Content |
Meet the Ball, the latest addition to our award-winning family of hand-built microphones. So-named for its unique shape and inimitable Blue styling, The Ball is our first offering in the dynamic mic category. But a phantom-powered dynamic? Yes. And no. Most recordists know that conventional dynamic mics do not require external DC power. Rather, they employ a relatively simple circuit and derive their output voltage through electromagnetic induction. While this makes them rugged, reliable and easier to operate than their electrostatic counterparts, they also present the user with a unique set of problems. Chief among these is frequency-dependent variable resistance which has dramatic effects on the transducer?s acoustic balance, phase coherence, noise specification and overall output. Our engineers solved this problem by incorporating a phantom-powered proprietary active balancing circuit in the Ball?s output stage. This circuit maintains a constant pure-resistive 50-ohm load across the useable frequency spectrum yielding an exceptionally smooth and open sound previously unheard of in a dynamic microphone. Additionally, as a dynamic mic, the Ball is capable of handling extremely high sound pressure levels without distortion, making it the ideal choice for studio, stage, broadcast, film or any other applications where reliability, versatility and the utmost sound quality is required.
SPECS: Year Introduced: 2003 Operating Principal: Dynamic transducer with active“Class-A" phantom-powered solid-state circuitry Polar Pattern: Cardioid Frequency Response: 35Hz - 16kHz Sensitivity: 3.5mV/Pa at 1kHz, 1 Pa = 94dB SPL Output Impedance: 50? Recommended Load Impedance: 2k? Maximum SPL: 146 dB SPL (2k? load at 1% THD) Output Noise Level: 18 dB-A Power Requirement: 48V DC Phantom Power Current Draw: 2.5 mA
|
The super-cardioid e 609 instrument microphone has been specially developed for miking guitar cabs face on and extremely close to the signal source.
Pick-up pattern : Super-cardioid
Frequency response : 40.....15000 Hz
Sensitivity in free field, no load (1kHz) : 1,5 mV/Pa
Nominal impedance : 350 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 55 x 34 x 134 mm
Weight : 140 g
|
The E-602 is a cardioid microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.
Frequency Response : 20.....16000 Hz
Sensitivity in free field, no load (1kHz) : 1,0 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 60 x 153 mm
Weight : w/o cable 550 g
|
The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
Features
- A highly consistent cardioid polar pattern
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS
Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
Suggested Applications
Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording
|
NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.
Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.
Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Compact design reduces stage clutters
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Frequency response: 50 to 16,000 Hz
|
The supercardioid e 906 instrument microphone was especially designed for
guitar amplifiers, but it is also an excellent choice for percussion and brass
instruments.
Features
Lively, full sound
Very fast attack
Flat shape of microphone body perfect for guitar amps
Three adjustable sound characteristics (bright, normal, smooth)
Hum compensating coil
Rugged metal body
Delivery Includes
e 906 microphone
MZQ 100 clamp
Pouch
User manual
Technical Data
Pick-up pattern supercardioid
Frequency response 40...18000 Hz
Sensitivity in free field, no load (1kHz) 2,2 mV/Pa
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 55 x 34 x 134 mm
Weight 140 g
|
Reviews
There are no reviews yet.