Small Signal Parameters
D (m/in) | 0.26/10.24 |
Fs (Hz) | 56.4 |
Mmd (g/oz) | 54.41/1.92 |
Mair | 6.92/0.244 |
Qms | 2.74 |
Qes | 0.33 |
Qts | 0.29 |
Re (Ω) | 5.77 |
Vas (lt/ft3) | 51.78/1.828 |
BI (Tm) | 19.61 |
Cms (mm/N) | 0.13 |
Rms (kg/s) | 7.921 |
Le (mH) | 0.778 |
Mounting Information
Overall diameter (mm/in) | 310/12.2 |
Overall depth (mm/in) | 137/5.39 |
Cut-out diameter (mm/in) | 286/11.26 |
Mounting slot dimensions (mm/in) | 6.5/0.26 x 9.5/0.37 |
Number of mounting slots | 8 |
Mounting slot PCD range (mm/in) | 294/11.57 |
Unit weight (kg/lb) | 2.6/5.7 |
Packed Dimensions and Weight
Single pack size W x D x H (mm/in) | - |
Single pack weight (kg/lb) | - |
Multipack (60) size W x D x H (mm/in) | 1080 x 980 x 880/42.5 x 38.6 x 34.6 |
Multipack (60) weight (kg/lb) | 146/321 |
2000 W continuous program power capacity |
|
100 mm (4 in) copper voice coil |
|
45 – 1000 Hz response |
|
95 dB sensitivity |
|
Aluminium demodulating ring allows a very low distortion figure |
|
Double silicone spider with optimized compliance |
|
Ventilated voice coil gap for reduced power compression |
|
This classic guitar speaker actually started life as a radio speaker that was modified specifically for use in electric guitar amplifiers. In its original incarnation as the G12 T530 it appeared in several colour variations, but it was the Blue version, fitted as standard into Vox AC30 amps, that secured its place in guitar tone history.
The Blue found favour with notable guitarists like Brian May, due to its glorious dampened attack, warm lows, mellow upper-mids and brilliant belllike top-end. When coupled with a suitable amplifier it evokes rich definition and develops beautiful musical compression when pushed. According to tone enthusiasts worldwide, the Blue is the benchmark for guitar speaker perfection.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 15W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 100dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Round copper | Magnet type | Alnico | Frequency range | 75-5000Hz | Resonance frequency, Fs | 75Hz | DC resistance, Re | 6.4Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 6.5“, 165mm | Magnet structure diameter | 5.0“, 128mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 9.3lb, 4.2kg |
|
For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.
General specifications Nominal diameter (mm/in) | 305/12 | Power Rating (AES, W rms) | 250 | Nominal impedance (Ω) | 8 | Voice coil diameter (mm/in) | 63.5/2.5 | Magnet type | Ceramic | Magnet weight (kg/oz) | 1.2/42 | Chassis type | Pressed steel | Sensitivity (dB) | 97 | Frequency range (Hz) | 40-4000 | Coil material | Round copper | Former material | Polyimide | Cone material | Kevlar loaded paper | Surround material | Cloth-sealed | Suspension | Single | Xmax (mm/in) | 2.4/0.09 | Gap depth (mm/in) | 8.0/0.31 | Voice coil winding width (mm/in) | 12.7/0.50 | Small Signal Parameters D (m/in) | 0.26/10.24 | Fs (Hz) | 63 | Mmd (g/oz) | 39.60/1.40 | Mair | | Qms | 6.70 | Qes | 0.54 | Qts | 0.50 | Re (Ω) | 5.13 | Vas (lt/ft3) | 54.5/1.92 | BI (Tm) | 13.20 | Cms (mm/N) | 0.14 | Rms (kg/s) | 2.76 | Le (mH) | | Mounting Information Overall diameter (mm/in) | 309/12.17 | Overall depth (mm/in) | 130/5.12 | Cut-out diameter (mm/in) | 283/11.14 | Mounting slot dimensions (mm/in) | Ø 7.9/0.31 | Number of mounting slots | 4 | Mounting slot PCD range (mm/in) | 297/11.69 | Unit weight (kg/lb) | 4.1/9.0 | Packed Dimensions and Weight Single pack size W x D x H (mm/in) | 330 x 330 x 150/13.0 x 13.0 x 5.9 | Single pack weight (kg/lb) | 3/6.6 | Multipack (60) size W x D x H (mm/in) | 1080 x 980 x 880/42.5 x 38.6 x 34.6 | Multipack (60) weight (kg/lb) | 190/419 |
| The B&C 12NW100 speaker is designed to produce bass, it is typically a 12 inch usable as a bass power speaker in a subwoofer for a compact system often transported. The 12NW100 will delight you with bass-reflex or band-pass load, its significant admissible electrical power makes it a real machine for producing bass, however, special care must be taken with the amplification dedicated to it.
2000 W continuous program power capacity
100 mm (4 in) copper voice coil
45 - 1500 Hz response
96 dB sensitivity
FEA optimized Neodymium magnet assembly
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
General
|
Product type |
Cone driver |
Brand |
B&C Speakers |
Reference |
12NW100 |
Product code |
ALT12NW1008 |
Informations
|
Nominal impedance |
8 ohm |
Dimensional category |
12.5 inch |
Frequency coverage type |
Sub, Low, Midbass |
Manufacturer sensitivity |
96 dB |
Calculated sensitivity |
93.76 dB |
Nominal power handling |
1000 W |
Bandwidth |
45÷1500 Hz |
Fundamental parameters
|
Sd |
531 cm² |
Mms |
119 gr |
Le |
1.9 mH |
Re |
5.1 ohm |
BL |
28 T.m |
Small signal parameters
|
Fs |
42 Hz |
Qes |
0.21 |
Qms |
3.6 |
Qts |
0.2 |
Vas |
44 L |
Datas
|
Xmax |
±9 mm |
Calculated Xmax |
±10.5 mm |
EBP |
200 Hz |
Zmin |
6.2 ohm |
Fs / Qts |
210 Hz |
Vas * Qts² |
1.76 L |
Efficiency |
1.7 % |
Calculated efficiency |
1.5 % |
Weight |
~8.2 kg |
Recommended load volume |
50 L |
Fréquence d'accord liée à la charge |
50 Hz |
Dimensions
|
Voice coil diameter |
4 inch |
Winding depth |
25 mm |
Gap height |
12 mm |
Outside diameter |
319 mm |
Baffle cutout diameter |
281 mm |
Front thickness |
13 mm |
Depth after front |
124 mm |
Shape & Materials
|
Front chape |
Cylindrical |
Magnet type |
Neodymium |
Basket masterial |
Aluminium |
Winding material |
Copper |
Voice coil former |
Glass fiber |
|
DELTA PRO Series 400W
Recommended for professional audio in both sealed and vented enclosures. Ideal for full-range, mid/hi, and monitor wedges.
SPECIFICATION
- Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 400 W / Music Program 800 W
- Resonance 51 Hz
- Usable Frequency Range 52 Hz - 4.5 kHz
- Sensitivity 99.2
- Magnet Weight 80 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 51 Hz
- DC Resistance (Re) 5.71
- Mechanical Q (Qms) 7.56
- Electromagnetic Q (Qes) 0.37
- Total Q (Qts) 0.35
- Compliance Equivalent Volume (Vas) 81.7 liters, 2.9 cu.ft.
- Peak Diaphragm Displacement Volume 242 cc
- Mechanical Compliance of Suspension (Cms) 0.21 mm/N
- BL Product (BL) 15.3 T-M
- Diaphragm Mass inc. Airload (Mms) 48 grams
- Efficiency Bandwidth Product (EBP) 138
- Maximum Linear Excursion (Xmax) 4.6 mm
- Surface Area of Cone (Sd) 532.4 cm2
- Maximum Mechanical Limit (Xlim) 13.7 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed 28-35 liters/1-1.25 cu.ft. Vented 31-91 liters/1.1-3.2 cu.ft.
- Overall Diameter 12.38“, 314.5 mm
- Baffle Hole Diameter 11.07“, 281 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.27“, 6.9 mm
- Mounting Holes B.C.D. 11.57“, 293.8 mm
- Depth 6.22“, 158 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented and extended core
- Die-cast aluminum basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
| Weight | 2.60 kg | 11.80 kg | 4.20 kg | 3.00 kg | 9 kg | 3.00 kg |
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.