| Content |
• Work with smartphones, DSLRs, PCs,
Consumer camcorders etc.
• Ideal for recording on vlogs, video-making and more.
• Compact and portable.
• With cardioid polar pattern.
• No battery required, plug and play.
• 3.5mm TRS and TRRS cable, furry windshield and
carrying pouch included.
The BOYA BY-MM1 is a compact cardioid on camera microphone, only 81mm (3") long and 86gm (3.04oz) heavy, which is very lightweight and easy to carry.
Cardioid Microphone Capturing and Delivering Crystal-clear sound
With a high-quality cardioid directional microphone, it captures the forward sounds and reduces sounds pickup from the sides and back, and delivers crystal-clear audio to your recording device.
Innovative Plug-and-play Universal Shotgun Microphone
The BY-MM1 features a specific circuit that allows you to plug and play without installing any batteries. Just connect BY-MM1 to your camera via the included 3.5mm TRS to TRS cable, or connect it to your smartphone via the provided 3.5mm TRS to TRRS cable and get started.
Custom Shock Mount and Fur Windshield
A hard-wearing shock mount and a suspension structure can minimize unwanted vibration and handling noise effectively. Included a furry windshield, it blocks most of the wind and environment noise.
Durable Compact Microphone Structure
With an all-metal microphone body, only 81mm (3") long and 86gm (3.04oz) heavy, BY-MM1 and its accessories can be stored by the carrying pouch and easy to carry anywhere.
| Transducer: |
Electret Condenser |
| Polar pattern: |
Cardioid |
| Frequency Response: |
35-18KHz +/-3dB |
| Sensitivity: |
-42dB +/- 1dB / 0dB=1V/Pa，1kHz |
| Signal to Noise Ratio: |
76dB SPL |
| Plug: |
3.5mm TRS and TRRS connection |
| Dimensions: |
Φ22*81mm |
| Net Weight: |
86g |
|
Based on models originally developed for use in the broadcast of the Sydney Olympics in 2000, the BP4027 (14.96" long) and BP4029 (9.29" long) Stereo Shotgun models are engineered for high-end broadcast and production use. Both microphones feature independent line-cardioid and figure-of-eight elements configured in an MS (Mid-Side) arrangement with switch-selectable internal matrixing. These innovative microphones allow sound recordists the choice of selecting a left-right stereo output (wide or narrow) via the microphone's internal matrixing system or choosing discreet Mid-Side signals for later manipulation, a flexibility not available from any other manufacturer. A switchable low frequency roll-off filter helps minimize the pickup of unwanted low frequency noise. These phantom-powered models feature a rugged lightweight design and sleek black color scheme, perfect for on-camera use.
Designed for broadcasters, videographers and sound recordists
Compact, lightweight design is perfect for camera-mount use
Independent Line-cardioid and Figure-of-eight condenser elements
Switchable low-frequency roll-off
Switch selection of non-matrixed M-S mode and two internally-matrixed left/right stereo modes
Includes a 0.61 m (24“) cable (5-pin XLRF to two standard 3-pin XLRM connectors)
RoHS compliant - free from all substances specified in the EU directive on hazardous substances
Frequency Response: 30-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Mid: -30 dB (31.6 mV) re 1V at 1 Pa; Side: -34 dB (19.9 mV) re 1V at 1 Pa; LR Stereo: -36 dB (15.8 mV) re 1V at 1 Pa
Impedance: 200 ohms
Maximum Input Sound Level: Mid: 123 dB SPL, 1 kHz at 1% T.H.D.; Side: 127 dB SPL, 1 kHz at 1% T.H.D.; LR Stereo: 126 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Mid: 101 dB, 1 kHz at Max SPL; Side: 101 dB, 1 kHz at Max SPL; LR Stereo: 102 dB, 1 kHz at Max SPL
Signal to Noise Ratio: Mid: 72 dB SPL, 1 kHz at 1 Pa; Side: 68 dB SPL, 1 kHz at 1 Pa; LR Stereo: 70 dB SPL, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 4 mA typical at 48V, each channel
Weight: 142 g (5.0 oz)
Dimensions: 380.0 mm (14.96“) long, 21.0 mm (0.83“) diameter
Output Connector: Integral XLR5M-type
Cable: Dual 0.61 m (24“) shielded two-conductor, terminated in two XLR3M-type connectors
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; AT8135 foam windscreen; 5/8“-27 to 3/8“-16 threaded adapter; protective carrying case
|
The new RODE NTG-1 is a lightweight condenser shotgun microphone, specifically
designed for professional applications within the film, video, television, voice-over and
ENG industries.
The NTG-1 provides an electronically balanced output stage and operates on 48 V to
the P48 standard. The NTG-1 offers wide bandwidth and a controlled polar response
coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it
ideal for mounting directly to video cameras (with optional accessories) or a Boom pole.
The NTG-1 comes complete with mount and windshield. The supplied windscreen effectively
suppresses wind noise when recording outdoors in moderate conditions. Optional accessories
are available for more demanding applications.
SPECIFICATIONS:
Features:
Broadcast sound quality. Low noise circuitry. Condenser transducer. Rugged metal construction.
Low weight: 105 grams approx. . Low handling noise. Supplied with stand mount, zip pouch and
windshield. Designed & manufactured in Australia. Full 2 year guarantee.
Operation power:
The NTG-1 is designed to operate from standard P48 phantom power. The NTG-1 will
operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the
output XLR connector.
Operation output impedance:
The NTG-1 will operate satisfactorily into a load impedance as low as 1 k§?. If a load below
this is used, the output signal level will be reduced. The NTG-1??s output is balanced between
pin 2 (hot), pin 3 (cold) and pin 1 is ground.
Acoustic principle: Line plus Gradient.
Directional pattern: Super-Cardioid.
Frequency range:
20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
Output impedance: 50 ?
Signal noise ratio din iec 651:
76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 18 dB SPL (per IEC651, IEC268-15)
Maximum spl: 139 dB (@ 1% THD into 1 k?)
Sensitivity:
-36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651: 121 dB (per IEC651, IEC268-15)
Power supply voltage: P48 Phantom, 44 V to 52 V
Current consumption: 3.5 mA
Output connection:
3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Weight with battery: 105 g approx.
Dimensions width: 217mm
Dimensions depth: 22mm
Dimensions height: 22mm
| RODE NT G8 Broadcast Quality RF-bias Shotgun Microphone
Based on RØDE's award winning NTG3, the NTG8 is a broadcast quality RF-bias shotgun microphone that exhibits increased directionality across a wide frequency response range. This makes the NTG8 the perfect microphone for film, television, sports and outdoor broadcasting, live performance, and any professional distance miking application.
Like the NTG3, the NTG8 features low self-noise, natural sound without colouration both on and off-axis, and RF bias technology to ensure that it is almost completely resistant to high humidity environments which could cause other condenser microphones to fail.
The NTG8 is finished in matte black and supplied with a specially designed shock mount (SM8) that is engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the microphone. A rugged weatherproof aluminium cylinder is also included, providing ultimate protection for the microphone when in transport or storage. The WSNTG8 windshield completes the package, providing light environmental protection.
Acoustic Principle Line Gradient
Active Electronics RF Bias
Capsule 0.50“
Polar Pattern Hyper Cardioid
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 2Ω
Maximum SPL 124dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 8.2dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -20.0dB re 1 Volt/Pascal (97.50mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Power Options
(44-52V min 2.5mA)
Weight 345.00gm
Dimensions 559.00mmH x 19.00mmW x 19.00mmD
Output XLR | The R?DE VideoMic is a professional grade shotgun microphone. Based on the
latest ?Film industry? technology, the VideoMic is designed specifically for use with
high quality Digital Video Cameras.
The microphone exhibits low noise and an unusually wide bandwidth for its size. It
is ultra lightweight, yet rugged due to it?s ABS construction. The VideoMic is powered
by a standard 9 V battery and offers a Low Battery LED status indicator and a
switchable high pass filter to reduce unwanted low frequency rumble.
The VideoMic attaches to any Camcorder that has the standard camera-shoe fitting
and utilizes a stereo mini jack for audio output.
SPECIFICATIONS:
Features:
Studio recording quality. Rugged fibre-reinforced ABS construction. 9 V battery operation.
Custom designed integral wind shield. Condenser Microphone. Low noise circuitry. Low
handling noise. Integral camera-shoe mount. Designed & manufactured in Australia.
Full 2 year guarantee.
Operation power:
The VideoMic is designed to operate from a 9 V battery (ANSI:1604A or IEC:6LR61).
The battery is conveniently located within the support arm of the microphone. A fully
removable access cover and a 1-way insertion mechanism ensure ease of loading.
The battery will provide more than 100 hrs. of continuous use due to a low consumption
of only 5.0 mA.
Operation output impedance:
The microphone will operate satisfactorily into a load impedance as low as 1 k?.
If a load below this is used, the output signal level will be reduced.
Acoustic principle: Line plus Gradient
Directional pattern: Super-Cardioid
Frequency range:
40 Hz ~ 20 000 Hz selectable HPF @ 80 Hz/12 dB/octave
Output impedance: 200 Ω
Signal noise ratio din iec 651:
74 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 20 dB SPL (per IEC651, IEC268-15)
Maximum spl: 134 dB (@ 1% THD into 1 kΩ)
Sensitivity:
-38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651: 114 dB (per IEC651, IEC268-15)
Power supply voltage:
9 V DC Alkaline Battery (ANSI:1604A or IEC:6LR61)
Current consumption: 5 mA
Battery life: >100 hours
Output connection: Stereo mini jack plug - ?3.5 mm.
Weight: 176 grm.
Dimensions width: 250mm
Dimensions depth: 65mm
Dimensions height: 102mm |
| Manufacturer |
LAB GRUPPEN |
| Warranty |
10 Years Gurantee |
| Channels |
Dual Channel |
| Resistance ohms |
8Ω / 4Ω |
| Resistance ohms |
2Ω |
| DSP |
Yes |
| Power (8 ohms/Watt RMS) per channel |
300 |
| Power (4 ohms/Watt RMS) per channel |
600 |
| Power (2 ohms/Watt RMS) per channel |
500 |
| Weight (kg) |
4.6 |
|
Reviews
There are no reviews yet.