BEYERDYNAMIC DT770 M – 80 Ohm Headphones

149.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise. The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly […]

 

Read more

DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.

The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.

▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)

Transmission type Wired
Headphone design (operating principle) Closed
Headphone impedance 80 ohms
Headphone frequency response

The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones.

5 – 30.000 Hz
Nominal sound pressure level

The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume.

105 dB
Construction Circumaural (around the ear)
Cable & plug Straight connecting cable with mini-jack plug (3.5 mm) & ¼” adapter (6.35 mm)
Net weight without packaging 300 g
Weight 0.27 kg

Reviews

There are no reviews yet.

Be the first to review “BEYERDYNAMIC DT770 M – 80 Ohm Headphones”

Your email address will not be published. Required fields are marked *

You may also like…

Quick Comparison

BEYERDYNAMIC DT770 M - 80 Ohm Headphones removeBEHRINGER HPS5000 Closed-Type High-Performance Studio Headphones removeShure SRH1440 Professional Open Back Headphones Open Back removeBEYERDYNAMIC DT 150 250 Ω HEADPHONES removeShure SRH940E Professional Reference Headphones removeBEYERDYNAMIC T1 3rd Generation High-End Tesla Headphones remove
NameBEYERDYNAMIC DT770 M - 80 Ohm Headphones removeBEHRINGER HPS5000 Closed-Type High-Performance Studio Headphones removeShure SRH1440 Professional Open Back Headphones Open Back removeBEYERDYNAMIC DT 150 250 Ω HEADPHONES removeShure SRH940E Professional Reference Headphones removeBEYERDYNAMIC T1 3rd Generation High-End Tesla Headphones remove
Imagehps5000 closed back headset headphones microphone podcast gamingBeyerdynamic-dt-150-250-ohm-headphones-black-face-1Beyerdynamic t1 tesla close type headphones hi-fi
SKUDT-770M 80E005304SRH1440DT-150SRH940ET1 (3rd generation)
Rating
Price 149.00 incl. GR VAT 27.50 incl. GR VAT 334.80 incl. GR VAT 240.99 incl. GR VAT 248.00 incl. GR VAT 899.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock (can be backordered)

AvailabilityOnly 1 left in stock (can be backordered)In stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Wide frequency response
  • Comfortable to wear
  • High dynamic range
  • 1/8" connector and 1/4" adapter
  • 6' coiled cable with oxygen-free copper wires
  • High-end stereo headphones for sophisticated music enjoyment at home
  • Tilted Tesla drivers ensure a precise and spatial sound signature
  • Double-sided, detachable connection cable made from ultra-high-purity OCC7N copper and covered with fabric
  • Breathable, replaceable velour ear pads with memory foam
  • Handmade in Germany
ContentDT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise. The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone. ▲ Closed headphone ▲ Excellent ambient noise attenuation (35 dBA) ▲ Superb sound quality with high sound pressure level (105 dB) ▲ Extended frequency range ▲ Single-sided cable with volume control ▲ Robust, easy serviceable construction as all parts are replaceable ▲ Excellent comfort for long-term wearing, softskin ear pads ▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding ▲ Single-sided cable ▲ Supplied in a carrying case (nylon)
Transmission type Wired
Headphone design (operating principle) Closed
Headphone impedance 80 ohms
Headphone frequency response The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. 5 - 30.000 Hz
Nominal sound pressure level The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. 105 dB
Construction Circumaural (around the ear)
Cable & plug Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm)
Net weight without packaging 300 g
In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones. Budget Headphones Closed Type with High-performance Studio Headphones Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget. Behringer HPS5000 Headphones Features at a Glance:
  • Ultra-wide frequency response
  • High-definition bass and super-transient highs
  • Highly-efficient cobalt capsule
  • Outstanding dynamic range
  • Single-sided coiled cord with oxygen-free copper wires
  • Optimised oval-shaped ear cups
  • 1/8'' connector plus 1/4'' adapter included
  • Ultra-rugged headband construction
  • Designed and engineered in Germany
  Headphone
Driver Size 1.6" / 40 mm
Driver Type Dynamic
Magnet Type Cobalt
Design Over-Ear (Circumaural)
Earcup Style Closed-Back
General
Frequency Response 20 Hz to 20 kHz
Sensitivity 113.5 dB at 1 kHz
Impedance 32 Ohms
Maximum Power Handling 100 mW
Connectivity
Audio Connector to Source 1/8" / 3.5 mm
Adapter (Included) 1/4“
Cable
Cable Length 3.3 to 8.2\' / 1 to 2.5 m (Coiled)



The SRH1440 Professional Open Back Headphones provide full-range audio with detailed highs and rich bass in a sleek, attractive design. Made for mastering and critical listening, the premium padded headband with steel frame offers hours of listening comfort.

The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment.



40 mm Neodymium drivers deliver full-range audio with rich, controlled bass
Open-back, circumaural design for exceptionally natural sound, wide stereo image, and increased depth of field
Impedance optimized for direct connection to wide range of portable audio devices
Fully adjustable, premium padded headband with steel frame and sleek, ergonomic design for hours of listening comfort
Oxygen-free copper cable with Kevlar® reinforced jacket for superior performance and durability
Dual-exit cables with gold-plated MMCX connectors provide secure connection and detachability for easy storage or replacement
Replaceable velour ear pads with high-density, slow-recovery foam for exceptional comfort
Individually tested and serialized
Legendary Shure durability to withstand the rigors of everyday use




Type
Open-back, circumaural
Frequency Range
15 Hz – 27 kHz

Cable Length
6.9 ft (2.1 m)
Plug
Gold-plated 1/8" (3.5 mm) stereo mini-jack


acrobat_reader_logo. User's Manual

Beyerdynamic DT 150 The DT 150 is a dynamic studio headphone for use in broadcasting, film and recording studios and other audio monitoring applications where size, comfort and performance are primarily requirements. Due to its closed design it features excellent ambient noise isolation for reference monitoring.
  • Transducer type: Dynamic
  • Operating principle: Closed
  • Frequency response: 5 - 30,000 Hz
  • Nominal impedance: 250 Ω
  • Nominal SPL: 97 dB
  • Power handling capacity: 100 mW
  • Sound coupling to the ear: Circumaural
  • Headband pressure: 4.5 N
  • Ambient noise attenuation: approx. 20 dBA
  • Weight (without cable): 250 g
 



Designed for professional audio engineers and in-studio talent, SRH940 Headphones from Shure deliver accurate response across the entire audio spectrum for smooth high-end extension with tight bass.

Superior transient response provides minimal distortion. The collapsible, lightweight design with premium padded headband offers superior comfort and portability. Two included detachable cables (straight and coiled) and a replacement set of velour ear pads ensure a long product life.

Also includes a hard zippered travel case and a threaded 1/4" (6.3) mm gold-plated adapter.



Accurate frequency response delivers smooth high-end extension with tight bass, and superior transient response for minimal distortion
Lightweight, ergonomic fit with premium padded headband provide maximum comfort over extended periods
Closed-back, circumaural design rests comfortably over the ears and reduces background noise
Collapsible design with 90-degree swivel ear cups for convenient storage and portability
Legendary Shure quality to withstand the rigors of everyday use
Bayonet Clip securely locks cable into ear cup
Replaceable velour ear pads included to ensure long product life and maximum comfort
Two included detachable cables (coiled & straight) provide flexible wearing options and easy replacement
Zippered hard travel case protects headphones when on the go or not in use




Sensitivity
100 dB/mW
lmpedance
42 Ω
Frequency Range
5 Hz - 30 kHz
Weight
11 oz (320 g)

Cable Length
Coiled: 9.84 ft (3 meters), detachable Straight: 8.2 ft (2.5 meters), detachable
Cable Style
Detachable oxygen-free copper
Plug
Gold-plated 1/8" (3.5 mm) stereo mini jack

acrobat_reader_logo. Technical Data

 
Weight0.27 kg0.20 kg0.40 kg0.500 kg0.40 kg560 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.27 kg
Weight 0.20 kg
Weight 0.40 kg
Weight 0.500 kg
Weight 0.40 kg
Weight 560 kg