| Description | | PA amplifier with MP3 player and BLUETOOTH | | | | Powersoft X4 innovates and evolves the concept of the amplification platform through the integration of a worldwide compatible three-phase power supply and a fully-featured DSP.
The complete digital audio signal management system based on ARM Cortex A-8 processor and TI C6000 DSP platform heralds new and innovative level of signal processing, providing routing and mixing, multi-stage equalization with raised-cosine, IIR and FIR filters, delay up to 2s in input processing and 100ms for time alignment, gain and polarity adjustment, crossover, peak limiters, TruePower™ limiters, and Active DampingControl™.
The power supply permits worldwide AC acceptance and direct connection to any regional power line configuration: it is suitable for Single Phase, Bi-Phase, or Three Phase operation from 85 VAC up to 440 VAC without the need for manual selection. True Three Phase load balancing is directly achievable by the unit without any complex load assignment in the power distribution system design. |
| Content | Acoustic Combo
- Power: 60 W
- Equipped with: 1x 8" Turbosound speakers
- 2 Channels
- Effects section with PAN controller: CH1 and CH2
- Klark Teknik effects processor with 16 effects
- DI Out XLR
- Line Out jack
- FX Send
- Tuner Out
- Headphone output
- AUX In: TRS
- Dimensions (H x W x D): 275 x 327 x 237 mm
- Weight: 6.9 kg
- Channel 1:
- 6.3 mm Jack input
- High / low impedance switch
- “Color" switch
- Controls for gain, bass, middle and treble
- Channel 2:
- Combined XLR / jack with optional 48 V phantom
- Line / Mix switch
- Controls for gain, bass and treble
Further information
| Power in Watts |
60 |
| Speaker size |
1 x 8“ |
| Channels |
2 |
| Reverb |
Yes |
| Effects Unit |
Yes |
| External FX Loop |
Yes |
| Microphone Input |
Yes |
| Line Input |
Yes |
| Battery Operation |
No |
| Footswitch Connector |
No |
| Incl. Footswitch |
No |
|
- Speaker output 70/100V or 4/16 Ohm
- Output power 350 W RMS
- Six separate zone volume control
- Control display with USB / SD card inputs
- Three microphone inputs
- Three auxiliary inputs
- One aux output
- Priority microphone with mute function
- Individual volume control, low and high tone control
- Output circuit shorting protection
- Remote control included
- Dimensions: 480 x 380 x 88 mm
|
Vox VX50AG, acoustic amplifier, 50W power, Nutube 6P1 technology, 8 inch speaker with tweeter, 2 separate channels (XLR/jack), each channel with 3-band eq, balanced XLR inout with phantom power (15V) and reverb, jack input with reverb and chorus, phase switch, aux-in, line-out, headphones output, power supply included (DC 19V), dimensions 354x208x313mm, weight 4,1 kg. |
THR5A is optimized for use with electric-acoustic and Silent Guitars. Utilising advanced modeling technologies developed by Yamaha, THR5A offers simulations of classic tube condenser and dynamic mics combined with studio-grade effects to create recording-studio tone direct from your guitar and wherever you are.
Power 10 Watt ( 2 x 5W) Driver 2 Effects 11 Channels 1 Outputs Ηeadphones Inputs Guitar, Auxiliary In Tuner Yes ( Chromatic ) Controls Mic Type, Blend / Gain, Master, Tone, Effect, Delay / Reverb, Volume, Tap / Tuner Dimensions ( W x H x D ) 27.1 x 16.7 x 12 cm Weight 2 kg
|
- Speaker output: 4/8/16 ohm - 70V/100V
- Power output: 4*120W RMS
- 4 MIC/LINE input channels with GAIN, 2-band EQ and VOLUME control
- PHANTOM power on channel 1 and 2
- Channel 1 with PRIORITY switch, auto-mute other input channels
- 4 output channels with 3-band EQ, VOLUME controllers and MUTE switches
- SIREN input priority
- 4 monitor speaker output selectable
- Power supply: AC230V/50Hz or DC24V
- Remote control included
- Dimensions: 480 x 380 x 88 mm
|
| General |
| Output power per channel |
| Output power per channel |
5200 W @ 2 Ω |
3000 W @ 4 Ω |
1600 W @ 8 Ω |
| Bridge mode |
|
10400 W @ 4 Ω |
6000 W @ 8 Ω |
| Max output voltage / current |
| Max unclipped output voltage @8 Ω |
|
|
175 Vpeak |
| Current |
|
|
130 Apeak |
| AC main power |
| Power supply |
Universal, regulated switch mode with PFC (Power Factor Correction) |
| Nominal power requirement |
|
|
100-240 V ±10%, 50-60 Hz |
| Operating voltage |
|
|
90 V – 264 V |
| Power consumption |
| Idle |
|
|
<100 W |
| Max |
|
|
<3000 W |
| Operating temperature range |
|
|
0° – 35° C – 32° – 95° F |
| Thermal dissipation |
| 1/8 of max output power @ 8 Ω |
|
115 V: 1127BTU/h |
230 V: 1058BTU/h |
| 1/4 of max output power @ 8 Ω |
|
115 V: 2124BTU/h |
230 V: 1639BTU/h |
|
Reviews
There are no reviews yet.