| Description |
- Wireless Guitar Amp for Portable Use
- 30W Stereo (20W Stereo with Batteries)
- Transmitter Provides 12 Hours of Play
- Intelligent Standby Conserves Battery
- 5 Amp Characters
- Over 50 BOSS Effects Available
- 6 On-Board Memory Slots
- Stream Music Over Bluetooth or Wired
- Works with BOSS Tone Studio App
- Record Audio to Apps or DAWs from Amp
| Characteristics
- Amplifier type: category AB
- Maximum output power: 120 W
- RMS power: 30 W / 60 W maximum per channel
- Woofer 4 ”aramid fiber
- Tweeter 0.75 ”Silk dome
- Inputs: 3.5 mm stereo mini-jack, USB, RCA L / R, Bluetooth
- Outputs: RCA variable line-out, 3.5 mm mini-jack headphone out
- Input voltage: 110-240 V 50/60 Hz auto-switching
- SNR> 95 dB (typical A-weighted)
- THD + N <0.05% in all power settings
- Crosstalk <50 dB
- Frequency response: 60 Hz-22 kHz ± 1.5 dB
- Input resistance: 5K ohms unbalanced
- Protection: Output current limitation, thermal overheating, temporary on / off protection
|
- Solid State
- 2
- 10W
- 2 x 6.5" woofers
- Yes
- Chorus, Delay, Harmony
- 3-band EQ
- 1 x 1/4" (mic/instrument), 1 x XLR-1/4" combo (mic/instrument), 1 x 1/8" (aux in)
- 1 x 1/4" (line out)
- 1 x Type B
- 1 x 1/8" (headphones/record out)
- 1 x 1/4" TRS (looper,chorus/delay), 1 x 1/4" TRS (reverb, harmony)
- No
- 45-second Looper, Tuner
- USB
- Roland CUBE JAM app
- Black Finish
- 8 x AA Batteries (Alkaline or Ni-MH) / 9V DC power supply (included)
|
- Easily connect your compatible Bluetooth devices for high-quality wireless playback
- Active speaker with a passive slave speaker, with the ability to daisy-chain multiple sets
- 2-way speaker design with flared baffles for a smooth full-range frequency response
- Quick and easy to install in false or suspended ceilings using the built-in dog-ear clamps
- Comes complete with an in-line 12VDC power supply for intuitive use out of the box
| Characteristics
Type: 2.0 powered multimedia speaker system
Amplifier Type: Dual analog class A / B monolithic
Maximum power: 60W (15W RMS / 30W peak per channel)
Drivers 2.75 ″ aramid fiber woofers, 3/4 ″ silk dome tweeters
Entrance : 3.5mm stereo mini-jack, stereo RCA, USB, Bluetooth
Exit : RCA line-out, 3.5mm mini-jack headphone out
Sensitivity: > 95dB
Frequency response -65Hz-22kHz +/- 2.0dB | Bluetooth function
hands-free calling
FM radio
support USB, TF card playback
support AUX audio playback
support cycle charging |
| Content | Boss Katana-Air Overview
The BOSS Katana-Air is a portable combo amplifier that allows you to take 30W of stereo guitar tone with you wherever you may roam. Simply plug the included wireless transmitter into your guitar, dial in your favorite tone (with five models on hand, there’s many to choose from), and you’re ready to go.
If you want, you can load high-quality, BOSS-style effects into your chain utilizing a corresponding app for iOS and Android devices; this app, which gives you full control over the amplifier—as well as access to a bevy of choruses, delays, reverbs, and more—can organize your favorite amp setups and beam them straight into the Katana-Air over Bluetooth. If you want to leave the phone at home, you can load up to six user presets in the amplifier itself, and cycle between them at will.
The included transmitter can be recharged straight from a docking station conveniently located in the amp when not in use. Moreover, it utilizes motion sensing technology to switch the whole rig into standby when you’re not playing, and to wake back up instantly when you are. Lasting approximately 10 hours on eight AA batteries, the rig can rock and/or roll for a while before you need to restock on batteries. Or, you can use the included AC adapter to plug into the wall, if that’s your preference.
Connections are on hand for wired devices by means of an auxiliary input, and a stereo headphone jack lets you practice silently in stereo or record to your favorite app or DAW. For more information, please peruse the features section.
- Wireless guitar amplifier with proprietary BOSS transmitter for guitar
- Low-latency operation
- Custom wireless transmitter plugs into any electric guitar and charges while docked in the amp
- Transmitter provides 12 hours of playing time on a single charge
- Transmitter automatically enters standby mode to conserve the charge when no activity is detected
- Motion sensing transmitter instantly wakes the amp from power-saving standby mode
- Tones derived from the Katana stage amplifier series, with five unique amp characters and access to over 50 BOSS effects
- Six onboard memory slots for storing amp and effects setups
- 2 x 3" speakers for up to 30W of stereo power (20W, battery-powered)
- Edit/organize tones with the BOSS Tone Studio app for iOS and Android mobile devices
- Play along with music streamed wirelessly from a mobile device via Bluetooth
- Amplifier powered by 8 x AA-size batteries or included AC adapter
- Auxiliary input for wired devices
- Headphones/recording output for silent practice and music production
With its Katana sound engine and wireless operation, the Katana-Air facilitates portable playing and practice. When you want to jam at home, there's no need to set up your big rig or rely on the dry, boxy sound of a mini practice amp. Just plug the Katana-Air's transmitter into your guitar and riff with great sound from anywhere in the room! Thanks to its portable size and ability to run on batteries, the Katana-Air is an equally great companion for travel, parties, jam sessions with friends, busking (where legal), and more.
The Katana-Air uses low-latency digital-wireless guitar technology developed by BOSS to provide transparent sound without any lag or dropouts. The included custom wireless transmitter plugs into any electric guitar, and has indicators for power and battery status. A convenient docking port in the amp charges the battery in the transmitter, providing up to 12 hours of total playing time per charge.
The Katana-Air operates in standby mode to conserve energy when idle, and instantly wakes when the transmitter senses motion. This means that you can leave the transmitter connected to your guitar, and then turn the amp on simply by picking up the instrument. Conversely, when you stop playing, the transmitter returns to standby mode to conserve your charge. The transmitter also establishes the best wireless connection automatically when you dock it for charging, so there's no complicated setup required.
Equipped with the same tones and sound-shaping controls found in larger Katana amplifiers, the Katana-Air offers timbres for any style. Five amp characters provide a wide range of tones, from sparkling clean to a custom, high-gain Brown sound evocative of a Marshall stack. There's even an Acoustic character optimized for playing acoustic/electric guitar. The amp also provides integrated access to over 50 BOSS effects, including modulations, delays, and reverb effects optimized for the Katana-Air's stereo speaker system. With six onboard memories, you can store and recall your favorite amp and effects setups at any time.
Available for both iOS and Android devices, a dedicated BOSS Tone Studio app gives you complete control of the Katana-Air right from your smartphone or tablet. You're able to adjust all the amp's panel controls, as well as access effects types and routings solely available from the app. You can also save setups to the amp's memories, organize sound libraries on your device, and download free patch collections directly from BOSS Tone Central. The app corresponds with the amp over Bluetooth
The Katana-Air is a true stereo amplifier with two custom-tuned speakers and capable of delivering up to 30W of total power. Thus, it can give you a big, rich sound for full-range music reproduction as well as guitar amplification. Over Bluetooth, you can stream music from your mobile device and play along with popular songs, backing tracks, YouTube lessons, and more. And when you just want to kick back, the Katana-Air performs double-duty as a high-quality mobile Bluetooth speaker for enjoying tunes from your music library.
The Katana-Air also includes a stereo headphones/recording output with guitar cabinet simulation. This lets you directly record the amp in your favorite app of DAW, or enjoy inspiring stereo sound when practicing quietly with headphones. It's even possible to adjust the cab simulation's mic position with the Air Feel control in the BOSS Tone Studio app.
| PRODUCT DESCRIPTION
Easily fill any space with the power of incredible stereo sound that enlivens the listening experience. A pass-through to ALL your music on any application or device, HD4 offers wired or wireless connections, such as USB input from your PC, Bluetooth aptX-HD from your phone, or your good old-fashioned analog vintage turntable or cassette player.
Complementing Audioengine's old HD series, HD4 wireless speakers offer flexible, high-fidelity sound ideal for smaller spaces. A premium series, with two tuning speakers that offer excellent music playback.
Bringing high-performance HD6 technology into the home along with the convenience of the mid-sized HD3, the HD4 is a perfect combination of the power of sound you like to feel and modern functionality. Covered with precision wood-veneer.
With access to ALL your music on any app or device, HD4 offers wired or wireless connections, such as USB input from your PC, Bluetooth aptX-HD from your phone, or good old-fashioned analog from this vintage turntable or award-winning cassette player. .
It features Bluetooth aptX-HD for premium, wireless extended bandwidth that allows you to quickly and easily connect to stream your existing music services, tune in to your favorite podcasts or listen to carefully edited playlists from your personal music library.
Your music, your way. Wherever you want to hear anything. It is so simple.
Flexibly designed to withstand space constraints, the HD4 is the perfect upgrade, where surfaces are small, easily high-performance. The beautiful and compact design of the HD4 easily fits into any small space, combines with any decor and prepares listeners for both an extensive sound scene and crystal clear display.
Quick and easy installation
No network setup, no passwords, no problems
Flexible playback in any room, from any application or device
High fidelity stereo sound for desktops and small spaces
Modern, compact design that fits and fills any room
AptX-HD Bluetooth extended bandwidth streaming low latency
Analog input for easy turntable connection
Aramid fiber woofer and silk dome tweeter
Built-in power amplifiers wrapped in precise, handmade and ready-made wood-veneer cabinets
In 2005, Audioengine was founded with a simple goal: To build specially designed home music systems that sound great, are easy to use and make people want to listen to music every day.
Each new product gives listeners careful updates and enhancements inspired by all the ways people listen to their music. HD4 is no exception. Made with similar custom elements found in the award-winning HD6 and HD3, the HD4 boasts everything one would expect from an Audioengine product that has been redefined for space music lovers.
Audioengine - Accessible, customizable and absolutely incredible home sound for anyone who believes in the power of music. | With the portable Boss Cube Street 2 by your side, you have the tools you need to deliver your message with confidence in any mobile setting, from musical performances on the street to public speaking events. Wherever you perform, high-quality sound with great projection is essential to capture listeners and stand out from the pack.
Evolved from the best-selling Roland CUBE Street—and newly rebranded with the BOSS name—this battery-driven powerhouse provides rich stereo sound for busking and other mobile gigs. Dual channels allow you to plug in mics and instruments and sound great immediately, with no extra gear to carry around. A vocal harmony function, looper, and effects are also on hand to lift your performances and impress the crowd. And with the optional BT-DUAL Bluetooth Audio MIDI Dual Adaptor, you can wirelessly stream backing tracks and control the Boss Cube Street 2 functions from your phone or tablet.
- Next-generation version of the top-selling mobile amp for street performers
- First model in the CUBE Street series branded with the BOSS name
- ABS injection-molded cabinet for increased durability and reduced weight (4.4 kg/9 lb. 12 oz.)
- Enhanced power output: 10 watts total (5 watts x 2)
- High-quality stereo sound with two high-performance 6.5-inch speakers
- Angled face for optimum monitoring and sound projection
- Mic/Instrument channel with harmony, three-band EQ, and reverb
- Guitar/Mic channel with nine amp types, three-band EQ, chorus/delay, reverb, and tuner
- Looper with up to 45 seconds of stereo recording time
- Automatic harmony function with three modes: unison, high, and higher
- Optional Bluetooth Audio MIDI Dual Adaptor (BT-DUAL) for wirelessly streaming music from a mobile device and editing amp functions with the companion CUBE Street II Editor app
- Record or livestream your audio performances to a computer or mobile device via USB or i-CUBE Link
- Practice and jam with the CUBE JAM app for iOS
- Runs on eight AA alkaline batteries or included AC adaptor
- Eco mode for extended battery runtime (max power output: 5 watts)
- Also available in red
Travel Light with Powerful Sound
Compared to its popular predecessor, the Boss Cube Street 2 is even lighter and more durable thanks to its modern ABS injection-molded design. The output power has been doubled too, giving you 10 total watts of crisp and clean stereo sound to cut through street traffic, train arrivals, and other noise challenges on the gig. In quieter situations where you don’t need as much headroom, kicking in Eco mode reduces the power to extend battery life.
All the Connectivity You Need
With two ultra-versatile input channels, the Boss Cube Street 2 supports all types of musicians and performers. The Mic/Instrument channel features a combo jack for either an XLR balanced mic or an instrument such as a keyboard or Roland’s Aerophone. Equipped with a standard ¼-inch jack, the Guitar/Mic channel provides plug-and-play sound for guitarists with seven acoustic and electric amp types, as well as settings for a line-level instrument or unbalanced mic. And if you ever need to expand your sonic reach, dedicated outputs are available for connecting to a house PA or another Boss Cube Street 2.
Make Your Performances Shine
The Boss Cube Street 2 is packed with features to enhance your sound and bring fresh energy to shows. Each channel provides dedicated three-band EQ and reverb, and there’s a chorus/delay effect on the Guitar/Mic channel. The harmony function on the Mic/Instrument channel creates impressive vocal harmonies that will make audiences wonder where the background singers are hiding. Harmonies are produced as you sing based on the guitar chords you play or a key you set, and you can bring them in and out as needed with an optional footswitch. There’s a built-in looper too, providing a powerful and fun way to create backing tracks on the spot.
From the Street to the World
The Boss Cube Street 2 helps you reach both in-person and global audiences at the same time. Via i-CUBE Link and USB, you can send the amp’s audio output to video, livestreaming, or music production apps for on-the-spot capture. The i-CUBE Link jack provides a mono output and connects to most phones and tablets with the included cable, while USB supports a stereo digital connection to a computer or an iOS device.* *An Apple adaptor may be required to connect an iOS device to the Boss Cube Street 2 via i-CUBE Link or USB.
A Grab-and-Go PA for Everyone
While designed with performing musicians in mind, the Boss Cube Street 2 excels in any situation that requires high-quality sound. It’s easy to move and sets up anywhere, making it perfect for speaking in presentations, workshops, and school events. And with the ability to play music as well—either wired through the aux input or wirelessly with the optional BT-DUAL adaptor—CUBE Street II is ideal for background entertainment and impromptu karaoke performances.
Wireless Expansion
The optional Bluetooth Audio MIDI Dual Adaptor (BT-DUAL) brings even greater creative power to the Boss Cube Street 2. You can wirelessly connect your phone or tablet and jam live with backing tracks or play break music between sets. It also provides connectivity for the Boss Cube Street 2 Editor, a powerful free app for iOS and Android that provides wireless access to a wide range of functions unavailable from the Boss Cube Street 2 panel.
What You Can Do with the Boss Cube Street 2 Editor
When the BT-DUAL adaptor is installed, you can use the Boss Cube Street 2 Editor app to adjust a variety of settings and perfectly tailor the Boss Cube Street 2 for different performances.
- Customize the onboard effects with a wide selection of parameters.
- Swap out the harmony function on the Mic/Instrument channel with a chorus, phaser, flanger, tremolo, or touch wah effect.
- Change the chorus effect on the Guitar/Mic channel to a phaser, flanger, tremolo, or touch wah.
- Set the input source for the looper and extend the recording time to 90 seconds (mono).
- Assign optional footswitches to control a variety of functions.
- Apply a ducking effect to automatically lower the volume of background music when speaking
- Set up the Stereo Link and Stereo Input functions.
- Save custom setups for different gigs as Live Sets.
- Check the current battery level.
- And much more!
Specifications
Rated Power Output
Nominal Input Level
- MIC/INSTRUMENT INPUT: -40 dBu (2 k ohm)/-20 dBu (11 k ohm)
- GUITAR/MIC INPUT:-10 dBu(1 M ohm)
- i-CUBE LINK/AUX IN: -20 dBu (15 k ohm)
Nominal Output Level
- LINE OUT : -10 dBu (MONO)
Speakers
Controls
- POWER switch
- OUTPUT POWER switch (MAX, ECO)
- LOOPER button
- STOP button
- [MIC/INSTRUMENT]
SELECT switch (MIC, INST)
VOLUME knob
HARMONY knob
KEY button
BASS knob
MIDDLE knob
TREBLE knob
REVERB knob
- [TUNER]
TUNER button
- [GUITAR/MIC]
AMP TYPE knob (NORMAL, BRIGHT, WIDE, INSTRUMENT, CLEAN, CRUNCH, LEAD, ACOUSTIC SIM, MIC)
GAIN knob
VOLUME knob
BASS knob
MIDDLE knob
TREBLE knob
CHORUS/DELAY knob (CHORUS, DELAY)
REVERB knob
- [i-CUBE LINK/AUX IN]
i-CUBE LINK/AUX IN knob
Indicators
Connectors
- [INPUT]
MIC/INSTRUMENT jack: Combo type (XLR type, 1/4-inch TRS phone type), balanced
GUITAR/MIC jack: 1/4-inch phone type
i-CUBE LINK/AUX IN jack: 4-pole miniature phone type
- [OUTPUT]
LINE OUT jack: 1/4-inch phone type
PHONES/REC OUT jack: Stereo miniature phone type
- [FOOT SW]
SW 1 HARMONY/MIC/INST jack: 1/4-inch TRS phone type
SW 2 LOOPER/GUITAR/MIC jack: 1/4-inch TRS phone type
- Bluetooth ADAPTOR connector: Dedicated connector
- USB port: USB B type
- DC IN jack
Power Supply
- AC adaptor (DC 9 V)
- Alkaline battery (AA, LR6) x 8
- Rechargeable Ni-MH battery (AA, HR6) x 8
Current Draw
Expected battery life under continuous use
- [OUTPUT POWER switch: MAX (Maximum power output: 10 W)]
Alkaline battery: Approximately 8 hours
Rechargeable Ni-MH battery: Approximately 10 hours (*1)
- [OUTPUT POWER switch: ECO (Maximum power output: 5 W)]
Alkaline battery: Approximately 11 hours
Rechargeable Ni-MH battery: Approximately 14 hours (*1)
*1 When using batteries having a capacity of 2,500 mAh.
* These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
Dimensions
- 414 (W) x 285 (D) x 255 (H) mm
- 16-5/16 (W) x 11-1/4 (D) x 10-1/16 (H) inches
Weight (excluding AC adaptor)
Accessories
- Owner’s Manual
- Leaflet USING THE UNIT SAFELY
- AC adaptor
- Power cord
- Mini cable (4-pole miniature phone type)
Options (sold separately)
- BOSS Bluetooth(R) Audio MIDI Dual Adaptor: BT-DUAL
- Carrying case: CB-CS1
- Footswitch: FS-5U, FS-6, FS-7
* 0 dBu = 0.775 Vrms |
Take your ceiling installation to the next level. Boasting intuitive Bluetooth connectivity, the Adastra BCS52S Ceiling Speakers let you play your music wirelessly with ease. Bluetooth connectivity is switchable, whilst line inputs and outputs let you hook up other sound sources as well as providing simple daisy-chaining capabilities. Combined with their 2-way design and flared baffles, the BCS52S speakers provide you with smooth, high-quality full-range audio for domestic and commercial installations.
The speakers are simple to fit and operate. With integrated dog-ear mounts, you can unobtrusively mount the speakers to false/suspended ceiling tiles with ease. The single active speaker is powered by the included 12VDC PSU, which then drives the other passive slave speaker. And with low-profile magnetic grilles, your speakers can be made to blend with your decor for a subtle and understated look.
In the Box
- 1 x Active Bluetooth Ceiling Speaker
- 1 x Passive Ceiling Speaker
- 1 x In-Line 12VDC Power Supply
- 1 x 3-Metre Speaker Connection Cable
Features
- Ceiling speaker set with switchable Bluetooth connectivity
- Simple playback compatibility with various devices
- One active speaker with a Bluetooth receiver, and one passive slave speaker
- Active speaker boasts an RCA line input and output for daisy-chaining multiple sets
- Each speaker features low and high-frequency drivers plus flared baffles
- Smooth full-range response from 80Hz to 20kHz
- Understated low-profile magnetic grilles
- Dog-ear clamps provide quick and easy installation
- Includes an in-line 12VDC power supply for easy use
- Suitable for domestic and commercial use
Specifications
- Transducers:
- LF Driver: 5.25'' (135mm)
- HF Driver: 0.5'' (12mm) neodymium dome tweeter
- Sensitivity: 89dB
- Dispersion Angle: 160°
- Frequency Response: 80Hz - 20kHz
- Impedance: 4 Ohms (each speaker)
- Bluetooth Version: 5.0
- Mounting Depth:
- Active: 95mm
- Passive: 75mm
- Cutout: 180mm (each speaker)
- Housing Material: ABS plastic
- Power Supply: In-line 100-240VAC/12VDC PSU (included)
- Dimensions:
- Active: 97mm x 205mm
- Passive: 76mm x 205mm
- Weight: 1.78kg (per set)
| THE ABSOLUTE MINI MUSIC SYSTEM
Our HD series is designed for the way people listen to music today - wireless streaming, digital downloads, vinyl, etc. HD3 sets a new standard for compact mini music systems, thanks to its flexibility and ability to play all your music from any device.
REMOVAL OF LOST CONNECTIONS
Connect it to HD3 in any way you want: wireless or wired, digital or analog. Stream your music library, TIDAL, Spotify, Pandora, YouTube, etc. to HD3 from almost anywhere in your home without giving up. Setting up a wireless connection is an aura and only takes a minute. And if you use HD3 on your desktop, connect it with a USB cable. The USB port overrides your computer's built-in low-quality headphone jack for a high-quality listening experience. But if you are not good at USB or wireless, you can still use any audio cable to connect.
YOU JUDGE THE GO-TO SYSTEM
Easy tuning, simple and useful features and wide stereo sound make HD3 your music system. The HD3 is expandable, so if you want deeper bass just plug in your subwoofer. No matter how you listen to music, HD3 covers you.
CONNECT YOUR HEADQUARTERS
The HD3 includes a dedicated high-performance headphone jack so you can listen and not wake up your neighbors. The headphone quality headphone amplifier delivers top sound that drives even the most demanding headphones.
RETRO-FUTURE DESIGN
The HD3 is designed for sound performance, but the speakers obviously need to look good, so we've included wood veneers, aluminum trim and detachable magnetic grilles to match any decor. Available in satin black as well as real walnut and cherry wood at no extra cost if you really want to prove it.
SMALL SPEAKERS THAT IMPRESS
Built-in power amplifiers save space and eliminate the need to connect an HD3 to a stereo receiver or external power amplifier. Simply plug the left speaker into an electrical outlet and connect the speaker cable included on the left to the right speaker. All the internal components of the HD3 are designed and tuned together to give you Audioengine signature sound and a much more efficient system than traditional stand-alone speakers and amplifier. | Andowl QY-H69 Bluetooth wireless Retro Speaker 10W
1. TWS series function, leather hand strap
2. The body is made of automotive paint, and the texture is exquisite.
3. Built-in 1500mAh enough 18650 original battery
4. 10W high power, motherboard with boost
5. Bluetooth playback test at 80% volume
6. Play time: 3-4 hours, charging time: 4 hours (play time varies with volume and audio content)
Bluetooth 4.2 + EDR
Range: 10m
Stereo
Power: 10W
Speaker: with autodyne system 2x5w 4Ohm / 57mm * 2
Signal to noise ratio: >=80dB
Battery: 1500mAh lithium
Play time: 6 hours
Charging time: 4 hours
Response time: 150Hz-18000Hz
Playback: MP3, APE, WMA, FLC, WAV
FM Auto Scan Radio
Supports: TF card up to 32GB, USB stick
AUX input
Input Voltage: 5V
Dimensions: 21.7 * 11.5 * 7.9cm
Weight: 0.741kg
Instructions for use in English
|
Reviews
There are no reviews yet.