| Content | Electric Amplifier for Guitar
- Sound and features redesigned
- The patented ISF Tone Control makes versatile sounds possible for all genres
- 3 Channels: Clean, Crunch and Lead
- Effects: Chorus, Delay and Reverb
- Controller: patented ISF control, Gain, Volume
- 3.5 mm Frequency-corrected headphone jack
- 3.5 mm Aux-In/MP3 connection
- Integrated 6.3 mm mono jack for direct connection to the electric guitar
- Suitable for all types of jack sockets due to foldable plug
Dimensions (W x H x D): 86 x 31 x 80 mm
Weight: 40 g | Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
| The VOX AMPLUG AC30 Guitar Headphone Amplifier, AC30 voicing. Plugs directly into your guitar, a great-sounding headphone guitar amp that gives you serious sound fast.
The VOX amPlug AC30 is your fastest ticket to great tone – anytime, anywhere! Jamming late at night? Donʼt want to wake the neighbours? Maybe you want to work out a lick with your MP3 player without taking the time to set up your amp. You want to play guitar right now. amPlug is the answer. Simply plug this palm-sized headphone guitar amp directly into your guitar, and enjoy serious guitar sound anywhere, anytime. VOX amPlug AC30 is based on a vintage VOX AC30. Even with its ultra-compact size, amPlug AC-30 perfectly reproduces the complex and warm distortion that is distinctive of a vacuum tube. Using all new analog modeling technology, amPlug delivers full-fledged amp sound. With its completely analog design, great care was also taken with amPlug's gain circuitry. The "AC30" uses two natural-sounding gain stages to reproduce the distinctive AC30 tone. Even the circuit response of the original amp is simulated completely. The simulation extends not only to the response of the tone circuits, but also to the way in which the high frequency and gain are affected when you turn down the volume control of the guitar. Every detail has been faithfully reproduced. With up to fifteen hours of battery life, it's easy to take amPlug anywhere. In addition to practicing at home, it's a great way to warm up before a live performance or on the road. And amPlug is not just a convenient way to get great guitar sound. There's also an AUX input jack so you can jam along with your CD/MP3 player.
The main features of the VOX AMPLUG AC30 include:
- Plugs directly into your guitar, a great-sounding headphone guitar amp that gives you serious sound fast
- AUX in jack lets you jam along with your CD/MP3 player
- 100% analog circuit faithfully simulates the response of the original amps
- AC30 emulates the AC30 top boost sound of a vintage VOX AC30
- Up to 15 hours of battery life with two Alkaline AAA batteries
- Quick and easy setup! Just connect amPlug to your guitar and enjoy serious sound
- Dimensions (W x D x H): 86 x 80 x 31 (mm), 3.39 x 3.15 x 1.22 inches
- Weight: 40g /1.41oz. (not including batteries)
- Included items: two AAA zinc-carbon batteries
|
The compact HX-3 Headphone Distribution Amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources. The HX-3 can produce very high headphone levels with extremely low noise and distortion.
HX-3 Key Features
Great for radio, television, film, and music production applications, the battery-powered HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3's for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.
The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.
The HX-3 can add headphone outputs to the 552, 302, MixPre-D, MM-1, and USBPre-2.
HX-3 Key Features List - Three isolated headphone outputs with individual volume controls.
- 125 dB dynamic range with flat frequency response.
- Durable 1/4-inch connectors, panel mounted for strength.
- Stereo or mono monitoring.
- Peak LED indicates headphone overload.
- Two balanced XLR line level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs.
- Loop Output to connect additional HX-3's in series.
- All-metal connectors solidly mounted to the chassis for durability and RF immunity.
- Free from "Pin-1" grounding problems.
- Internal battery-power for up to 18 hours from two AA alkaline batteries.
- Chassis-isolated 5 to 18 VDC input for easy external DC powering.
- Power LED indicates low battery power.
- High strength, extruded aluminum chassis with protective metal end panels.
|
Overview
Sound can be perfected with Sennheiserʼs HDVA 600. Delivering authentic sound in its purest form, listeners are treated to a world of sheer listening pleasure. Years of knowledge in audio engineering and innovations in acoustic amplification, resulted in the creation of the HDVA 600. The consistently symmetrical signal processing and extremely low harmonic distortion guarantees an absolutely precise sound. Also, thanks to their pre-amp performance, they are easy to adjust and be connected directly to speakers for optimum audio amplification. In essence, the HDVA 600 provides a spectacular listening experience when paired with any Sennheiserʼs audiophile headphones.
Features
Consistently symmetrical signal processing for maximum sound quality
Symmetrical inputs and outputs simplify integration into a system
High-end ALPS quadruple potentiometer achieve perfect channel equality
Variable gain factor (five stages) for optimized use of low impedance headphones
Sophisticated metal housing to protect against signal scatter and vibration
Solid controls turned from solid metal, providing the utmost in long-term stability |
- All-passive volume control circuit
- Stereo and AUX inputs
- Dual outputs
- Additional mono output
- Balanced and unbalanced connection
- Integrated high quality headphone amplifier
- Mono, mute and PFL switches
- Stereo volume, AUX and headphone level controls
- Elegant design with solid wood side panels
- Built to last
The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the included power supply.
Symmetric combo sockets serve as stereo input. The Monicon® L’s AUX input features RCA sockets and a 3.5 mm stereo jack. The compact console offers outputs for two monitor pairs and a mono summed output via XLR sockets. The stereo or AUX input can be selected alternately, the two outputs individually and together. In addition to its large volume controller, the Monicon® L is also equipped with mono, mute and PFL switches, a 6.35 mm headphone output, and separate AUX and headphone controllers for convenient operation.
Product type
Other Studio and Recording Equipment
Channels
2
Inputs
2
Input connectors
3.5 mm TRS , RCA , XLR
Input type
balanced/unbalanced (depending on TS/TRS connection)
Max. input level
20 dBu
Input impedance
(balanced) 10k Ohm(s) , (unbalanced) 5k Ohm(s)
Outputs
3
Output connectors
XLR
Output type
balanced/unbalanced (depending on TS/TRS connection)
Max. output level
20 dBu
Output impedance
600 Ohm(s)
Frequency response
10 - 40000 Hz
THD
0.001 %
Max. attenuation
(Attenuator + Mute) 112 dB , (Attenuator) 85 dB
Controls
attenuation , input selector , mono , mute , output selector , PFL source
Cabinet material
sheet steel , wood
Cabinet surface
Powder coated
Width
218 mm
Height
77 mm
Depth
100 mm
Weight
1,14 kg |
Reviews
There are no reviews yet.