Content |
Need big sound, slamming bass and audiophile extension, but donʼt want to see where it comes from? The ISW-4 in-wall subwoofer is for you. Two long-throw 200mm (8in) drivers allow it to move the large volumes of air needed for high-quality low-frequency output. The speaker is housed in its own sturdy back box for rock-solid stability and minimum sound bleed, and is powered by the SA250, a separate audiophile-standard 250W Class D amplifier. |
Dimensions | Metric :10-1/4” W x 10-1/4” D x 10-1/4” H | 26.0 x 26.0 x 26.0 cm
Driver Complement :One high-definition 7-1/2" long throw woofer, pressure coupled to two 7-1/2” low bass radiators
Frequency Response :16 Hz – 200 Hz
Internal Amplifier Power :650 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :5 way binding posts
High Level Outputs :5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz:
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :25 lbs | 11.3 kg
Warranty :5 Years; 3 Years for Amplifiers |
imensions | Metric :14-1/4” W x 14-1/4” D x 14-1/10” H | 36.2 x 36.2 x 35.8 cm
Driver Complement :One high-definition 10" long throw woofer, pressure coupled to two 10” low bass radiators
Frequency Response :13 Hz – 200 Hz
Internal Amplifier Power :1500 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :70 lbs | 31.8 kg
Warranty :5 Years; 3 Years for Amplifiers
|
The ASW610 subwoofer presents a very happy medium between the more diminutive ASW608 and the all-out power of the ASW610XP. Its long-throw 250mm driver allows the ASW610 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamming bass, drum kicks, and special movie effects. Deformation is minimised; bass precision, power and enjoyment are maximised.
Description | Active closed-box subwoofer system |
---|
Drive unit | ø250mm (10 in) paper/Kevlar® cone long-throw | Frequency range | -6dB at 20Hz and 25/140Hz adjustable (EQ at A) | Frequency response | ±3dB 27Hz – 40/140Hz adjustable (EQ at A) | Bass Extension | -6dB at 20Hz (position A) |
| -6dB at 25Hz (position B) |
| -6dB at 30Hz (position C) | Amplifier |
| Power output: | 200W | Rated power consumption: | 40W / 0.5W standby | Input impedance: | 33kΩ | Signal / noise: | >90dB | Functions: | Input level (line in) |
| Input level (speaker in) |
| Low-pass filter frequency (line in only) |
| Low-pass filter bypass |
| Bass extension |
| Bass roll-off alignment |
| Auto sense on/standby |
| Phase switch | Inputs: | Line In (RCA Phono) |
| Speaker in (Binding post) |
| 12v trigger (3.5mm jack) |
| Low-pass filter |
| Active 4th-order, variable cut-off frequency | Dimensions | Height: 310mm (12.2 in) not including feet |
| Width: 310mm (12.2 in) |
| Depth: 375mm (14.8 in) including grille and controls | Net weight | 12.5kg (27.6 lb) | Finishes | Black Ash Vinyl |
| Red Cherry Vinyl | |
Dimensions | Metric :10-5/16” W x 15-3/4” D x 12-7/8” H | 26.2 x 40.0 x 32.7 cm
Driver Complement :One high-definition 8" woofer pressure coupled to one 8" low bass radiator.
Frequency Response :20 Hz – 150 Hz
Internal Amplifier Power :300 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Low Level Inputs :One LFE input (for SW preout only)
High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available with high level inputs only
Available Finishes :Matte Black; Matte White
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Packaging :Packaged individually or as part of ProCinema 800 system
Weight | Metric :26 lbs | 11.8 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Dimensions | Metric :12” W x 17-7/8” D x 14-7/16” H | 30.5 x 45.4 x 36.7 cm
Driver Complement :One high-definition 10" woofer pressure coupled to one 10" low bass radiator.
Frequency Response :18Hz – 150 Hz
Internal Amplifier Power :300 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Low Level Inputs :One LFE input (for SW preout only)
High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available with high level inputs only
Available Finishes :Matte Black
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Packaging :One to a carton
Weight | Metric :31 lbs | 14.1 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Reviews
There are no reviews yet.