BEYERDYNAMIC DT 297 PV HEADPHONES with cable

Discontinued

139.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The BEYERDYNAMIC DT-297-PV/80 is a double-sided headset Microphone with Cable All DT 297 versions are supplied with connecting cable. Technical Specifications Transducer type Condenser (back electret) Operating principle Closed Polar pattern Cardioid Open circuit voltage at 1 kHz (0dB = 1V/Pa) 5 mV/Pa at f = 1 kHz Nominal impedance approx. 300 Ω Load impedance […]

 

Read more

The BEYERDYNAMIC DT-297-PV/80 is a double-sided headset Microphone with Cable

All DT 297 versions are supplied with connecting cable.

Technical Specifications

Transducer type Condenser (back electret)
Operating principle Closed
Polar pattern Cardioid
Open circuit voltage at 1 kHz (0dB = 1V/Pa) 5 mV/Pa at f = 1 kHz
Nominal impedance approx. 300 Ω
Load impedance > 1000 Ω
Weight without cable 240 g
Frequency response 40 – 20,000 Hz
Current consumption approx. 3.5 mA
Ambient noise isolation approx. 16 dBA
T.H.D.
Max. SPL 132 dB
Phantom supply 12 – 48 V
S/N ratio 62 dB
Weight 30 g
Nominal SPL at 1 kHz 100 dB
Average pressure on ears 4.5 N
Gooseneck length 120 mm
Capsule diameter 19 mm

Weight 0.17 kg

Reviews

There are no reviews yet.

Be the first to review “BEYERDYNAMIC DT 297 PV HEADPHONES with cable”

Your email address will not be published. Required fields are marked *

Quick Comparison

BEYERDYNAMIC DT 297 PV HEADPHONES with cable removeBEYERDYNAMIC DT880 PRO 250ohm Headphones removeBEYERDYNAMIC DT770 M - 80 Ohm Headphones removeAUDIO TECHNICA ATH-M30X CLOSED TYPE HEADPHONES FOR MONITORING removeBEYERDYNAMIC DT770 PRO 250 Ohm Headphones removeBEYERDYNAMIC DT 150 250 Ω HEADPHONES remove
NameBEYERDYNAMIC DT 297 PV HEADPHONES with cable removeBEYERDYNAMIC DT880 PRO 250ohm Headphones removeBEYERDYNAMIC DT770 M - 80 Ohm Headphones removeAUDIO TECHNICA ATH-M30X CLOSED TYPE HEADPHONES FOR MONITORING removeBEYERDYNAMIC DT770 PRO 250 Ohm Headphones removeBEYERDYNAMIC DT 150 250 Ω HEADPHONES remove
Imagebeyerdynamic-dt-880-pro-perspective-1 headphones semi open typeBeyerdynamic-dt-150-250-ohm-headphones-black-face-1
SKUDT297PVDT 880 250DT-770M 80ATHM30XDT-770 PRO 250DT-150
Rating
Price 139.00 incl. GR VAT 199.00 incl. GR VAT 149.00 incl. GR VAT 74.23 incl. GR VAT 144.50 incl. GR VAT 240.99 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

Only 2 left in stock (can be backordered)

Available on backorder

AvailabilityOut of stockOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorderOnly 2 left in stock (can be backordered)Available on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The BEYERDYNAMIC DT-297-PV/80 is a double-sided headset Microphone with Cable

All DT 297 versions are supplied with connecting cable.

Technical Specifications

Transducer type Condenser (back electret)
Operating principle Closed
Polar pattern Cardioid
Open circuit voltage at 1 kHz (0dB = 1V/Pa) 5 mV/Pa at f = 1 kHz
Nominal impedance approx. 300 Ω
Load impedance > 1000 Ω
Weight without cable 240 g
Frequency response 40 - 20,000 Hz
Current consumption approx. 3.5 mA
Ambient noise isolation approx. 16 dBA
T.H.D. Max. SPL 132 dB
Phantom supply 12 - 48 V
S/N ratio 62 dB
Weight 30 g
Nominal SPL at 1 kHz 100 dB
Average pressure on ears 4.5 N
Gooseneck length 120 mm
Capsule diameter 19 mm
Specs:
  •     Semi - Open
  •     Innovative bass refelx system
  •     Rugged headband cosntruction
  •     Single-sided coiled cable
  •     Soft headband pad
  •     Gold plated stereo mini jack (3.5mm) and 1/4" adapter
  •     Transducer type: Dynamic
  •     Frequency response: 5 - 35,000 Hz
  •     Nominal impedance: 250 ohm
  •     Nominal SPL : 96 dB
  •     T.H.D: < 0.2%
  •     Power handling capacity: 100 mW
  •     Sound coupling to ear: Circumaural
  •     Weight (without cable) 295 g
 
DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise. The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone. ▲ Closed headphone ▲ Excellent ambient noise attenuation (35 dBA) ▲ Superb sound quality with high sound pressure level (105 dB) ▲ Extended frequency range ▲ Single-sided cable with volume control ▲ Robust, easy serviceable construction as all parts are replaceable ▲ Excellent comfort for long-term wearing, softskin ear pads ▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding ▲ Single-sided cable ▲ Supplied in a carrying case (nylon)
Transmission type Wired
Headphone design (operating principle) Closed
Headphone impedance 80 ohms
Headphone frequency response The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. 5 - 30.000 Hz
Nominal sound pressure level The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. 105 dB
Construction Circumaural (around the ear)
Cable & plug Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm)
Net weight without packaging 300 g
With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
  • Advanced build quality and engineering
  • 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
  • Tuned for enhanced detail, with excellent mid-range definition
  • Circumaural design contours around the ears for excellent sound isolation in loud environments
Specifications
  • Type: Closed-back dynamic
  • Driver Diameter: 40 mm
  • Magnet: Neodymium
  • Voice Coil: CCAW (Copper-clad aluminum wire)
  • Frequency Response: 15 - 22,000 Hz
  • Max Input Power: 1,300 mW @ 1KHz
  • Sensitivity: 96 dB
  • Impedance: 47 ohms
  • Folding/collapsible: Yes
  • Weight: (Without cable) 7.8 oz (220 g)
  • Cable - Detachable: No
  • Cable: 3 m (9.84') Straight cable, left-side exit
  • Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
  • Accessories included: Screw-on 1/4" adapter, pouch
DT770 Closed reference headphone for control and monitoring applications (optionally with limiter). The DT 770 PRO is a closed dynamic headphone and has been designed for critical music and sound monitoring. The single sided cable makes the handling of the headphone easy. The cushion system allows the DT 770 PRO to be used comfortably for long periods of time. ▲ Closed, diffuse-field studio headphone ▲ "Bass reflex" technology for improved bass response ▲ Comfortable fit due to rugged, adjustable, soft padded headband construction ▲ Robust, easy serviceable construction as all parts are replaceable ▲ Single-sided cable ▲ NEW - Limiter (Optional) ▲ Velour, circumaural ear pads  
Transmission type Wired
Headphone design (operating principle) Closed
Headphone impedance 250 ohms
Headphone frequency response 5 - 35.000 Hz
Nominal sound pressure level 96 dB
Construction Circumaural (around the ear)
Cable & plug Coiled connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm)
Net weight without packaging 270 g
Beyerdynamic DT 150 The DT 150 is a dynamic studio headphone for use in broadcasting, film and recording studios and other audio monitoring applications where size, comfort and performance are primarily requirements. Due to its closed design it features excellent ambient noise isolation for reference monitoring.
  • Transducer type: Dynamic
  • Operating principle: Closed
  • Frequency response: 5 - 30,000 Hz
  • Nominal impedance: 250 Ω
  • Nominal SPL: 97 dB
  • Power handling capacity: 100 mW
  • Sound coupling to the ear: Circumaural
  • Headband pressure: 4.5 N
  • Ambient noise attenuation: approx. 20 dBA
  • Weight (without cable): 250 g
 
Weight0.17 kg0.27 kg0.27 kg1.00 kg0.27 kg0.500 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.17 kg
Weight 0.27 kg
Weight 0.27 kg
Weight 1.00 kg
Weight 0.27 kg
Weight 0.500 kg