| Content | Professional PAR can with 108 ultra-bright LEDs (36 x red, 36 x green, 36 x blue) and RGB colour system in a sturdy aluminium housing and a beam angle of 25 degrees. Featuring a double bracket, the CLP 56 RGB 10 PS is suitable for use both as a floor PAR and for mounting to cross-beams and bars.
It is actuated either via DMX protocol (3-pole XLR) with three and six control channels, in master/slave mode or in standalone mode (sound control, colour change, solid colours). It is controlled by three buttons and an LED display.
The power consumption of the CLP 56 RGB 10 PS is a mere 20 Watts.
- 108 ultra-bright 10-mm LEDs in RGB
- Beam angle of 25 degrees
- Low power consumption of just 20 Watts
- Operated via DMX, in master/slave or standalone mode
- Double bracket included as standard
- Cooling method: Heat sink
- Conventional, sturdy housing
Specifications
- Product: LED Par Can
- Type: PAR56
- Colour Range: RGB
- Number of LEDs: 108 (36 x red, 36 x green, 36 x blue)
- LED Type: 10 mm
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 4/6-channel selectable
- DMX Functions: RGB, Master Dimmer, Strobe, Sound Control, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 230 V
- Power Consumption: 20 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Polished
- Dimensions (without mounting bracket): 230 x 250 x 260 mm
|
18 x 8W QUAD Colour LED RGBW PAR Can in black housing
Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.
It is operated using four buttons and an LED display on the back.
The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.
There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.
The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.
- Type: Studio PAR 64
- Colour spectrum: RGBW
- Number of LEDs: 18
- LED type: 8 W QUAD colour
- Refresh rate: 5000 Hz
- Beam angle: 25°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin male
- DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
- DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
- Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
- Controls: Enter, Mode, Value Down, Value Up
- Indicators: LED display
- Power supply: 110 V AC - 250 V AC
- Power consumption: 170 W
- Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
- Housing material: metal
- Housing colour: black
Dimensions without mounting bracket
- Width: 230 mm
- Height: 220 mm
- Length: 255 mm
|
LED lighting effects Butterfly, RGBW, with 2x10W common transmitter (4 in 1) Cree Led's. Unlimited combinations of colors. Features Electronic Dimmer, Strobe, works with DMX 512 (8 or 5 channels) or independently with music or Auto or Master / Slave. Index IP20 sealing interior. Exterior finish black. Power consumption: 30W, power supply: 110V -240V, 50-60Hz. Dimensions: 27x28x20cm. Weight: 3kg. Uses: disco, club, bar and party. |
•Voltage: AC100V~240V, 50~60HZ
• Power Consumption: 73W
• LED Quantity: 6x Cool white, 12x Warm white
• Beam Angle: 25°
• IP Grade: IP20
• DMX channels: 5
• Packaging Size: 300*300*380 mm
• Net weight: 3,1Kg
• Gross weight: 4,53Kg
Features
• 3PIN plug DMX in and out
• IEC power plug in and out
• Die-cast aluminium housing
• LED display for easy setup
• Working indoor temperature -20°C~+40°C
• Strobe/Colour temperature selection
|
Info
light source: 12 led luxeon, 1W, declared life 100.000 hours flicker free suitable also for TV studio protection rating: IP20 and IP66 dimmer/strobe: full range dimming synchronized or random strobe effect colour: infinite colours generated by convergent RGB colour beams beam angle: standard 12° various frontal lenses and filters to adjust the beam angle are available upon request (from 30° to 110°) automated functions: 4 different automatic programs of colour changing and fading adjustable execution time program synchronized master/slave ability able to operate the internal programs and their parameters via DMX 512 user interface: binary dip-switches, all functions emulated by DR 1 communication protocol: DMX 512 standard + bi-directional (with DR 1) power requirements: 90-250V 50/60Hz autosensing 0,18A @ 230V - 0,45A @ 115V item codes: 9180 PinLite Led silver.
|
LED spotlight with 18 x 3W Cold and Warm White LED's + motorized zoom KingPAR 6 ZOOM - output: 6.750 Lux @ 1m - with 7-channel DMX-512 protocol - dimmer, strobe, cold white, warm white, color temperature presets, zoom, zoom speed - stepless zoom: 15¡ to 60¡ - master/slave function - power consumption: 90W - metal housing - 4-button, 16-section display - passive cooling, no noise - also suitable as a stand-alone spotlight thanks to 2 adjustable mounting brackets - 3pin DMX input & output - IEC power input & output - dim. (LxWxH): 300 x 300 x 380mm - net weight: 3.8kg - for indoor use. |
Reviews
There are no reviews yet.