Content | Cameo CLPFLAT1TRI3WIR Tri-Colour-LED PAR Projector with IR Remote Control Capability
The Cameo CLPFLAT1TRI3WIR is a very flat, luminous PAR projector with seven 3 watt high power TRI LEDs, RGB colour spectrum, a 30° beam angle, rich features and lighting effects. It works completely silently. Thanks to minimal heat generation, no fan is required.
The CLPFLAT1TRI3WIR can be operated via an infrared remote control, 4 DMX modes, the integrated display with control buttons for Menu, Enter, Up and Down or external sound sources and as a master, slave and standalone.
The compact ABS housing with adjustable double bracket has XLR connectors for input and looping the DMX signal and IEC sockets as power supply and output; up to 10 projectors can thus be connected in series.
Set composed of:
- 4 x CLPFLAT1TRI3WIR
- 1 x CLPFLAT1REMOTE
CLPFLAT1TRI3WIR:
- Type: Flat PAR
- Colour spectrum: RGB
- Number of LEDs: 7
- LED type: 3 W TRI colour
- Beam angle: 30°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin female
- DMX mode: 2-channel, 3-channel-1, 3-channel-2, and 6-channel
- DMX functions: Colour Fade, Colour Jump, Master Dimmer, RGB, Sound Control, Strobe
- Standalone modes: Colour Jump, Colour Fade, Slave Mode, Sound Control, Static Colour, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: LED display
- Power supply: 110 V AC - 240 V AC / 50 - 60 Hz
- Power consumption: 25W
- Power connector: IEC power connector male/female
- Housing material: ABS
- Housing colour: black
- Dimensions without mounting bracket (WxHxL): 180 x 175 x 115 mm
|
Info
light source: 12 led luxeon, 1W, declared life 100.000 hours flicker free suitable also for TV studio protection rating: IP20 and IP66 dimmer/strobe: full range dimming synchronized or random strobe effect colour: infinite colours generated by convergent RGB colour beams beam angle: standard 12° various frontal lenses and filters to adjust the beam angle are available upon request (from 30° to 110°) automated functions: 4 different automatic programs of colour changing and fading adjustable execution time program synchronized master/slave ability able to operate the internal programs and their parameters via DMX 512 user interface: binary dip-switches, all functions emulated by DR 1 communication protocol: DMX 512 standard + bi-directional (with DR 1) power requirements: 90-250V 50/60Hz autosensing 0,18A @ 230V - 0,45A @ 115V item codes: 9180 PinLite Led silver.
|
Info
Reflection FullSpectrum Reflection is a revolutionary (patents pending) static LED fixture that brings an entirely new concept to this field of lighting: a compact, interchangeable, and modular light source ? just like a lamp in conventional fixtures ? that creates unmatched intensity by directing light from a unique combination of LEDs onto a parabolic reflector. This design also eliminates problems such as RGB dots and multi-coloured shadows which have plagued many other designs, delivering a unique, uniformly-coloured light beam. By moving the light source in relation to the reflector, this beam can also be zoomed smoothly via DMX from 10° to 17° (1/2 peak angle), 16° to 25° (1/10 peak angle).
|
18 x 8W QUAD Colour LED RGBW PAR Can in black housing
Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.
It is operated using four buttons and an LED display on the back.
The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.
There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.
The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.
- Type: Studio PAR 64
- Colour spectrum: RGBW
- Number of LEDs: 18
- LED type: 8 W QUAD colour
- Refresh rate: 5000 Hz
- Beam angle: 25°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin male
- DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
- DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
- Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
- Controls: Enter, Mode, Value Down, Value Up
- Indicators: LED display
- Power supply: 110 V AC - 250 V AC
- Power consumption: 170 W
- Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
- Housing material: metal
- Housing colour: black
Dimensions without mounting bracket
- Width: 230 mm
- Height: 220 mm
- Length: 255 mm
|
LED spotlight with 8x 8W RGBW 4-in-1 LED's+motorized zoom-EU+UK power cord. KingPAR 4 ZOOM - output: 6.500 Lux @ 1m - with 9-channel DMX-512 protocol - dimmer, strobe, auto, auto speed, custom programme, dimmer speed, RGBW colour changing - zoom: 15¡ to 60¡ - master/slave function - power consumption: 130W - metal housing - 4-button, 16-section display - passive cooling, no noise - also suitable as a stand-alone spotlight thanks to 2 adjustable mounting brackets - 3pin DMX input & output - IEC power input & output - dim. (LxWxH): 300 x 300 x 380mm - net weight: 3.85kg - for indoor use.
|
The Cameo CLPFLATPRO12 professional PAR light's super slim design thanks to its convection cooling construction makes it most suitable where space is limited and silent operation is required. 12 high performance 10 watt LEDs produce impressive RGBWA colour mixes from soft pastel hues to rich, warm tints with 16,000 lux and a 30° beam angle while the 3,000 Hz refresh rate eliminates flicker.
The CLPFLATPRO12 features 5 DMX modes with numerous functions, integrated programs and a built-in microphone for sound control. The illuminated LC display with 4 controls facilitates manual operation. The CLPFLATPRO12 also provides master, slave and standalone capability.
The Cameo CLPFLATPRO12 sports a black die-cast enclosure with both 3-pin and 5-pin XLR inputs and outputs for the DMX signal and Neutrik PowerCon sockets for mains supply and daisy-chaining. Its multifunctional bracket allows for a wide variety of mounting solutions.
- Colour Range: RGBWA
- Number of LEDs: 12
- LED Type: 10 W
- Beam Angle: 30°
- DMX Input: XLR 3-pole, XLR 5-pole
- DMX Output: XLR 3-pole, XLR 5-pole
- DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
- DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA, Sound Control
- Standalone Modes: Colour Jump, Colour Fade, Static Colour, Sound Control, Slave Mode, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: illuminated LC-Display
- Operating voltage: 110 - 240 V AC, 50 / 60 Hz
- Power consumption: 140 W
- Power Connector: Neutrik PowerCon in/out
- Housing Material: Metal
- Housing Colour: Black
- Type of cooling: Convection
- Illuminance (lx 1m): 16000 lx
- Dimensions (without mounting bracket): 230 x 230 x 135 mm
|
Reviews
There are no reviews yet.