BSS FDS-336 MINIDRIVE Digital Speaker Processor

Discontinued

1,562.40 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: Discontinued Discontinued SKU: FDS336MINIDRIVE Category:
Ψηφιακός επεξεργαστής ηχείων δύο εισόδων και έξι εξόδων, δυναμική περιοχή 108dB, equalization σε κάθε είσοδο και έξοδο, φίλτρα Bessel, Butterworth, Linkwitz-Riley και Whise works, έως και 37 επιλεγόμενα φίλτρα, delay έως 628miliseconds στις εισόδους και 635miliseconds στις εξόδους με διαβάθμιση 20 microseconds.

 

Read more

Ψηφιακός επεξεργαστής ηχείων δύο εισόδων και έξι εξόδων, δυναμική περιοχή 108dB, equalization σε κάθε είσοδο και έξοδο, φίλτρα Bessel, Butterworth, Linkwitz-Riley και Whise works, έως και 37 επιλεγόμενα φίλτρα, delay έως 628miliseconds στις εισόδους και 635miliseconds στις εξόδους με διαβάθμιση 20 microseconds.

Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “BSS FDS-336 MINIDRIVE Digital Speaker Processor”

Your email address will not be published. Required fields are marked *

Quick Comparison

BSS FDS-336 MINIDRIVE Digital Speaker Processor removeARX EC-2 STEREO 2WAY-MONO 3WAY 24dB ACTIVE CROSSOVER removeLAB GRUPPEN NLB60E Processor Link Bridge removeDBX VENU360 Digital speaker processor 3 IN x 6 OUT removeOMNITRONIC DXO-48E Digital Controller - stereo active crossover 4 inputs - 8 outputs, incl. software removeDYNACORD DSP-244 DSP Controller Speaker System remove
NameBSS FDS-336 MINIDRIVE Digital Speaker Processor removeARX EC-2 STEREO 2WAY-MONO 3WAY 24dB ACTIVE CROSSOVER removeLAB GRUPPEN NLB60E Processor Link Bridge removeDBX VENU360 Digital speaker processor 3 IN x 6 OUT removeOMNITRONIC DXO-48E Digital Controller - stereo active crossover 4 inputs - 8 outputs, incl. software removeDYNACORD DSP-244 DSP Controller Speaker System remove
Image
SKUFDS336MINIDRIVEEC-2NLB60EDBX VENU360DXO-48EDSP-244
Rating
Price 1,562.40 incl. GR VAT 422.88 incl. GR VAT 1,362.75 incl. GR VAT 1,154.00 incl. GR VAT 590.00 incl. GR VAT 1,598.89 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 3 left in stock (can be backordered)

Available on backorder

AvailabilityOut of stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 3 left in stock (can be backordered)Available on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 4 analog inputs and 8 analog outputs (XLR)
  • Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
  • Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presets
  • Up to 30 user presets storable in the device via software
Content

Ψηφιακός επεξεργαστής ηχείων δύο εισόδων και έξι εξόδων, δυναμική περιοχή 108dB, equalization σε κάθε είσοδο και έξοδο, φίλτρα Bessel, Butterworth, Linkwitz-Riley και Whise works, έως και 37 επιλεγόμενα φίλτρα, delay έως 628miliseconds στις εισόδους και 635miliseconds στις εξόδους με διαβάθμιση 20 microseconds.

The ARX EC-2 is a flexible yet affordable 24 dB per octave Phase Correct active crossovers.
It has 2 modes of operation; as either Stereo 2 way or a Mono 3 way units, with a switch on
the back panel selecting either mode.

Features
Ultra low noise circuitry
Totally phase aligned at crossover point
Switchable Dual Channel 2 way or Single Channel 3 way
Unique 'semi-fixed' crossover point
24dB per octave (Fourth Order) Linkwitz-Riley filters
Separate Summed Mono Output
Balanced Inputs and Outputs
Built in High Pass filters
Intuitive, 'user friendly' layout
Flawless performance in any audio environment

Tamper-Proof Crossover Points
The crossover points are determined internally by the value of 4 resistors per channel; changing
the resistor value changes the crossover point. This 'semi fixed' method avoids the pitfalls of
externally adjusted crossover points, making the crossover points tamper-proof once they are set.
Idle fingers can't fiddle with the crossover points and create havoc with the system!
As a handy guide, a list of common crossover points and their corresponding resistor values are
printed inside the unit's lid, and also set out in the Owner's Manual.
On the front panel are level controls for Low and High in dual channel 2 way mode, and Low, Mid
and High in single channel 3 way mode, with corresponding Outputs on the rear panel.

Balanced Inputs and Outputs
EC-2 has Balanced Inputs and Outputs, on XLR connectors.
The EC-2 also has an additional summed Mono Low output, for applications that need a Mono Low
feed (e.g. Left and Right full-range plus a single Sub Bass speaker).
High Pass Filter
There is also a preset 30 Hz HighPass filter to remove unwanted subsonics which can damage speakers
and waste amplifier power.
In addition, each output has up to +6 dB of gain available, to compensate for amplifiers and speakers of
differing sensitivities.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240VAC, and is connected to the unit via a standard
IEC connector, with built-in fuse and voltage change switch.
Uncompromising Audio Quality
Innovative circuit design is pointless unless it delivers stunning sound quality, and here the EC-2 excels.
It has been designed for uncompromising audio quality, and to achieve this, Linkwitz Riley 24dB (Fourth
Order) state variable filters are used throughout, ensuring a smooth Phase Correct transition through the
crossover region.
From Stage Monitors to Studio Monitors, from Front of House to the Front room of your House, the ARX
EC-2 is a crossover that is suited to any application that requires flawless, transparent sound.
You'll never compromise on Quality when you choose ARX

T E C H N I C A L S P E C I F I C A T I O N S

Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms
Input Headroom + 21 dB
CMRR >45 dB, 20 Hz-20 KHz
Output Impedance Balanced 300 ohms, Unbalanced 150 ohms
Output Level (Max) + 21dB
Frequency Response 30Hz-20KHz +or- 0.5dB
Note: 30 Hz is a function of the High Pass filter
Signal to Noise ratio (Controls at Unity) -90 dB Unweighted, -93 dB 'A' weighted
Distortion 004% THD,0dB,1KHz
Dynamic Range 111 dB
Power Requirements 100/120 V AC, 220/240 V AC
Weight 5 lbs/2.2 Kg
Dimensions 19“W x 13/4“H x 6“D, 482 x 44 x 155mm
Input Connector type XLR
Output Connector type XLR
Crossover point frequencies are changed internally by varying the value of 4 resistors
per channel.

Front Panel Controls
Low and High Output controls for 2 way mode
Low, Mid and High Output controls for 3 way mode
Marker panels for labelling crossover assigns
2 way/ 3 way status LEDs
Rear Panel
Balanced XLR Inputs and Outputs
Additional summed mono Low output
2 way / 3 way mode switch

Lab Gruppen NLB 60E
The NomadLink network provides remote monitoring, control and power sequencing functions for multiple C Series or FP+ amplifiers. Indeed up to 16 NLB 60E network bridges, each monitoring up to 60 amplifiers may be accommodated in one system. Easy setup, redundancy, and minimum maintenance were bywords when developing this network format.

NomadLink is a closed-loop, daisy-chained network topology with the NLB 60E providing the bridge to the familiar world of Ethernet/LAN. NomadLink reduces installation time and cost significantly, includes redundancy during operation by design and simplifies the location of faults or system abuse.

NomadLink together with the associated DeviceControl software allows the subnets’ architecture to be automatically uploaded even without individual IP addresses in the amplifiers. All in all, it is the fastest and easiest monitoring and control network on the market today.

Specifications:

Network Connectors:
   * Nomadlink Out: EtherCon housed RJ45
   * Nomadlink In: EtherCon housed RJ45
   * Ethernet rear-panel: EtherCon housed RJ45
   * Ethernet front-panel: Standard RJ45
General Purpose Inputs (GPI):
   * One Voltage sensing input: Two pole Phoenix
   * Two contact closure inptus: Two pole Phoenix
Front Panel Indicators:
   * Front operation locked: Yellow LED
   * Fault warning: Red LED
   * Amplifier subnet muted: Red LED
   * NomadLink network connected/activity: Blue LED
   * Ethernet connected: Orange LED
   * Ethernet Activity: Yellow LED
2 x 16 Character display: White text, Blue background
Navigation and Adjust keys: Yes, x 6
Subnet Power on/off keys: Yes, x 2
Power: 100 to 240 VAC, 50 to 60 Hz (auto-select)
Power consumption: Finish: Anodized aluminum front, Plated and painted steel chassis
Approvals: CE, CSA
Dimensions (W x H x D): 19" x 1.73" x 8.2" (483 x 44 x 208 mm), 1 RU
Weight: 5 lbs. (2.25 kg)

The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbxʼs proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.

Digital stereo active crossover with 4 inputs and 8 outputs, incl. software .

  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 4 analog inputs and 8 analog outputs (XLR)
  • Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
  • Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presets
  • Up to 30 user presets storable in the device via software
  • 5 menu languages selectable (German, English, French, Spanish, Dutch)
  • Alphanumeric LCD screen with 2 lines of 16 characters each
  • Input sensitivity digitally adjustable
  • Inputs and outputs with 4-digit LED level meter as well as clip and limit LED indicator
  • Mute switch with LED indicator per output
  • 7-band parametric EQ per output
  • Up to 7 ms signal delay adjustable for the outputs
  • Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
  • Switchable phase
  • Lock function for prevents undesired changes to settings
  • Rack installation, 1 U
  • Windows XP, Vista, 7, 10 and Mac OS X 10.5.8 and better
  • Digital signal processor
  • The device can be connected via USB to the PC in connection with DXO Software The firmware can be updated via the PC connection
  • (19") 48.3 cm rack installation 1 U
Power supply: 100-240 V AC, 50/60 Hz 6 V DC 800 mA
Power connection: Mains input via Coaxial power connector (M) power supply cord with AC adapter (provided)
Frequency range: 10 - 22000 Hz
THD: <0,005 % at 1 kHz
DSP: Digital signal processor
Crossover frequency: 20-20000 Hz
Impedance: Input 10 kOhm Output 50 Ohm
Gain: Output: -50 dB to +12 dB
Filter: Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct
Delay: 0 - 7 ms
Dynamic range: Input: 114 dB Output: 110 dB
Sample rate: 48 kHz
Connections: Input: line via 4 x 3-pin XLR Output: line via 8 x 3-pin XLR
Max. level: Input: +22 dBu Output: +9 dBu
USB port: Typ B
PC connect: DXO Software via USB, firmware can be updated
Housing design: (19") 48.3 cm rack installation 1 U
Dimensions: Width: 48,3 cm Depth: 22,3 cm Height: 4,45 cm
Weight: 1,90 kg
 

Providing 48-bit filter algorithms, 24-bit AD/DA conversion and a dynamic range of 115 dB, the DSP 244 sets new standards for digital loudspeaker controllers and processors. The DSP 244 is an universal Digital Sound System Processor that provides 2 inputs and 4 outputs; plus internal summing of the inputs 1 and 2. Via matrix it is possible to assign the outputs to any input or to the sum of the inputs. It is further possible to establish the following configurations: Stereo or Dual 2-Way systems, 3-Way + Direct and 4-Way systems, each with Mono Subchannel, but also full range systems. High and low-pass filters are provided for the frequency crossover functions in all operation modes. The selection includes Linkwitz-Riley, Butterworth and Bessel type filters with switchable slopes between 6, 12, 18 and 24 dB/oct. A huge number of additional filters offers extremely flexible correction of the frequency response. Each input incorporates a 5-band equalizer, allowing to assign high and low-pass, high and low-shelving or parametric peak-dip filters to its individual filter sections. Next to the frequency crossover filters, four additional filters are employed in each output channel, which also can be set to work as high or low-pass, high or low-shelving filters, parametric peak-dip filters, or all-pass filters. Additional filtering is provided through 2. order high-passes for the realization of B-6 alignment, or special LPN-filters (Low-Pass Notch filters) for correcting the frequency and phase responses of optimally vented woofer cabinets. Each channel additionally provides a delay, a polarity switch, a programmable level control and a digital compressor / limiter while the master delays are located in the input channels. Datasheets / ManualsBrochure (309KB)

Mains voltage 90 - 250 V AC / 50 - 60 Hz Power consumption 20 watts Safety class I Inputs 2 x XLR IN, electronically balanced, transformer optional available 2 x XLR OUT (Direct Out) Input voltage (nominal) 1.55 V / + 6 dBu Max. input voltage 24.5 V / + 30 dBu Input impedance 20 kohms Common mode rejection > 40 dB AD-conversion 24-bit, Sigma-Delta, 128 times oversampling, linear phase Outputs 4 x XLR OUT, electronically balanced Output voltage (nominal) 1.55 V / + 6 dBu Max. output voltage 8.7 V / + 21 dBu Output impedance

Weight3.00 kg5.00 kg2.25 kg2.00 kg2.25 kg5.00 kg
DimensionsN/AN/AN/AN/A52.5 × 25 × 8 cmN/A
Additional information
Weight 3.00 kg
Weight 5.00 kg
Weight 2.25 kg
Weight 2.00 kg
Weight 2.25 kg
Dimensions 52.5 × 25 × 8 cm
Weight 5.00 kg