Content |
The 851W has class XD amplification at 200W into 8 Ohms in stereo mode or 500W RMS per amp in mono bridged mode, separate toroidal transformers for the power amp and input/other circuitry, and terrapin impedance buffering modules. All in all it\'s the best sounding amplifier we have ever made.
Our proprietary Class XD amplification Separate toroidal transformers for power amp and input/other circuitry Our bespoke Terrapin impedance buffering modules – separating amplifier and signal impedance 200W into 8 Ohms stereo mode or 500W RMS per amp mono bridged mode CAP5 protection from DC spikes, overheating and clipping All metal chassis with premium components Remote Control – Compatible with the entire 851 range
Power output – stereo/mono 200W per channel into 8 Ohms 350W per channel into 4 Ohms Power output – bridged mono 500W 8 Ohms 800W 4 Ohms THD (unweighted) < 0.001% 1 kHz < 0.005% 20 Hz - 20 kHz Frequency response 5Hz – 80kHz S/N ratio (ref 1W / 8 Ohn) >90dB (unweighted) Sensitivity – stereo or mono 1.5V rms unbalanced 1.5 + 1.5V rms balanced Sensitivity – bridged mono 0.775V rms unbalanced 0.775V + 0.775V rms balanced Input impedances Balanced input 38 kOhm Unbalanced input 68 kOhm Power amp damping factor > 110 at 1 kHz Max. power consumption 2400W Standby power consumption Standby | High sound quality and sophisticated design based on Yamahaʼs rich experience and high-end model concepts. A HiFi Amplifi er for enjoying excellent sound.
- Yamaha high sound quality, created by rich experience and tradition, and high technological expertise
- Pure Direct Mode for greater sound purity
- Simple and sophisticated design
- Phono MM terminal for vinyl playback
- Screw-type speaker terminals
- Speaker selector and speaker terminals for two systems
- Simple design remote control
- Head phone terminal
|
Overview
Integrated Amplifier with DAC mode
Integrated Amp with USB-DAC for High-res Audio and "Simple & Straight” Engineering Design from High-end Models
- 2 x 160 W (4 ohm) output
- Advanced Ultra High Current (UHC)-MOS Single Push-Pull Circuit Power Amplifier with new Schottky barrier diodes
- DAC Master Clock Design
- USB-B input for High Resolution Audio up to 384 kHz / 32 bit and 11.2 MHz DSD
- Digital isolator to eliminate high-frequency computer noise on the USB-B
- Low noise OLED display for source and sample rate indication
- Analog Mode for pure audio reproduction switching off digital audio circuitry and display
- Advanced AL32 Processing Plus
- Direct Mechanical Ground Construction to minimize unwanted vibration
- Chassis construction with 6 independent blocks to eliminate noises
- Leakage-cancelling-mounted twin transformers
- Main transformer with separate power supplies for analogue and digital circuits
- Wide dynamic range playback, supporting high-resolution audio sources
- High-grade volume control for precise adjustment
- 2 Digital Optical and 2 Digital Coaxial inputs
- High performance MM & MC Phono Equalizer Amp
- Available in Premium Silver
Denon is one of the rare audio brands that continued to actively develop Hi-Fi components and accumulate, refine, and pass down Hi-Fi audio technologies. The 2500NE series, designed for todayʼs age, has been developed by both veteran engineers and talented young engineers who have inherited the Denon technologies and expertise that have been cultivated over many years and decades. And the performance of the PMA-2500NE goes well beyond that of Denonʼs previous PMA-2000 series. With its ultimate built-quality, unique Denon technologies and state-of-the-art connectivity, the PMA-2500NE truly is a masterpiece of sound technology. Thanks to the rear USB-B input and embedded high quality D/A converter, the PMA plays high resolution files up to 384kHz/32bit and DSD up to 11.2MHz from a computer in impeccable sonic quality. For the best performance from analogue inputs, the PMA features an Analog Mode which allows to switch off all unutilized sections like the digital input circuitry or the low noise display for an unaltered audio reproduction.
Channels 2
Digital in: USB-B / optical / coaxial / USB-A / 2 / 2 /
Sample Rate digital In 192 kHz / 24-bit
USB-B DSD Audio Streaming (DoP): DSD2.8 / DSD5.6 |
The 851W has class XD amplification at 200W into 8 Ohms in stereo mode or 500W RMS per amp in mono bridged mode, separate toroidal transformers for the power amp and input/other circuitry, and terrapin impedance buffering modules. All in all it\'s the best sounding amplifier we have ever made.
Our proprietary Class XD amplification Separate toroidal transformers for power amp and input/other circuitry Our bespoke Terrapin impedance buffering modules – separating amplifier and signal impedance 200W into 8 Ohms stereo mode or 500W RMS per amp mono bridged mode CAP5 protection from DC spikes, overheating and clipping All metal chassis with premium components Remote Control – Compatible with the entire 851 range
Power output – stereo/mono 200W per channel into 8 Ohms 350W per channel into 4 Ohms Power output – bridged mono 500W 8 Ohms 800W 4 Ohms THD (unweighted) < 0.001% 1 kHz < 0.005% 20 Hz - 20 kHz Frequency response 5Hz – 80kHz S/N ratio (ref 1W / 8 Ohn) >90dB (unweighted) Sensitivity – stereo or mono 1.5V rms unbalanced 1.5 + 1.5V rms balanced Sensitivity – bridged mono 0.775V rms unbalanced 0.775V + 0.775V rms balanced Input impedances Balanced input 38 kOhm Unbalanced input 68 kOhm Power amp damping factor > 110 at 1 kHz Max. power consumption 2400W Standby power consumption Standby |
Power Output One Channel Driven :275 watts
Dimensions (Without Brackets, Including Feet) :17-1/16" W x 9-5/8" D x 3-11/16" H (43.34 cm W x 24.45 cm D x 9.37 cm H)
Weight | Metric :28 lbs | 12.70 kg
Dimensions (With Brackets, Feet Removed) :19-1/16" W x 9-5/8" D x 3-7/16" H (41.42 cm W x 24.45 cm D x 8.73 cm H)
Finish :Available in both silver and black
Power Output Two Channels Driven :230 watts each
|
High rigidity metal frame
Shielded high current power supply
• 500VA toroidal transformer
• 80.000uF capacitor bank
• Rubber insulated aluminium feet
• WBT connector on unbalanced input
• Neutrik connector on balanced input
• Fully discrete analogue design
• Onsemi MJL1302/3281 power transistor
• Low overall feedback
• High stability on capacitive loads
• White Gold cable on output connection
• 100W/8Ohm power unit and double the
power on 4 Ohm until 390W on 2Ohm; a
big power reserve that allows to drive any loudspeakers even in a big room.
|
Reviews
There are no reviews yet.