| Content |
Ecolabel [3,16 MB]
User's manual [3,16 MB]
|
|
| |
The Cameo PixBar 500 PRO is a wide-angle, convection-cooled LED bar for professional use, equipped with 6 super-bright 12 Watt RGBWA+UV LEDs. It operates absolutely noiselessly and is flicker-free due to its high refresh rate of 3,600 Hz.
In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PixBar offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.
The fully RDM-enabled PixBar 500 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 7 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.
The aluminium housing of the Cameo PixBar 500 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.
SPECIFICATIONS:
- Item Number: CLPIXBAR500PRO
- Product Type: LED BAR
- Type: washer
- Colour Spectrum: RGBWA+UV
- Number of LEDs: 6
- LED Type: 12 W
- Refresh Rate: 3,600Hz
- Beam Angle: 23° at 600 lx, 41° at 1120 lx
- DMX Input: XLR 3-pin male, XLR 5-pin male
- DMX Output: XLR 3-pin female, XLR 5-pin female
- DMX Mode: 2-channel, 6-channel 1, 6-channel 2, 8-channel, 12-channel, 38-channel, 42-channel
- DMX Functions: Pixel Control, 14 Auto modes, Sound Mode, Colour macros, Dimmer, Strobe
- Standalone Modes: 14 Auto modes, Sound Mode, Static, Strobe
- Controls: Enter, Value Up, Value Down, Mode
- Indicators: LC display
- Power Supply: 110 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 90 W
- Power Connector: Neutrik PowerCon
- Housing Material: die-cast aluminium
- Housing Colour: black
- Cooling System: convection
- Illumination: single LED 1190 lx 1m
- Dimensions without mounting bracket:
- Width: 450 mm
- Height: 120 mm
- Length: 75 mm
|
|
- 12 ultra-bright 12 W RGBWA+UV LEDs
- IP65 classification for outdoor use
- Absolutely noiseless and flicker-free operation
- 7 DMX modes plus operation as a standalone, master or slave
- RDM enabled
- Bold primary colours, pastel and UV tones
- Colour macros that are adjusted for LEE filters
- Single Pixel Control for effective Chase effects
- Colour temperature correction
- 4 dimmer curves
- Neutrik powerCON TRUE1 and 5-pin X-HD power and DMX sockets
- Access lock against unauthorised changes to the menu settings
- Rugged housing made of die-cast aluminium
- Two diffusion filters and one lens hood included
Featuring 12 ultra bright 12 watt 6-in-1 LEDs and 22° beam width the Cameo PixBar 600 PRO IP65 creates impressive RGBWA+UV washes. Highly efficient convection cooling ensures noiseless performance, and with a 3,600 Hz refresh rate the IP65 rated outdoor fixture is flicker-free and suitable for TV and motion picture applications. The wash light comes with 2 diffusors to change beam and field angles from 22° and 72° to 52° and 92° while providing smooth lighting with minimum dazzle.
The PixBar 600 PRO IP65 is RDM enabled allowing bi-directional communication with a dedicated controller for addressing, configuration and status reporting. It provides 7 modes of DMX control and sports 14 automated lightshows, 4 selectable dimming curves, a strobe function and standalone, master or slave capability. The fixture includes single pixel control, color temperature correction and macros calibrated to the LEE filters standard for additional effects and flexibility.
The rugged aluminium enclosure features a backlit 4-button display with security lock to prevent unauthorized menu access, Neutrik X-HD series 5-pin DMX inputs and outputs and powerCON TRUE1 mains connectors.
Product type
LED Bars
Type
Outdoor
Colour spectrum
RGBWA+UV
Number of LEDs
12
LED type
12 W 6in1 colour
Dispersion
(Beam) 22° / (Field) 72 ° , (Beam) 52° / (Field) 92 °
Refresh rate
3600 Hz
DMX input
5-pin Neutrik X-HD
DMX output
5-pin Neutrik X-HD
DMX mode
12-channel , 2-channel , 6-channel 1 , 6-channel 2 , 74-channel , 78-channel , 8-channel
DMX Functions
14 auto modes , colour fade , colour jump , colour macro , Colour temperature correction , Dimmer , Single Pixel Control , strobe
Standalone modes
14 auto modes , static colour , strobe
Controls
Enter , mode , Value Down , Value Up
Indicators
backlit LCD
Operating voltage
110 V AC - 240 V AC / 50 – 60 Hz
Power consumption
160 W
Power connector
Neutrik powerCON TRUE1 IN (NAC3FX-W) / OUT (NACMFX-W)
Housing material
die-cast aluminium
Cooling
Convection
Cabinet colour
Black
Illuminance
1250lx @ 1m
Protection class IP
65
Operating Temperature
-15 - 45 °C
Dimensions without mounting bracket
Width
854 mm
Height
130 mm
Depth
90 mm
Weight
6,2 kg
|
The Cameo PixBar 650C PRO is a 53° beam width professional LED bar with 8 ultra bright 30 watt COB-LEDs for solid colour mixing with seamless transition. Highly efficient convection cooling and a 3,600 Hz refresh rate ensure absolutely noiseless operation and flicker free performance.
The PixBar 650C PRO is fully RDM compatible for bi-directional communication with a dedicated controller providing addressing, configuration and status reporting of the fixture. It is capable of standard DMX control in 5 modes and standalone, master or slave operation. The PixBar 450C PRO also features autorun software, a built-in microphone for sound control and a backlit display with Mode, Enter, Up and Down keys for manual control.
In addition to rich RGB colours and macros calibrated to the LEE filters standard the PixBar 650C PRO provides colour temperature correction, 4 selectable dimming curves and single pixel control for impressive chase effects.
The fixture's rugged aluminium enclosure features 3 and 5-pin DMX inputs and outputs, Neutrik powerCON mains connectors and an adjustable stand that doubles as mounting bracket.
- Product number: CLPIXBAR650CPRO
- Product type:LED BAR
- Type: Washer
- Colour spectrum: RGB
- Number of LEDs: 8
- LED type: 30W COB
- Refresh rate: 3000Hz
- Dispersion: 53°
- DMX input: XLR 3-pin male, XLR 5-pin male
- DMX output: XLR 3-pin female, XLR 5-pin female
- DMX mode: 2-channel, 3-channel, 3-channel, 9-channel, 30-channel
- DMX functions: Pixel Control, 13 Auto-Modes, Sound Mode, Colour Macros, Dimmer, Strobe, Colour temperature correction
- Standalone modes: Auto Run, 14 Auto-Modes, Sound Mode, Static,Strobe
- Controls: Mode,Enter,Up,Down
- Indicators: LC-Display
- Operating voltage: 110 V AC - 240 V AC / 50 - 60 Hz
- Power consumption: 250W
- Power connector: Neutrik powerCON
- Housing material: Aluminium
- Cabinet colour: black
- Cooling: Convection
- Illuminance: 3770lx 1m
- Dimensions without mounting bracket
- Width: 880mm
- Height: 110mm
- Depth: 130mm
- Dimensions of mounting brackets (incl. rubber feet) 495 x 140 x 100 mm
|
Item no. 51930398
LED bar (110 cm) with 12 x 4 watt 4in1 LED (RGBW)
- 12 powerful LEDs 4 W high-power 4in1 QCL RGBW (homogenous color mix)
- Color change adjustable; Dimmer electronic; color blend stepless
- Strobe effect
- The device is cooled by passive convection cooling
- Control via stand-alone; DMX; Sound to light via Microphone; QuickDMX via USB (optional); W-DMX by wireless solution (optional); CRMX by LumenRadio (optional)
- Flicker-free
- With a beam angle of 17°
- With Mounting bracket
- 4 digit 7-segment LED display
- Preprogrammed in LED PC-Control 512; EASY SHOW 1; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE; Light Captain; Light´J
- Silent operation
- Mains input and output for power linking up to 8 units
Package contents
- 1 x light effect, 1 x user manual, 1 x power cord, 2 x mounting bracket, 2 x washer, 2 x knurled screw
| Power supply: |
100-240 V AC, 50/60 Hz |
| Power consumption: |
24 W |
| IP classification: |
IP20 |
| Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
| Power output: |
1 x IEC connector (F) mounting version |
| Lamp type: |
LED lamp |
| LED: |
12 x 4 W high-power 4in1 QCL RGBW (homogenous color mix) |
| Flash rate: |
0 - 20 Hz |
| DMX channels: |
2; 4; 5; 6; 9 |
| DMX input: |
3-pin XLR (M) mounting version |
| DMX output: |
3-pin XLR (F) mounting version |
| Cooling: |
Passive convection cooling |
| Control: |
Stand-alone; DMX; Sound to light via Microphone; QuickDMX via USB (optional); W-DMX by wireless solution (optional); CRMX by LumenRadio (optional); LED PC-Control 512; EASY SHOW 1; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE; Light Captain |
| Beam angle: |
17° |
| Beam angle (1/2 peak): |
17° |
| Beam angle (1/10 peak): |
33° |
| Housing color: |
Black |
| Attachment system: |
Mounting bracket |
| Display type: |
4 digits 7-segment LED display |
| Dimensions: |
Length: 1,085 m
Depth: 6,5 cm
Height: 10 cm |
| Weight: |
2,85 kg |
| Noise classification: |
Class 0 (no noise at all) |
| Legal specifications |
| Special product: |
Not designed for household room illumination |
| Intended use: |
Show effect lighting |
| Cable length: |
Approx. 1,1 m |
| Mounting bracket |
| Pieces: |
2 Stk |
| Diameter mounting holes: |
1 x Ø20mm; 1 x Ø11mm; 1 x Ø8mm; 2 x Ø7mm |
| Material: |
Metal, 2 mm |
| Legal specifications |
| Special product: |
Not designed for household room illumination |
| Intended use: |
Show effect lighting |
|
| Power supply: |
100-240 V AC, 50/60 Hz |
| IP classification: |
IP20 |
| Protection class: |
Protection class I |
| Power connection: |
Battery/battery pack
Mains input via P-Con (blue), mounting version power supply cord with safety plug (provided) |
| Battery pack type: |
1 x lithium ion 11,1 V, 10400 mAh, 115,44 Wh |
| Battery pack: |
Battery operation up to 13h depending on program used
Recharging time 4h |
| Lamp type: |
LED lamp |
| LED: |
30 x 0,25 W SMD 5050 4in1 QCL RGBW (homogenous color mix)
6 x 8 W high-power 4in1 QCL RGBW (homogenous color mix) |
| DMX channels: |
3; 7; 8; 9; 11 |
| DMX input: |
3-pin XLR (M) mounting version |
| DMX output: |
3-pin XLR (F) mounting version |
| Cooling: |
Passive convection cooling |
| Control: |
Stand-alone; DMX; QuickDMX; IR remote control; Sound to light via Microphone; Light´J; LED PC-Control 512; Master/slave function; Light Captain; EASY SHOW 1; EASY SHOW 2; EASY SHOW 3 |
| Beam angle: |
15° |
| Beam angle (1/2 peak): |
15° |
| Beam angle (1/10 peak): |
30° |
| Housing color: |
Black |
| Display type: |
Multicolor LCD display |
| Carrier frequency: |
2,4 GHz |
| Theft protection: |
KENSINGTON LOCK |
| Dimensions: |
Length: 41,1 cm
Depth: 9,5 cm
Height: 10,5 cm |
| Weight: |
2,80 kg |
| Noise classification: |
Class 0 (no noise at all) |
| Remote control |
| Battery: |
1 x Button cell 3.0 V CR2032 lithium manganese built-in |
| Legal specifications |
| Special product: |
Not designed for household room illumination |
| Intended use: |
Show effect lighting |
|
Ecolabel [3,46 MB]
User's manual [3,16 MB]
|
|
| | 12 x 12 W RGBWA+UV LED Bar black
The Cameo PixBar 600 PRO is a wide-angle, convection-cooled LED bar for professional use, equipped with 12 super-bright 12 Watt RGBWA+UV LEDs. It operates absolutely noiselessly and is flicker-free due to its high refresh rate of 3,600 Hz.
In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PixBar offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.
The fully RDM-enabled PixBar 600 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 7 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.
The aluminium housing of the Cameo PixBar 600 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.
SPECIFICATIONS:
- Item Number: CLPIXBAR600PRO
- Product Type: LED BAR
- Type: washer
- Colour Spectrum: RGBWA+UV
- Number of LEDs: 12
- LED Type: 12 W
- Refresh Rate: 3,600 Hz
- Beam Angle: 23° at 600 lx, 41° at 1120lx
- DMX Input: XLR 3-pin male, XLR 5-pin male
- DMX Output: XLR 3-pin female, XLR 5-pin female
- DMX Mode: 2-channel, 6-channel 1, 6-channel 2, 8-channel, 12-channel, 74-channel, 78-channel
- DMX Functions: Single Pixel Control, 14 Auto modes, Sound Mode, Colour macros, Dimmer, Strobe
- Standalone modes: 14 Auto modes, Sound Mode, Static, Strobe
- Controls: Enter, Value Up, Value Down, Mode
- Indicators: LC display
- Power Supply: 110 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 160 W
- Power Connector: Neutrik PowerCon
- Housing Material: aluminium/metal
- Housing Colour: black
- Cooling System: convection
- Illumination: single LED 1190 lx 1m
- Dimensions without mounting bracket:
- Width: 900 mm
- Height: 120 mm
- Length: 75 mm
|
|
Reviews
There are no reviews yet.