Content |
Need big sound, slamming bass and audiophile extension, but donʼt want to see where it comes from? The ISW-4 in-wall subwoofer is for you. Two long-throw 200mm (8in) drivers allow it to move the large volumes of air needed for high-quality low-frequency output. The speaker is housed in its own sturdy back box for rock-solid stability and minimum sound bleed, and is powered by the SA250, a separate audiophile-standard 250W Class D amplifier. |
Dimensions | Metric :10-5/16” W x 15-3/4” D x 12-7/8” H | 26.2 x 40.0 x 32.7 cm
Driver Complement :One high-definition 8" woofer pressure coupled to one 8" low bass radiator.
Frequency Response :20 Hz – 150 Hz
Internal Amplifier Power :300 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Low Level Inputs :One LFE input (for SW preout only)
High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available with high level inputs only
Available Finishes :Matte Black; Matte White
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Packaging :Packaged individually or as part of ProCinema 800 system
Weight | Metric :26 lbs | 11.8 kg
Warranty :5 Years; 3 Years for Amplifiers
| Product Series Subwoofers
Speaker Type Subwoofer
Frequency Range (+/-3 dB) [Hz] 28 - 190
Maximum SPL [dB] 112
Crossover Frequency [Hz] 40 - 120 Hz
Low Frequency Driver 1 x 12" long stroke Polymere Aluminimum
Enclosure Type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 36.0
Max. Amplifier Power Output [RMS watt] 220
Continous IEC Power Output [RMS watt] 170
Input Impedance [Ω] 25K
Connection input(s) Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding No
Recommended Placement Floor
Near wall or corner
Recommended Distance From Wall [cm] > 5
Functions Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W] 250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm] 370 x 340 x 380
Weight [kg] 14.7
Accessories Included Manual
Rubber Bumpers
Spikes M6
Finish Black Ash Vinyl
Light Walnut Vinyl
White Vinyl |
Crossover Tuning
Mushrooms
Description Active closed-box subwoofer system
Drive unit ø250mm (10 in) paper/Kevlar® cone long-throw
Frequency range -6dB at 18Hz and 25/140Hz adjustable (EQ at A)
Frequency response ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Bass Extension -6dB at 18Hz (position A)
-6dB at 23Hz (position B)
-6dB at 28Hz (position C)
Amplifier Power output: 500W
Rated power consumption: 98W / 1W standby
Input impedance: 33kΩ
Signal / noise: >90dB
Functions: Input level (line in)
Input level (speaker in)
Low-pass filter frequency (line in only)
Low-pass filter bypass
Bass extension
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker in (Binding post)
12v trigger (3.5mm jack)
Low-pass filter
Active 4th-order, variable cut-off frequency
Dimensions Height: 325mm (12.8 in) not including feet
Width: 325mm (12.8 in)
Depth: 375mm (14.8 in) including grille and controls
Net weight 15.5kg (34.4 lb)
Finishes Matte Black
|
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment Low Frequency Limit: 18 Hz Upper Frequency Limit: 40 - 120 Hz Variable Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable) Amplifier Power Output 650 watts Continuous. 1200 watts (peak) Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu) Equalisation 4 Settings (Off/Music/Movie/Impact) Phase Control 0-90-180-270 degrees Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed Digital Volume Level -60 to +10dB in 1dB increments Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension 3” long throw voice coil 12V Trigger Input 3.5mm mono jack socket Connections Stereo RCA in/out LFE in/out 12V Trigger in (3.5mm mono jack) LEO* - 3.5mm Microphone input jack (microphone supplied) Input Impedance 20 kohms Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches) Grille Depth 28 mm (1 1/8 Inches) Weight (unpacked) 35.3 kg (77.6 lbs) Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset) Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant) Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific) IR Remote Control Code NEC SH6122 AVAILABLE IN SIX COLOR FINISHES
|
Type Advanced YST II and QD-Bass Subwoofer
Driver 25cm(10'') cone
Dynamic Power 250 W
Frequency Response 20-160 Hz
Advanced YST Advanced YST II
QD-Bass Technology Front-firing
High-Efficiency Power Amplifier Yes
Linear Port Yes
BASS (Bass Action Selector System) Yes
Standby Power Consumption 0.3 W
Dimensions (W x H x D) 380 x 368 x 420 mm
Weight 18.5 kg
|
Reviews
There are no reviews yet.