| Content |
The BLU-3 and BLU-6 wall panels are simple controllers which allow the designer to provide level control and source selection or preset recall in a simple wall-mounted panel.
These controllers connect to the control ports on the rear of any BLU-16, BLU-32 or BLU-80 device.
The BLU-3 offers a rotary fader and a five-way switch. The switch could select system presets (configurations specific to times of the day for example) while the rotary control could be assigned to act as a zone volume control.
The BLU-6 offers an eight-way switch, but instead of a rotary volume control has a pair of spin or up/down buttons, enabling the same level parameter to be mapped onto other controllers preventing a jump in audio level when the control is adjusted
The switches on both units have blank areas for marking the switch functions, either directly onto the white area, or on self-adhesive labels. |
| | - CONVENIENT INSTALLATION AND CONSTRUCTION WITHOUT NEED OF ID SETTING. - SELECTION OF VARIOUS CHIME BROADCASTINGS FOR MIC BROADCASTING (PRE/POST). - CONVENIENT PRIORITY BROADCASTING. - ADOPTION OF OUTPUT SIGNAL LEVEL DISPLAY. - ADOPTION OF RS-422 COMMUNICATION METHOD TO SUPPORT A LONG DISTANCE. | | | | | | | | Audio Output | 0dB(Balanced) | | Audio Input | Paging & RM MIC & LM MIC | -50dB(Balanced) | | BGM(Main & Local) | -10dB(Balanced) | | Tone Control (100Hz & 10kHz) | Paging MIC | ± 10dB | | Audio Output | ± 12dB | | Frequency Response | BGM | ± 3dB | | MIC | ± 3dB | | S / N | BGM | Better than 75dB | | MIC | Batter than 65dB | | T.H.D. | BGM | Less than 0.05% | | MIC | Less than 0.05% | | Priority Control | Paging MIC > DRP > RM1> RM2 > RM3 > RM4 > LM-8000 > Main BGM | | Phantom Power | DC 24V | | Serial Interface | Communication Speed | 9600bps | | Communication Distance | Maximum 300m(UTP CAT%) | | Operation Temperature | -10℃ ~ +40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | | Weight(SET) | 1.5kg / 3.2lb | | Dimensions(SET) | 200(W) x 70(H) x 206(D)mm 7.9(W) x 2.8(H) x 8.1(D)in | | ※ Specifications and design subject to change without notice. | | | |
|
The RM-300MF Fireman's Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman's Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys.
|
Power Source
|
24 V DC (operating range: 15 - 40 V DC, supplied from the VM-3000 system)
| |
Current Consumption
|
120 mA (RM-300MF), 660 mA (with 3 RM-320F connected)
| |
Frequency Response
|
200 Hz - 15 kHz
| |
Distortion
|
1 % or less
| |
S/N Ratio
|
55 dB or more
| |
Microphone
|
Unidirectional dynamic microphone with talk key, compressor (on/off switchable)
| |
Volume Control
|
Microphone volume control, Buzzer volume control
| |
Connection Cable
|
Main line: Shield CPEV cable (each one pair of Audio line, Data line, Power supply line)
or Category 5 Shielded Twisted-Pair straight cable for LAN (CAT5-STP), M3 screw terminal
| |
Maximum Cable Distance
|
Total 800 m (874.89 yd)
| |
No. of Connectable RM-320F
|
Max. 3 units
| |
Operation
|
Emergency key, Evacuate key, Alert key, Emergency reset key, CPU switch, Reset switch
| |
Indicator
|
Power indicator, Emergency indicator, Communication failure indicator, CPU OFF indicator,
Evacuation announcement indicator, Alert announcement indicator,
Emergency reset indicator, Microphone in-use indicator,
Emergency broadcast equipment in-use indicator
| |
Operating Temperature
|
-5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)
| |
Operating Humidity
|
5 % to 95 %RH (no condensation)
| |
Finish
|
ABS resin, blueish gray (PANTONE 538 or its equivalent)
| |
Dimensions
|
200 (W) × 215 (H) × 82.5 (D) mm (7.87" × 8.46" × 3.25“)
| |
Weight
|
1.1 kg (2.43 lb) (with wall mounting bracket unit)
| |
Accessory
|
Wall mounting bracket unit…1, Wall mounting screw…2
|
|
| | - AUTOMATIC CHARGING Tapered charging circuitry charges your backup batteries without risk of overcharging. - EASY BATTERY MONITORING Integrated digital volt meter and digital ampere meter allow you to monitor the status of your batteries. | | | | | | | PB-607 | | Battery Requirement | 24V DC | | Starting Current | 3A Max. | | Charge Complete Voltage | 27.3V ±10% | | Operation Temperature | -10℃~+40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | | Power Consumption | 130W | | Weight(SET) | 7Kg/15.4Ib | | Dimension(SET) | 482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in | | | |
|
*Convenient Priority Broadcasting
*Convenient Installation and Construction without ID Setting
*RS-422 Communication between RM-500 and Z-500
*21 Zone Paging Selection
*Output Signal Level Display
*Multi Chime Options
*Weight: 1.6kg/3.5Ib
*DImensions(W×H×D): 200×206×70mm/7.9×8.1×2.8in
|
Music Program Selector 1-6 with Relay
Toa - 100V installation |
Reviews
There are no reviews yet.