Content |
DT 102
Features Closed operating principle Excellent ambient noise attenuation Wide and accurate frequency response High SPL capability Rugged and modular construction for easy servicing Straight detachable cable (3 m) with 1/4" stereo jack
Technical Specifications Transducer type Dynamic Operating principle Closed Weight without cable 250 g Frequency response 30 - 20,000 Hz Nominal impedance acc. to IEC 60268-7 16 Ω ± 10% per cartridge Nominal SPL acc. to IEC 60268-7 94 dB Nominal THD acc. to IEC 60268-7 < 1% Power handling capacity acc. to IEC 60268-7 1000 mW Sound coupling to the ear Circumaural Ambient noise isolation 20 dB (A)
| DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
Transmission type |
|
Wired |
Headphone design (operating principle) |
|
Closed |
Headphone impedance |
|
80 ohms |
Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
Construction |
|
Circumaural (around the ear) |
Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
Net weight without packaging |
|
300 g |
|
The SRH1440 Professional Open Back Headphones provide full-range audio with detailed highs and rich bass in a sleek, attractive design. Made for mastering and critical listening, the premium padded headband with steel frame offers hours of listening comfort. The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment. 40 mm Neodymium drivers deliver full-range audio with rich, controlled bass Open-back, circumaural design for exceptionally natural sound, wide stereo image, and increased depth of field Impedance optimized for direct connection to wide range of portable audio devices Fully adjustable, premium padded headband with steel frame and sleek, ergonomic design for hours of listening comfort Oxygen-free copper cable with Kevlar® reinforced jacket for superior performance and durability Dual-exit cables with gold-plated MMCX connectors provide secure connection and detachability for easy storage or replacement Replaceable velour ear pads with high-density, slow-recovery foam for exceptional comfort Individually tested and serialized Legendary Shure durability to withstand the rigors of everyday use Type Open-back, circumaural Frequency Range 15 Hz – 27 kHz Cable Length 6.9 ft (2.1 m) Plug Gold-plated 1/8" (3.5 mm) stereo mini-jack User's Manual
| With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced detail, with excellent mid-range definition
- Circumaural design contours around the ears for excellent sound isolation in loud environments
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: CCAW (Copper-clad aluminum wire)
- Frequency Response: 15 - 22,000 Hz
- Max Input Power: 1,300 mW @ 1KHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Folding/collapsible: Yes
- Weight: (Without cable) 7.8 oz (220 g)
- Cable - Detachable: No
- Cable: 3 m (9.84') Straight cable, left-side exit
- Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
- Accessories included: Screw-on 1/4" adapter, pouch
|
- Professional circumaural hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High noise attenuation
- For onstage and studio use
- Automute feature mutes headphones when they are taken off
- Leatherette and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed AKG legend, K 271 MK II combines the benefits of AKGʼs circumaural design for extreme comfort and a closed-back design for maximum isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich.
The K 271 MK II is the perfect choice for any application where sonic bleed could cause problems such as broadcast work.
Another important feature of the K 271 MK II is the addition of a switch in the headband that mutes the audio just as soon as the headphones are taken off.
By the way, the K 271 MK II is also available as a headset with dynamic microphone (HSD 271) or condenser microphone (HSC 271).
| DT 990 PRO
Professional headphone for studio applications, open
Features
Open, diffuse-field systems
Professional version of the oftentimes awarded DT 990
Excellent sound reproduction
Robust spring steel headband
Single-sided cable
Soft replaceable ear cushions
Gold plated stereo mini jack and 1/4" adapter
Technical Specifications
Transducer type Dynamic
Operating principle Open
Weight without cable 250 g
Frequency response 5 - 35,000 Hz.
Nominal impedance acc. to IEC 60268-7 250 Ω /System
Nominal SPL acc. to IEC 60268-7 > 96 dB
Nominal THD acc. to IEC 60268-7
Power handling capacity acc. to IEC 60268-7 100 mW
Sound coupling to the ear Circumaural
Average pressure on ear acc. to IEC 60268-7 3.5 N |
Reviews
There are no reviews yet.