BITTNER AUDIO XV 200-2x100W-100V POWER AMPLIFIER

727.87 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
XB Series – Intelligent Power Power Without Compromises.The XV is designed for paging, music and alarm signals. Versatile, dynamic and extremely rugged according to IEC286-3. For the highest requirements in safety and quality.Sequential power on, alive contacts and incorporated ground fault detection – the XV is the solution under all conditions. Without the need for […]

 

Read more

XB Series – Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection –
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 200:  2x 100 W / 100 V
Class:  AB
Frequency Response: 20 Hz – 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  15 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19″ x 3.5″ x 15“)

 

Weight 15.00 kg

Reviews

There are no reviews yet.

Be the first to review “BITTNER AUDIO XV 200-2x100W-100V POWER AMPLIFIER”

Your email address will not be published. Required fields are marked *

Quick Comparison

BITTNER AUDIO XV 200-2x100W-100V POWER AMPLIFIER removeTOA A-2120 120 Watt Amplifier removeINTER-M PAC-5000 Digital Public Address Combination System removeTOA A-1806 MIXER AMPLIFIER 60W/100V removeINTER-M PAM-120 Mixer/Amplifier removeBITTNER AUDIO XV400-2x200W-100V POWER AMPLIFIER remove
NameBITTNER AUDIO XV 200-2x100W-100V POWER AMPLIFIER removeTOA A-2120 120 Watt Amplifier removeINTER-M PAC-5000 Digital Public Address Combination System removeTOA A-1806 MIXER AMPLIFIER 60W/100V removeINTER-M PAM-120 Mixer/Amplifier removeBITTNER AUDIO XV400-2x200W-100V POWER AMPLIFIER remove
Image
SKUXV200A-2120PAC-5000A-1806PAM-120XV400
Rating
Price 727.87 incl. GR VAT 348.00 incl. GR VAT 1,200.00 incl. GR VAT 381.99 incl. GR VAT 437.00 incl. GR VAT 892.79 incl. GR VAT
Stock

Available on backorder

In stock

In stock

In stock

In stock

Available on backorder

AvailabilityAvailable on backorderIn stockIn stockIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 200:  2x 100 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  15 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

 

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

 

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 120W
Power Consumption 124W (EN60065), 260W(AC operation at rated output, 8A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:83W (100V)
LOW IMPEDANCE: 4Ω (22V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 360.3 (D) mm
Weight 10kg

 

- INTEGRATED DIGITAL PA COMBINATION SYSTEM (ALL IN ONE SYSTEM)

- SIMULTANEOUS 2 GROUP DIFFERENT BROADCASTING

- DIGITAL PROCESSING & DIGITAL AMPLIFIER

- CD COPY (EXTEND LIFE-TIME OF CD MECHANISM)

- USB INTERFACE (USB HOST)

POWER AMP

Rated Output

120W + 120W

Input Sensitivity

-10dBV / 10kΩ

S/N

Better than 75dB

Frequency Response

100Hz-18kHz

MIC/LINE 1~5CH

MIC Input Sensitivity

-55dBV / 10kΩ

MIC S/N

Better than 55dB

MIC Frequency Response

120Hz-10kHz

MIC T.H.D

Less than 0.5%

LINE Input Sensitivity

-10dBV / 10kΩ

LINE S/N

Better than 65dB

LINE T.H.D

Less than 0.3%

CD

S/N

Better than 80dB

Frequency Response

100Hz-20kHz

TUNER

S/N

Better than 60dB

Frequency Response

120Hz-12kHz

Power Consumption

170W (1/8 Power)

Weight

16kg/35.3lb

Dimension

482(W)x177(H)x373(D)mm/19(W)x7(H)x15(D)in

※ Specifications and design subject to change without notice.

Toa A1806 powered mixer is a basic mono/2 zones 60 Watts (100V) PA amplifier with 3 mic channels suited for broadcasting, paging or background music in schools, offices or shops.

 
Weight (KG) 9.4
Size (mm) 420 x 107.7 x 367
Colour Black
Manufacturer warranty (UK) 1 year RTB

- MODULAR DESIGN

Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the PAM-120A/340A/480Aʼs audio capabilities.

- INDIVIDUAL INPUT GAIN CONTROLS

Rear-panel gain controls for each input channel for total control of individual levels.

- SPEAKER SELECT

Six speaker select switches enable you to select any combination of up to five speakers.

- SELECTABLE PRIORITY MUTING

Switchable audio signal priority for Channels 1 and 2, Chime and Telephone input over other input sources.

- REMOTE CONTROL INPUT (only PAM-340A/480A)

Individual speaker zones can be selected and chime can be operated by wired remote control.

- ANNOUNCEMENT CHIME

Convenient four-tone chime for use with announcements.

- EM(EMERGENCY) - OPTIONAL EMERGENCY VOICE IC (only PAM-340A/480A)

When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted.

Rated Output Power

PAM-120A(THD 1%) : 120W (RMS)

PAM-340A(THD 3%) : 340W (RMS)

PAM-480A(THD 3%) : 480W (RMS)

Frequency Response

Amp In

80Hz~20kHz

Link In

80Hz~15kHz

CH1~CH6

120Hz~8kHz

Remote In

120Hz~8kHz(PAM-340A, PAM-480A)

T.H.D.(at 1kHz Rated Output)

Less than 1%(PAM-120A)

T.H.D.(at 1kHz Half Power Output)

Less than 0.5%(PAM-340A, PAM-480A)

S/N

Amp In

Better than 90dB(PAM-120A)

Better than 88dB(PAM-340A/480A)

Link In

Better than 65dB

CH1~CH6

Better than 50dB

Remote In

Better than 50dB(PAM-340A/480A)

Input Sensitivity/Impedance

CH1~CH6

TRIM VR -60dB Position

1mV/10kΩ

TRIM VR -16dB Position

158mV/10kΩ

Link In

100mV/10kΩ

Amp In

1V/47kΩ(PAM-120A)

1V/20kΩ(PAM-340A/480A)

Remote In

1V/10KΩ(PAM-340A/480A)

Speaker Output/Impedance

PAM-120A : 120W/4Ω, 70V/42Ω, 100V/83Ω

PAM-340A : 340W, 100V/29.4Ω

PAM-480A : 480W, 100V/20.8Ω

Preamp Output/Impedance

1V/600Ω

Tone Control (100Hz, 10kHz)

±12dB

CH1~CH6 EQ Control (100Hz, 1kHz, 10kHz)

±12dB

Power Source

100–120VAC or 220V–240VAC; 50/60Hz, 24V DC(only PAM-120A)

(Supplied AC mains transformer depends on country requirements)

Power Consumption

PAM-120A : 135W(1/8 POWER), 200W(1/3 POWER), 300W(FULL POWER)

PAM-340A : 260W(1/8 POWER), 400W(1/3 POWER), 620W(FULL POWER)

PAM-480A : 360W(1/8 POWER), 550W(1/3 POWER), 880W(FULL POWER)

Weight

PAM-120A : 13kg/28.7lb

PAM-340A : 13.5kg/29.7lb

PAM-480A : 15.5kg/34.2lb

Dimensions

420(W) x 132(H) x 360(D)mm/16.5(W) x 5.2(H) x 14.2(D)in

Operation Temperature

14F~104F (-10°C~+40°C)

※ Specifications and design subject to change without notice.

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 400:  2x 200 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  17 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

Weight15.00 kg10.00 kg22.00 kg9.40 kg13.00 kg17.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 15.00 kg
Weight 10.00 kg
Weight 22.00 kg
Weight 9.40 kg
Weight 13.00 kg
Weight 17.00 kg