and clip LEDs and switchable 18dB/octave -20Hz high pass filter. Two separate inputs are available in the DPX-200; a microphone preamp with input pad
and a line input. An input select switch and input level control are located on the front
panel. The EQ section consists of 4 bands of filtering; two full-bandwidth parametric EQs
as well as a low-shelf and high-shelf filter. Other EQ features are: in/out switching for
each filter, cut and boost of 15dB, signal present and clip LEDs, and master EQ level control.
The compressor/limiter section uses peak detection circuitry and has individual controls
for gain, threshold, ratio, attack, release and output level. More compressor/limiter features
include: in/out switch, 11-stage LED gain reduction meter, selectable 11-stage LED input/output
level meter, and a detector patch point for frequency-selective limiting or ducking. Additional features of the DPX-100 and DPX-200 are: the equalizer section and
compressor/limiter may be used independently or chained together in series, balanced
XLR and inputs and outputs, extremely low noise and distortion, internal power supply
and Ashly's five-year worry-free warranty.
|
Precision Wein-bridge filters |
|
Constant "Q" design for low ripple and minimum interaction |
|
High quality detented 25mm faders |
|
Compressor/Limiter use peak detection circuitry |
|
Balanced Inputs and Outputs |
|
|
Five Year Warranty |
|
* 2 channel 15 2/3 octave band graphic equalizer
* 25Hz - 16kHz frequency control * Constant Q circuitry
(3% frequency accuracy) * Selectable 6dB or 12dB control
* Variable level control * By-pass switch * Overload threshold LED (5dB below clipping) * Ground lift switch * XLR & 1/4" TRS balanced Inputs/Outputs * Power: Selectable 120V/220V voltage
* Dimensions: 1.75" H x 19" W x x 8.5" D / 44.5mm x 483mm x 216mm - 1 space r.m. * Weight: 4.5 lbs. / 2.5kg
XEQ-152 Specifactions:
* Input type: Active balanced / Unbalanced * Output Impedance: | Full control of the 4.24G is accomplished from the front panel in an intuitive and straight-forward layout. It's like using your old analog equalizer, only with extra features and benefits to simplify your audio chain requirements. Housed in an all-steel 2RU package, the 4.24G has all the audio processing tools needed for flawless equalization and sound control. In addition to 28 bands of 1/3-octave EQ are a programmable compressor/limiter for speaker protection and programmable delay of up to 1.364 seconds for time delay applications required by speaker arrays and clusters or monitor speakers. Individual, programmable 24dB/octave high- and low-pass filters allow you to zero in and fine tune the audio spectrum you need to work in. A large 240 x 64 fluorescent backlit display keeps you constantly informed of every parameter, function and utility, including metering and user preferences. The 4.24G may be controlled from a remote location using the Protea 4.24RD.
Protea 4.24G is Crestron I2P certified.
24-bit A/D-D/A Audio Resolution
24-bit/100 MHz (x2) Digital Signal Processing
Four 28-band 1/3-octave Channels of EQ Programmable Compressor/Limiter
Programmable Delay up to 1.364 Seconds
Programmable High and Low Pass Filters
Intuitive User Interface
Large, 240 x 64 Fluorescent Backlit Display
Linkable Channels
Constant Q/Reciprocal Filter Design
±15dB Boost and Cut, 0.5dB increments
128 Preset Locations, 50 Scenes
RS-232 Computer Interface
Full MIDI Implementation
Input and Output Metering viewable in dB or VU
Password Protection of System Operation
5-Year Worry-Free Warranty |
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.