Behringer PX3000 Ultrapatch Pro 48-Channel Multifunctional Patch Bay

• Balanced jack sockets 6.3 mm
• Three switchable modes per channel: Normal (normalised), Half Normal (half normalised) and THRU (through-connected)
• Switch on the top of the patch bay for each channel for switching the modes
• Body shape: 19\" / 1 RU
• Dimensions (W x H x D): 483 x 45 x 93 mm
• Weight: 1.8 kg

2 x 24 TB (BP0316/MIL-P-642/2) jacks, half normalled bottom row (not programmable), solder terminals

The NPP-TB patch panels are equipped with gold plated, high quality long life NJ6TB-V Jacks for BPO/MIL style plugs. The panels are easily programmable for six switching configurations and offer a flexible grounding system. The NPP-TB patch panels are very robust and compactly designed for 19" rack mount (19" x 1U) with galvanized metal housing and a built-in cable bar on the rear for securing wires. There is a rear extension bar (NPP-S) available as an option. On the front side there is an attractive additional lettering area for each channel pair with a marking strip and individual snap-on colour coding plates.

• 2 x 24 Neutrik NJ6TB-V long frame 1/4" TRS jacks acc. to BPO 316 / MIL-P-641/3
• Very robust and compact galvanized metal housing
• Eye catching channel identification through colored snap-on coding tabs
• Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
• With high quality long life gold plated Neutrik jacks
• Flexible grounding system

Product
Connector Type    Patch Panel
Electrical
Signal Type    Digital suitability acc. AES/EBU (3.072 Mb/s and 6.144 Mb/s)
Contact resistance     20 mΩ
Dielectric strength     1 kVdc
Frequencyrange    DC to > 50 MHz
Insulation resistance    > 1 GΩ
Channel separation    > 100 dB @ 10 kHz, 600 terminated
> 40 dB @ 6 MHz, 110 terminated
Mechanical
Insertion force    Withdrawal force    > 8 N
Lifetime    > 5000 mating cycles
Wiring    4 x 50 pole D-Sub
Locking device    Retention spring
Material
Contact plating    TRIBOR® (0.2 µm AuCo over 2 µm NiP) (Jacks)
Contacts    Bronze (CuSn6) (Jacks)
Shell    Steel and aluminium
Shell    PA 66 blend (Jacks)
Shell plating    Black
Front panel    AlMgSi0.5 F22
Environmental
Temperature range    -30 °C to +80 °C
Optical
Mobile Cables
Dimensions    482 x 44 mm (19'' x 1U)
Depth    178 mm (7'')
Channels    2 x 48 jacks, half normalled, 4 x 50 pole D-Sub, grounds are tied together

Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled bottom row, 288 solder terminals for fixed installations - cost effective, including top and bottom cover

The Press Patch Box is a special kind of audio signal distributor intended for use at press conferences. It features separate inputs for microphone and line signals (from a mixing console output).

Also available as stereo version (PPB20S)

A high quality input amplifier with a transformer balanced input provides a wide dynamic range. A total of 20 transformer-balanced XLR/m outputs with separate paired driver circuits make it possible to connect up video cameras and other recording equipment.

The nominal output level is +4 dBu at 600 Ω. Channels 19 and 20 have TRS jack sockets for balanced/unbalanced signals and also phono sockets (-10 dBu nominal level).

Where more than 20 outputs are required, additional PPB 20s can be hooked up via a rear BUS IN/OUT socket. Signal monitoring is provided by a 10 LED strip displaying a range of -40 to +10 dB (0 dB in the display = 4 dBu output) and an adjustable headphones amplifier.

The PPB20 has an integral, shielded power supply unit. An extra DC input makes it possible to connect up a (backup) battery power source. A PW4 can provide the necessary backup power supply for two PPB20s.

Input:

• Transformer-balanced, 4 XLR/f sockets, with paired front/rear parallel connections for separate microphone/line signals.
• Nominal Input Impedances: Microphones 200 Ω, Line = 5 kΩ
• Max. input levels: microphones = 0 dBu, Line = +20 dBu
• Max. amplification: microphones = +66 dB, Line = +22 dB (constantly adjustable via switch and potentiometer).

Output:

• 20 XLR/m, 2x TRS jack, 2x phono, all transformer-balanced and floating with separate ground lift switches at rear
• Nominal output impedances: XLR = 300 Ω, jack and phono = 600 Ω
• Nominal output levels: XLR = +4 dBu/20 dBu max.; jack/phono = -10 dBu, + 6 dBu max
• Headphones output: Stereo jack socket, with mono tip + ring, Designed for use with 8 Ω - 200 Ω headphones (constantly adjustable level).
• 10 LED strips displaying a range of -40 to +10 dB.
• Bus input/output (mono jack)
• Power Supply: 230 VAC or ± 12 V to ± 18 VDC, 15 Watts.
• Housing: 19'', 3 U, approx. 200 mm deep.

Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled,