Content | 18 x 8 W QUAD Colour LED RGBA PAR Light in Black Housing
The Cameo CLPST64RGBAQ8W is a professional Studio PAR 64 projector with a 25° dispersion angle in a classic black metal housing. 18 energy-efficient high-performance 8 Watt Quad LEDs in the RGBA-system(RGB additive Colour System plus amber LEDs) for a natural colour mix with a high light output, the extremely high refresh rate of 5,000 Hz for flicker-free operation and therefore also ideal for TV-production.
The CLPST64RGBAQ8W can be controlled in the DMX-modes with 2-channel, 3-channel 1, 3-channel 2, 4-channel and 7-channel and be used as a master, slave or stand-alone. The built-in microphone allows an external sound control. The DMX input and output is done via 3-pin XLR-connectors the operation of the Studio-PAR64 is done using buttons to select Mode, Enter, Up, Down, and a bright LCD display.
A double bracket with non-slip locking screws enables it to be used as a ground projector or to be mounted to trusses, walls and ceilings. The Cameo CLPST64RGBAQ8W is suitable for all universal mains voltages from 110 to 250 volts.
DMX512 - Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer)
Environment-friendly - The high energy efficiency the long service life of the LED lamps and the low level of heat dissipation make device particularly environment-friendly
LED technology - LEDs are ideal for use in lighting systems. They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & Slave - Master/Slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system plus amber LEDs - Amber is a colour that is outside the RGB spectrum.Additional amber LEDs allow warmer and richer colours to be created.
Music Control - In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone Mode - In standalone mode, the device functions are controlled via integrated programs, so no light mixer or "master" controller is required.
Product type
LED PAR Lighting
DMX output
XLR 3-pin female
DMX mode
2-channel, 3-channel 1, 3-channel 2, 4-channel, 7-channel
DMX Functions
colour fade, colour jump, master dimmer, RGBA, sound control, strobe
Standalone modes
colour fade, colour jump, colour macro, slave mode, sound control, static colour
Controls
Enter, Mode, Value Down, Value Up
Operating voltage
110 V AC - 250 V AC
Power connector
Power cord with safety plug (Type E / CEE 7/7)
Illuminance
12000lx (+/- 10%)
|
Info
LED ML-56 COB RGB 100W black Professional COB spot in DMX format Features: - Equipped with a 100 W COB LED - Functions: static colors, RGB color blend, internal programs, dimmer and strobe settings via DMX, Master/Slave - Dimmer speed (step response) adjustable - Operable in stand-alone mode or via DMX - 3 or 5 DMX channels selectable for numerous applications - Beam angle approximately 60° - Sound-control via built-in microphone - Adjustable microphone sensitivity via LCD display - Comfortable addressing and setting via Control Board with LCD display and four operating buttons - Locking possibility at the mounting bracket - With color filter frame - Optional barndoors available - Ready for connection with power cord and safety plug - DMX512 control possible via any commercial DMX controller - Available in silver or in black
|
Ultra-high performance LED PAR 64 with 18 ultra-bright 3-Watt TRI colour LEDs in a polished housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 80 Watts. Like all new LED PAR cans, the CLP 64 TRI 3 WPS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.
It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.
- 18 ultra-bright 3-Watt TRI colour LEDs
- Beam angle of 25 degrees
- Low power consumption of just 80 Watts
- Operated via DMX (6 channels), in master/slave mode or standalone mode
- Integrated microphone for sound control
- Simple to operate using the four buttons and LED display
- Double bracket included as standard
- Cooling method: Fan
- Sturdy aluminium housing with polished or black finish
Specifications - Product: LED Par Can
- Type: PAR64
- Colour Range: RGB
- Number of LEDs: 18
- LED Type: 3 W TRI Colour
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 100 V AC - 250 V AC
- Power Consumption: 80 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Polished
- Dimensions (without mounting brackets): 260 x 280 x 300 mm
|
Featuring 7 high performance 10 watt LEDs, 30° beam angle and 3,000 Hz refresh rate, the Cameo CLPFLATPRO7 professional PAR light allows for stunning RGBWA colour mixing. The super slim design is totally noise free thanks to its convection cooling construction and thus perfect wherever space is limited and quiet operation is a must.
With 5 DMX modes, numerous functions, integrated programs and a built-in microphone for sound control the CLPFLATPRO7 produces a huge range of colours from soft pastel hues to rich, warm tints. It incorporates an illuminated LC display with 4 controls for easy manual operation and provides master, slave and standalone capability.
The black die-cast enclosure includes both 3-pin and 5-pin XLR inputs and outputs for the DMX signal and Neutrik PowerCon sockets for mains supply and daisy-chaining. The Cameo CLPFLATPRO7's multifunctional bracket design offers a wide variety of mounting options.
- Colour Range: RGBWA
- Number of LEDs: 7
- LED Type: 10 W
- Beam Angle: 30°
- DMX Input: XLR 3-pole, XLR 5-pole
- DMX Output: XLR 3-pole, XLR 5-pole
- DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
- DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA, Sound Control
- Standalone Modes: Colour Jump, Colour Fade, Static Colour, Sound Control, Slave Mode, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: illuminated LC-Display
- Operating voltage: 110 - 240 V AC, 50 / 60 Hz
- Power consumption: 100 W
- Power Connector: Neutrik PowerCon in/out
- Housing Material: Metal
- Housing Colour: Black
- Type of cooling: Convection
- Illuminance (lx 1m): 12000 lx
- Dimensions (without mounting bracket): 180 x 180 x 133 mm
|
LED spotlight with 18 x 3W Cold and Warm White LED's + motorized zoom KingPAR 6 ZOOM - output: 6.750 Lux @ 1m - with 7-channel DMX-512 protocol - dimmer, strobe, cold white, warm white, color temperature presets, zoom, zoom speed - stepless zoom: 15¡ to 60¡ - master/slave function - power consumption: 90W - metal housing - 4-button, 16-section display - passive cooling, no noise - also suitable as a stand-alone spotlight thanks to 2 adjustable mounting brackets - 3pin DMX input & output - IEC power input & output - dim. (LxWxH): 300 x 300 x 380mm - net weight: 3.8kg - for indoor use. |
LED spotlight with 8x 8W RGBW 4-in-1 LED's+motorized zoom-EU+UK power cord. KingPAR 4 ZOOM - output: 6.500 Lux @ 1m - with 9-channel DMX-512 protocol - dimmer, strobe, auto, auto speed, custom programme, dimmer speed, RGBW colour changing - zoom: 15¡ to 60¡ - master/slave function - power consumption: 130W - metal housing - 4-button, 16-section display - passive cooling, no noise - also suitable as a stand-alone spotlight thanks to 2 adjustable mounting brackets - 3pin DMX input & output - IEC power input & output - dim. (LxWxH): 300 x 300 x 380mm - net weight: 3.85kg - for indoor use.
|
Reviews
There are no reviews yet.