| Content |
18 x 8W QUAD Colour LED RGBW PAR Can in black housing
Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.
It is operated using four buttons and an LED display on the back.
The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.
There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.
The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.
- Type: Studio PAR 64
- Colour spectrum: RGBW
- Number of LEDs: 18
- LED type: 8 W QUAD colour
- Refresh rate: 5000 Hz
- Beam angle: 25°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin male
- DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
- DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
- Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
- Controls: Enter, Mode, Value Down, Value Up
- Indicators: LED display
- Power supply: 110 V AC - 250 V AC
- Power consumption: 170 W
- Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
- Housing material: metal
- Housing colour: black
Dimensions without mounting bracket
- Width: 230 mm
- Height: 220 mm
- Length: 255 mm
|
The Cameo CLPFLATPRO18IP65 is purpose designed for outdoor use and rated IP65 according to EN 60529. With a powerful illuminance of 23,000 lux and a silent, passive cooling design the super slim professional PAR light is the perfect choice where space is limited. It features 18 ultra bright high performance 10 watt LEDs for impressive, rich RGBWA colour mixing, a 30° beam angle and 3,000 Hz refresh rate to eliminate flicker.
The CLPFLATPRO18IP65 provides master, slave and standalone capability and a total of 5 DMX modes with numerous functions, integrated programs and an LED Display with mode, enter, up and down controls for easy manual operation.
The Cameo CLPFLATPRO18IP65's black die-cast enclosure is protected against dust and low pressure water jets from all directions. It includes dedicated screw connectors for DMX signal and power input and output for daisy-chaining up to 10 units. The universal bracket offers a wide variety of mounting options.
- Colour Range: RGBWA
- Number of LEDs: 18
- LED Type: 10 W
- Beam Angle: 30°
- DMX Input: XLR 3-pole, XLR 5-pole
- DMX Output: XLR 3-pole, XLR 5-pole
- DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
- DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA
- Standalone Modes: Colour Jump, Colour Fade, Static Colour, Slave Mode, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: LED Display
- Operating voltage: 110 - 240 V AC, 50 / 60 Hz
- Power consumption: 200 W
- Power Connector: 3-pin special screw connector
- Housing Material: Metal
- Housing Colour: Black
- IP Class: 65
- Type of cooling: Convection
- Illuminance (lx 1m): 23000 lx
- Dimensions (without mounting bracket): 280 x 280 x 160 mm
|
Ultra-high performance LED PAR 64 with 18 ultra-bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 80 Watts. Like all new LED PAR cans, the CLP 64 TRI 3 WBS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.
It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.
- 18 ultra-bright 3-Watt TRI colour LEDs
- Beam angle of 25 degrees
- Low power consumption of just 80 Watts
- Operated via DMX (6 channels), in master/slave mode or standalone mode
- Integrated microphone for sound control
- Simple to operate using the four buttons and LED display
- Double bracket included as standard
- Cooling method: Fan
- Sturdy aluminium housing with polished or black finish
Specifications - Product: LED Par Can
- Type: PAR64
- Colour Range: RGB
- Number of LEDs: 18
- LED Type: 3 W TRI Colour
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 100 V AC - 250 V AC
- Power Consumption: 80 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Black
- Dimensions (without mounting brackets): 260 x 280 x 300 mm
|
Ultra-high performance LED PAR 64 with 18 ultra-bright 3-Watt TRI colour LEDs in a polished housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 80 Watts. Like all new LED PAR cans, the CLP 64 TRI 3 WPS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.
It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.
- 18 ultra-bright 3-Watt TRI colour LEDs
- Beam angle of 25 degrees
- Low power consumption of just 80 Watts
- Operated via DMX (6 channels), in master/slave mode or standalone mode
- Integrated microphone for sound control
- Simple to operate using the four buttons and LED display
- Double bracket included as standard
- Cooling method: Fan
- Sturdy aluminium housing with polished or black finish
Specifications - Product: LED Par Can
- Type: PAR64
- Colour Range: RGB
- Number of LEDs: 18
- LED Type: 3 W TRI Colour
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 100 V AC - 250 V AC
- Power Consumption: 80 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Polished
- Dimensions (without mounting brackets): 260 x 280 x 300 mm
|
LED spotlight with 8x 8W RGBW 4-in-1 LED's+motorized zoom-EU+UK power cord. KingPAR 4 ZOOM - output: 6.500 Lux @ 1m - with 9-channel DMX-512 protocol - dimmer, strobe, auto, auto speed, custom programme, dimmer speed, RGBW colour changing - zoom: 15¡ to 60¡ - master/slave function - power consumption: 130W - metal housing - 4-button, 16-section display - passive cooling, no noise - also suitable as a stand-alone spotlight thanks to 2 adjustable mounting brackets - 3pin DMX input & output - IEC power input & output - dim. (LxWxH): 300 x 300 x 380mm - net weight: 3.85kg - for indoor use.
|
The Cameo CLPSTTRI12IP is a heavy-duty PAR light with twelve 3-watt tri-color LEDs for smooth RGB colour mixing and a focused 25° beam angle. It is especially intended for professional outdoor applications featuring purpose-designed screw connectors and an IP65 rating.
The CLPSTTRI12IP can be controlled via DMX and provides a variety of colour macro, jump, fade and strobe functions. It is also capable of slave and standalone operation with Mode, Enter, Value Up and Down keys and a clear LED display permitting easy menu access.
The Cameo CLPSTTRI12IP is equipped with dual brackets that are easily adjustable for multiple mounting options.
- Product: LED Par Can
- Type: Outdoor PAR
- Colour Range: RGB
- Number of LEDs: 12
- LED Type: 3 W TRI Colour
- Beam Angle: 25°
- DMX Input: 3-pin special connector, screwable
- DMX Output: 3-pin special connector, screwable
- DMX Mode: 2-channel, 3-channel 1, 3-channel 2, 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Color Macro, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Connector: 3-pin special connector, screwable
- Operating voltage: 110 - 250 V AC / 50 - 60 Hz
- Housing Material: Metal
- Housing Colour: Black
- IP Class: 65
- Luminous intensity (lx 1m): 5900 lx
- Dimensions without mounting bracket: 203 x 203 x 193 mm
|
Reviews
There are no reviews yet.